InFocus IN5534 - Manual

6 Connector Panel The projector provides both computer and video connection options, including:• VGA computer (2) • HDMI (2) • S-video • Composite video • Component video • BNC RGBHV and YPbPr for RGBHV, EDTV and HDTV • Separate audio inputs for video and computer • USB DisplayLink connector, for co...

7 Positioning the Projector To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines:• Position the projector on a flat surface...

8 Ceiling Mount If you wish to install the projector on the ceiling:• The projector must be installed by a qualified professional in order to ensure proper operation and reduce the risk of hazards or injury. It is not recommended you install the projector yourself. • We strongly recommend using InFo...

10 Optional computer connections To get sound from the projector, connect an audio cable (optional cable, sold separately) to your computer and to the Audio 1 (used with VGA 1) or Audio 2 (used with VGA 2) connector on the projector. You can also assign your source to a different audio in connector,...

11 Displaying an image Touch the Power button on the keypad or the remote. The Power button blinks green, a beep will sound and the fans start to run. When the lamp turns on, the start up screen will display and the Power button will become solid green. It can take a minute for the image to achieve ...

12 Adjusting the image Position the projector to the desired distance from the screen at a 90 degree angle to the screen. See the Appendix for screen sizes and distances associated with the various lens options. If the image is square but not centered on the screen or viewing area, adjust Zoom or Fo...

13 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projector. You can connect the audio directly to the projector to get sound from the built-in speakers, or you can bypass the p...

14 What is Aspect Ratio? Aspect ratio is the ratio of the image width to image height. Standard TV screens and older laptops are 4:3; HDTV and most DVDs are 16:9; and widescreen computers are 16:10. If you are projecting onto a screen, the size/shape of the screen will influence the aspect ratio you...

15 Shutting down the projector Screen Save Time You can make the black screen appear after a preset number of minutes by turning on the Screen Save Time feature in the Setup menu. See page 30. Auto Off Time The projector has an Auto Off Time feature that automatically turns the projector off if no a...

Problem Solution Result No start up screen. Plug the power cord into the projector then press the power button. Startup Screen Correct image. B Startup Screen Only the start up screen appears. If your computer is using the projector's DisplayLink connector, see the DisplayLink Software User's Guide ...

17 Problem Solution Result No computer image, just the words “Signal out of range.” B Signal out of the range Press the Auto Image button on the keypad or remote. To adjust computer refresh rate, go to Control Panel > Display > Settings > Advanced > Adapter (location varies by operating ...

21 The video embedded in my PowerPoint presentation does not play on the screen B B . If your computer is using the projector's DisplayLink connector, see the DisplayLink Software User's Guide for video troubleshooting information.Turn off the internal LCD display on your laptop. Embedded video play...

23 Using the remote control The remote uses two (2) AA batteries. You can install the batteries by removing the cover from the remote’s back, aligning the + and - ends of the batteries, sliding them into place, and then replacing the cover. Caution : • When disposing of the batteries, be sure to do ...

24 Using the audio Using the projector’s speakers When the computer is using the DisplayLink or HDMI connectors, both audio and video are sent over the respective cable to the projector and audio will play from the projector's speakers. For inputs other than DisplayLink and HDMI, connect the audio s...

26 Optimizing video images After your video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 27.• Adjust the Keystone, Contrast, Brightness, Color, Tint or Sharpness in the Basic Pic...

27 Using the menus To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and down to highlight the desired menu, then press the Select button. To change a menu setting, highlight ...

30 Setup menu Language : Allows you to select a language for the onscreen display. Network: Allows you to setup network settings. See page 34 for details on network configuration and operation.• DHCP: Turns the DHCP on or off. • IP Address: Assign Network IP Address. • Subnet Mask: Assign Network Su...

33 Status and Service menu Source Info : Displays current source settings (read-only). Projector Info : Displays current projector settings (read-only). Reset Lamp Hours : Resets the lamp hours used counter in the Projector Info menu to zero. Do this only after changing the lamp. Factory Reset : Res...

