Ingersoll Rand 650718-C - Manual
Ingersoll Rand 650718-C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – OPERATING INSTRUCTIONS; EXCESSIVE AIR PRESSURE. Can cause pump; INSTALLATION; IMPORTANT
- Page 4 – PARTS LIST
- Page 5 – Torque Sequence; Tab
- Page 6 – Indicates parts included in 637118-C air section repair kit.; AIR MOTOR SECTION SERVICE; ent spacer legs away from blocking internal ports.; AIR MOTOR PARTS LIST
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 5; DIMENSIONS
OPERATOR’S MANUAL
650718-C
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 8-11-03
REVISED:
12
-2-
10
(REV. 0
8
)
1-1/2" DIAPHRAGM PUMP
U.L. LISTED, 1:1 RATIO, METALLIC
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
637118-C for air section repair (see page 6).
637138-63 for fl uid section repair (see page 4).
PUMP DATA
Models
. . . . . . . . . . . . . . . . . . . 650718-C
Application
. . . . . . . . . . . . . . Diesel Fuel, Kerosene, Aviation
Fuel, Fuel Oil and Unleaded Fuel
Pump Type
. . . . . . . . . . . . . . . U.L. Listed Metallic Air Operated
Double Diaphragm for use with
Petroleum Product Dispensing
Systems
Material
. . . . . . . . . . . . . . . . . . see Model Description Chart
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.44 lbs (27.4 kgs)
Maximum Air Inlet Pressure
. . . . . . . . 50 p.s.i.g. (3.4 bar)
Maximum Outlet Pressure
. . . . . . . . . . 50 p.s.i.g. (3.4 bar)
Maximum Flow Rate
(fl ooded inlet)
. . . 75 g.p.m. (283.9 l.p.m.)
Displacement / Cycle @ 100 p.s.i.g.
. 0.64 gal. (2.42 lit.)
Maximum Particle Size
. . . . . . . . . . . . . 1/4” dia. (6.4 mm)
Maximum Temperature Limits (diaphragm / ball / seal /
seat material)
Acetal . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Kynar® PVDF . . . . . . . . . . . . . . 10° to 200° F (-12° to 93° C)
Viton® . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . see page 8
Noise Level
@ 70 p.s.i., 60 c.p.m. . . . . . . 77.7 db(A)
c
c
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
MODEL DESCRIPTION CHART
Diaphragm Material
8 - Viton
Center Body Material
Aluminum
Fluid Connection
1-1/2 - 11-1/2 N.P.T.F. - 1
Fluid Cap / Manifold Material, Hardware
Aluminum / Aluminum, Steel hardware
Seat Material
Kynar
PVDF
Ball Material
Acetal
Figure 1
65071 8 - C
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
CCN 15
201429
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 650718-C (en) WARNING EXCESSIVE AIR PRESSURE. Can cause per- sonal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by this pu...
650718-C (en) Page 3 of 8 y Loctite® is a registered trademark of Henkel Loctite Corporation y ARO® is a registered trademark of Ingersoll-Rand Company y 262™, 271™ and 572™ are trademarks of Henkel Loctite Corporation y y Kynar® is a registered trademark of Arkema Inc. y Viton® is a registered trad...
Page 4 of 8 650718-C (en) PARTS LIST / 650718-C FLUID SECTION n 637138-63 fl uid section service kits include: Balls (item 22), diaphragms (item 7) plus items 2, 3, 19 and 93706-1 Key-Lube grease (page 6). MATERIAL CODE [A] = Aluminum[B] = Nitrile[Br] = Brass[C] = Carbon Steel [Co] = Copper[D] = Ace...
