Page 2 - in all EU member states. Please follow the guidance of your local; FCC Warning; authority to operate the equipment.; CE Warning; This product is considered Class A for EU market.; Canada
1 Declaration of Conformity Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon 97223-8368 USAWe declare under our sole responsibility that this projector conforms to the following directives and norms: ErP Directive 2009/125/ECEMC Directive 2004/108/ECEMC: EN 55022...
Page 3 - Agency Approvals
2 Agency Approvals cMETusOther specific Country Approvals may apply. Please see product certification label.This document applies to regulatory model IN2128HDaInput ratings: 100-240Vac, 3.2A, 50-60HzInFocus reserves the right to alter product offerings and specifications at any time without notice.
Page 5 - Important Operating Considerations for Safety
4 Important Operating Considerations for Safety • Refer to this guide for proper startup and shutdown procedures. • Follow all warnings and cautions in this manual and on the projector. • Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate the projector at leas...
Page 6 - Introduction; Product specifications; support; Online registration
5 Introduction Your new digital projector is simple to connect, easy to use, and straightforward to maintain. It is a versatile projector that is flexible enough for business presentations and home video viewing too. IN2128HDa has native 1080p 1920 x 1080 resolution. It is compatible with a wide var...
Page 7 - Connector panel
6 Connector panel The projector provides both computer and video connection options, including:• VGA computer (2) • Composite video • HDMI • S-video • USB B connector (for projector firmware upgrades, mouse control, Screen Save Preventer, and optional LiteBoard™wand) • USB Mini B (for Display over U...
Page 8 - Positioning the projector; on page 28. We recommend using an InFocus authorized ceiling mount.
7 Positioning the projector To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines:• Position the projector on a flat surface...
Page 9 - Connecting a computer source; Power; MOLEX
8 Connecting a computer source VGA connection Connect one end of the provided computer cable to the Computer 1/Computer 2 connector on the projector and the other to the VGA connector on your computer. If you are using a desktop computer, you will need to disconnect the monitor cable from the comput...
Page 10 - Displaying an image
9 Displaying an image Press the Power button. The Power LED lights blue, and the fans start to run. When the lamp comes on, the start up screen displays. It can take up to a minute for the image to achieve full brightness. Note: When the feature, AC Power On, is enabled, the projector automatically ...
Page 11 - Adjusting the image; Keystone
10 Adjusting the image If necessary, adjust the height of the projector by rotating the elevator foot to extend the foot. If necessary, rotate the leveling foot located at the rear of the projector. Avoid placing your hands near the hot exhaust vent at the front of the projector. Position the projec...
Page 12 - Connecting a video device; Video device connections; VGA connection; Video; Audio
11 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projector. You can connect the audio directly to the projector to get sound from the built-in speaker, or you can bypass the pr...
Page 13 - Shutting down the projector; Auto Off Time; Troubleshooting your setup; Table 2: Indicator Lights; Status Indicator Light
12 Shutting down the projector Auto Off Time The projector also has an Auto Off Time feature that automatically turns the projector off after no active sources are detected and no user interaction with the projector is performed for 30 minutes. By default, this feature is off. You can change the len...
Page 14 - Startup; Restart laptop
Problem Solution Result No start up screen Plug power cord into the projectorpress the Power button Startup Screen Correct image A Startup Screen Only start up screen appears Restart laptop Press the SOURCE button.activate laptop’s external port A A Computer image projected 13
Page 15 - Computer image projected
14 Problem Solution Result No computer image, just the words “Signal out of range” A Signal out of the range Press the Auto Image button on remoteAdjust computer refresh rate (Windows 7: Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab). Varies per operating ...
Page 18 - COLOR
A 17 Image upside down Aspect Ratio Auto Image Brightness Contrast Auto Keystone Keystone Presets Sharpness Volume Ceiling Mount Advanced Menu Auto Execute 50 50 Off 0 Presentation 16 16 ◄ Off ► ( Basic Menu ) MDL: IN2128HDa FW: X.XX Turn off Ceiling Mount in Basic menu Correct image Image reversed ...
Page 21 - Using the remote control; Troubleshooting the remote
20 Using the remote control The remote uses two (2) AAA batteries (not provided). They are easily installed by removing the cover from the remote’s back, aligning the + and - ends of the batteries, sliding them into place, and then replacing the cover.Caution: • When replacing the remote batteries, ...
Page 22 - Using the audio; Using the projector’s speaker; through the projector speakers.; Troubleshooting Audio; Make sure the correct source is active.; connect audio cable
21 Using the audio Using the projector’s speaker Connect the audio source to the Audio 1/Audio 2 connectors to hear audio through the projector speakers. Amplified speakers may also be connected to the projector using the Audio Out connector. To adjust the volume, press the Volume buttons on the rem...
Page 23 - Using the keypad buttons; Auto - Resynchronizes the projector to the source.
