Ingersoll Rand 650295 - Manual
Ingersoll Rand 650295 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
OPERATOR’S MANUAL
650295
RELEASED: 6–27–95
(REV. A) IPP
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
PUMP SYSTEM
ALSO INCLUDE MANUALS: 650691-X PUMP, 651616-X TWO POST LIFT/RAM & 65940 AIR MANIFOLD
23:1 RATIO
6” AIR MOTOR
6” STROKE
650295
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
CARBON STEEL
THE ARO CORPORATION
D
ONE ARO CENTER
D
BRYAN, OHIO 43506–0151
E
1995 THE ARO CORPORATION
D
PRINTED IN U.S.A.
&
(419) 636–4242
D
FAX (419) 636–2115
1
2
3
Control Panel
(See Page 2)
Material
Outlet
FIGURE 1
4
F033
SERVICE KITS
•
Use only genuine ARO replacement parts to assure compatible
pressure rating and longest service life.
•
61355 for repair of Air Motor Section.
•
637071-XXX for repair of Lower Pump 66243-X.
GENERAL DESCRIPTION
WARNING
DO NOT EXCEED MAXIMUM OPERATING
PRESSURE OF 4,215 P.S.I. (294 BAR) AT 150 P.S.I. (10.4 BAR)
AIR INLET PRESSURE.
WARNING
REFER TO GENERAL INFORMATION SHEET
FOR ADDITIONAL SAFETY PRECAUTIONS AND IMPORĆ
TANT INFORMATION.
By delivering a smooth, continuous bead of the proper size, an ARO
system helps the operator maintain both his production rate and proĆ
duce quality standards. Maintained quality standards assures that the
material benefits are realized. To further maximize operator production
time, the ARO System has a built-in lift/ram feature for quick and easy
drum changeover.
ARO Systems are totally enclosed, sealing the material in the system
from air and moisture, preventing premature cure-out of the material.
This allows for either continuous or intermittent use of the system and
reduces the need for daily system clean-up.
Built-in lift capability allows for quick drum changeover and easy lifting
of pump assembly from container.
The 23:1 ratio is an expression of the relationship between the effecĆ
tive air motor area and the effective lower pump area. When 150 PSI
(10 bar) of air pressure is supplied to the air motor, the lower pump area
will develop a maximum of 4,215 PSI (294 bar) of fluid pressure (at no
flow) as the fluid control is opened, the flow rate will increase as the air
motor cycle rate increases to keep up with the demand.
MAJOR COMPONENTS LIST
Item Description
Qty Part No.
Item Description
Qty Part No.
1 Two Post Ram
1 67081
3 Basic Pump Assembly
1 650891-G43
2 Follower Plate
1 66516-1
4 Air Manifold
1 65940
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