34 Using Network Functions IMPORTANT: To enable network functions at all times (even when the projector is powered off), the Network item in the Always-On Functions submenu in the Setup menu must be set to Yes (not No).Projector network functions include:• Configuring and controlling the projector v...

36 Event Notifications Page (administrators only) This page lets you configure the projector to automatically send email when specific events occur. E-Mail Settings tab: In the Account Used… section, enter the information needed for your projector to connect to an email sending (SMTP) server. Then i...

38 Using LitePort LitePort displays a slide show of JPEG images stored on a USB flash drive connected to the projector. This can eliminate the need for a computer source. Image File Types LitePort displays image files in JPEG format only (file extensions .JPEG and .JPG). Other file types including P...

39 (For remaining items below, highlight the setting, then press Select one or more times to change the setting value.) Auto Start: Select On to have the player start the slide show when the USB flash drive is first connected. Select Off to have the player display thumbnails when the USB flash drive...

40 Troubleshooting LitePort • If images load slowly: Make sure you are using a newer USB 2.0- compatible (high speed) USB flash drive. Larger image file sizes may also slow down the player; to reduce file size, use an image editing program on your computer to resize images smaller; for the best bala...

41 Maintenance Cleaning the lens 1 Turn the projector off and unplug the power cord. 2 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals m...

42 Replacing the projection lamp The lamp hours timer in the Projector Info menu counts the number of hours the lamp has been in use. Twenty hours before the lamp life expires, the message “Replace lamp” appears on the screen at startup.• NOTE : Be sure to use the InFocus lamp module designed for th...

45 Replacing the lens 1 Remove the top cover by: (a) Releasing the left and right latches on both sides of the projector. (b) Sliding the top front cover in the direction of the lens. 2 Loosen the four screws then lift the lens door. (a) (a) (b)

47 Using the security lock The projector has a security lock for use with a Cable Lock System. Refer to the information that came with the lock for instructions on how to use it. Security lock

48 Appendix Projected image size NOTE : Visit the Service section of our website for interactive image size cal- culators for the standard and optional lenses. Standard Lens Features and Specifications: • Motorized Zoom and Focus • Lens Shift Position: 50-110% Vertical; +/-10% Horizontal • F-Number:...

49 Optional lenses WARNING: When replacing the lens, turn off the projector and unplug the power cord from the receptacle. Loosen the screws marked with a triangle to remove the lens. NOTE : You can order optional lenses from www.infocus.com (in select areas), your retailer or your dealer. Fixed Sho...

50 Short Throw Lens Features and Specifications (LENS-051): • Motorized Zoom and Focus • Lens Shift Position: 50-110% Vertical; +/-10% Horizontal • F-Number: 2.2-3.33 • Focal Length: 18.1-21.7 • Screen Size: 30-500 inch • Zoom Ratio: 1.20:1 • Throw Distance Ratio: 1.21-1.45: 1 (WUXGA); 1.27-1.52:1 (...

53 SplitScreen Compatibility Splitscreen allows two distinct sources to be displayed simultaneously. Switch primary sources, make picture adjustments and choose one of multiple display options: either two side by side horizontal or vertical source regions, or a small secondary source image displayed...

54 Control commands IMPORTANT: When formatting commands sent from a control system or computer, enclose commands in parentheses “(“ and “)”. When entering custom commands into Scheduled Tasks in the projector’s web interface, enclose commands in less than/ greater than symbols “<” and “>” inst...

64 INDEX Numerics 16x9 vs 4x3 14 A Aspect Ratio 14 Audio In Computer connector 10 Audio Out connector 24 C cable box 13 Computer In connector 9 Connecting external speakers 24 connecting computer 9 video device 13 Connecting a computer source 9 contacting InFocus 22 customer service contact informat...