22 Using the keypad buttons Most buttons are described in detail in other sections, but here is an overview of their functions:Power–turns the projector on and off (page 9). Right arrow - When the menu is displayed, the right arrow button navigates through the menu. Up arrow/Keystone - When the menu...
Page 24 - Optimizing computer images; settings will be saved in that Preset.; Presentation features; and current source. See page 28 for details.
23 Optimizing computer images After the projector is running and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 25.• Select the User Preset in the Basic Menu before optimizing images and the settings will be saved...
Page 26 - Using the menus; Press the Menu button to exit the menu system.
25 Using the menus 1 To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and down to review the menu options. 2 To enter a submenu, highlight the desired submenu and press > ...
Page 27 - increasing keystone
26 Basic Menu To adjust the following settings, highlight the setting, use the right and left arrows to adjust the values.Aspect Ratio: Aspect ratio is the ratio of the image width to image height. TV screens are usually 4:3. HDTV and most DVDs are 16:9.Select Auto to have the projector choose the r...
Page 32 - Multimedia EZ Suite Menu; EZ Media
31 Multimedia EZ Suite Menu Use the arrow keys to navigate up and down, left and right. The right-hand menus change based on the left-hand menu selection. To select a menu option, press the right-hand arrow. To return to the previous EZ Suite menu (and ultimately the EZ Suite main menu), press the M...
Page 34 - When a video is playing; To open the Video Viewer toolbar: press the Menu key.; Rewind
33 When a video is playing moviesample.mp4 00:00:02 00:00:00 00:04:12 • To open the Video Viewer toolbar: press the Menu key. • To stop the video or return to video playlist: press the Select/Enter key when the toolbar is closed. • To pause/play the video file: Press the Select/Enter key to pause an...
Page 35 - To return to audio playlist: press the Menu key.
USB EZ Suite Internal Memory Photo Video Music Office viewer Press to Exit Music 34 Music mode Key Action Up Go to the previous audio file Down Go to the next audio file Left Display the sort type Select/Enter Play the audio file Menu Exit audio playlist and return to EZ Suite main menu The audio pl...
Page 40 - MAC Address
39 Wired LAN connection Internet IP Router 1 Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port . 2 Press Menu on the keypad or remote and then go to Advanced Menu > Setup > Network > Wired LAN menu. DHCP IP Address Subnet Ma...
Page 41 - InFocus wireless dongle; How to setup AP mode:; Make sure the projector is turned on.; Write down the IP address for network connection.; How to setup client mode:; Select Multimedia from source list.
40 Wireless LAN connectionTo connect to the projector wirelessly, you need to plug an optional InFocus wireless dongle (p/n SP-WIFIUSB-2) to the USB Type A connector on the projector. InFocus wireless dongle (p/n SP-WIFIUSB-2) How to setup AP mode: 1 Make sure the projector is turned on. 2 Select Mu...
Page 42 - EZ Suite Settings
41 Setup > Network > Wirless LAN menu. SSID IP Address Subnet Mask Previous 135 192. 168. 43. 10 255. 255. 255. 0 ( Wireless LAN ) MDL: IN2128HDa FW: X.XX EZ Mobile EZ Mobile allows you to connect wirelessly to a media server and DLNA enabled devices. Refer to the EZ Mobile guide on www.infocu...
Page 43 - Web controlling the projector; To download EZ Display, click Download. See page 46 for details.
Photo Description Display Ratio Sets the display (aspect) ratio Slideshow Pattern Enables slide show mode Slideshow Duration Sets the time interval each image displays Music Description Repeat Mode Sets repeat mode WiFi Description AP Mode Sets AP mode on/off. AP mode is set to ON by default. See pa...
Page 44 - If you forget the password, please go to Advanced Menu > Setup >; Network Settings: Provides network settings.; About Crestron e-Control; The Crestron e-Control; Source List: To switch the source, click on the desired source.
43 3 To access the Admin page, enter the password. The default password is “0000”. If you forget the password, please go to Advanced Menu > Setup > Network > Restart Network to restore the password to the default code . • Information: Displays the status, wired LAN, and wireless LAN informa...
Page 45 - Category Item
44 2 The Tools page allows you to manage the projector, configure the LAN control settings and remotely access the network operations of this projector. iii ii i i. This area is only used with a Crestron Control System. Please contact Cre-ston or refer to the Crestron user manual for setup informati...
Page 46 - Crestron RoomView
45 3 The Info page displays the information and status of this projector. Press exit to go back to the Crestron remote network operation page. 4 After pressing the Contact IT Help button, the Title window will display in the upper right corner of the screen. You will be able to send messages to Room...
Page 47 - Displaying Images through EZ Display; Installation for Windows and Macintosh
46 Displaying Images through EZ Display Installation for Windows and Macintosh EZ Display is an application which can run on the host PC. It helps connect your computer to an available network projector and transfer the desktop content to the network projector via local network connection. 1 Access ...
Page 48 - Using EZ Display; Projecting from Smartphones/Tablets; documents, webpages and photos and save them for sharing.; System Requirements; iOS; Installation for Android and iOS; Search for “EZ Display” and “EZ Remote” in Google Play or App Store, then; Start up
iii iv v i ii 47 Using EZ Display i. Split Screen: Display up to 4 computers or mobile devices in Split Screen using the 1, 2, 3, 4 buttons or 2 displays using the L and R buttons. ii. Mirror/Extended Display: To duplicate your computer display onto the pro-jector, click Mirror. To extend your deskt...
Page 49 - EZ Remote; *Skin button is reserved for future feature.
iOS screen Android screen 48 EZ Remote Launch EZ Remote. You will see the connected device shown on the device list. Click it to enable Remote control. iOS screen Android screen *Skin button is reserved for future feature. EZ Display Launch EZ Display and it will scan for and list the device's IP ad...
Page 50 - EZ Display: Streaming Doc and Doc Viewer; organized by their format type.; EZ Display: Pix Viewer
49 EZ Display: Streaming Doc and Doc Viewer To stream your documents, transfer the documents you want from the computer to your mobile device and disconnect your mobile device. Documents will be organized by their format type. Select a file to display it wirelessly. Click the Sketch icon to begin dr...
Page 51 - EZ Display: Streaming Web; Android screen; connected to the internet. See page 40 for more details.; iOS screen
50 EZ Display: Streaming Web The web browser will be displayed over WiFi. The Sketch and Save functions are also supported. This feature requires a Client Mode internet connection. See page 40 for more details. Select web browser. The default home page is www.google.com Android screen iOS screen Pas...
Page 52 - EZ Display: Split Screen; Supports all web, sketch and other functions except EZ Stream.
51 EZ Display: Split Screen EZ Display allows up to 4 different sources to be displayed in the same screen.NOTE:• Hybrid OS support: Windows, Mac OS, iOS, and Android • Supports all web, sketch and other functions except EZ Stream. Android screen iOS screen
Page 53 - LiteBoardTM Wand; with all your software, just like a regular mouse.; Charging the Wand’s Battery; How to Use the Wand; Connect the projector and your computer with a VGA cable.
52 LiteBoard™ Wand The optional LiteBoard™ Wand (p/n HW-LBWAND-02), when combined with the LiteBoard Wand dongle (p/n HW-LBRADIO), works like a wireless mouse - but one that works in midair, not on your desktop. Just hold the wand in your hand, and point it at the projected image to point, click and...
Page 54 - Using More than One Wand
53 Wand Position and Avoiding Shadows Your Location Distance from the ScreenYou can use the LiteBoard™ Wand right up against the screen, or around the room. You might find that your pointing accuracy will improve if you get closer to the screen. Also, avoid standing too far off from either side of t...
Page 55 - Wand Features; USB connection
54 Wand Features USB connection Link light Battery light Right mouse button Left mouse button Buttons and Wand TipThe wand's buttons are equivalent to the left and right buttons on a mouse. The wand's tip is also a button, and is equivalent to the left mouse button.Battery LightThe red battery light...
Page 56 - Troubleshooting LiteBoardTM; If the mouse pointer is in the wrong place on the screen, or the mouse
55 Lithium Battery InformationManufacturer: Shenzhen HYB Battery Co., Ltd.Model: J233Rating: 3.7V/800mAhCaution: Lithium battery is only rechargeable, and not user replaceable. Not user serviceable. Troubleshooting LiteBoard™ For the most up-to-date information, visit our support site at www.infocus...
Page 57 - Maintenance; Cleaning the lens; Apply a non-abrasive camera lens cleaner to a soft, dry cloth.; Using the security lock
56 Maintenance Cleaning the lens 1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • Projector must be off and the lens must be at room temperature. • Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other har...
Page 58 - Replacing the projection lamp; WARNINGS
57 Replacing the projection lamp The Lamp Hours timer in the Projector Info menu counts the number of hours the lamp has been in use.• NOTE: Be sure to use the InFocus lamp module designed for this projector. You can order new lamps from www.infocus.com (in select areas), your retailer or your deale...
Page 59 - wait 60 minutes
58 1 Turn off the projector and unplug the power cord. 2 Wait 60 minutes to allow the projector to cool thoroughly. 3 Remove the lamp door, located on top of the projector, by removing the screw on the side of the lamp door, sliding the door forward, and lifting the lamp door off. 4 Loosen the capti...
Page 60 - Numerics; Video device 11
59 Numerics 3D Sync Invert 27 A AC Power On 29AP Mode 40, 42Apply 30Aspect Ratio 26Audio 1/Audio 2 8Auto Image 26Auto Keystone 26Auto Off Time 30Auto Source 29AV Mute 28 B Battery Light 54Blank Key 28Blank Screen 28Brightness 26 C Cable box 11Ceiling Mount 26, 28Client Mode 40, 42Closed Captions 28C...
