InFocus IN5100 - Manual

6 Network Information NOTE: All screen images shown in this document are screens of a logon using an Administrator ’s ID. Any Adminis- trator-only functions will not be displayed when using a User ID. Displays the projector ’s current network configuration. Item Description DHCP Displays the DHCP co...

7 Network Setting Displays and configures network settings. NOTE: • The new configuration settings are activated after restarting the network connection. When the configuration set-tings are changed, you must restart the network connection. You can restart the network connection by clicking [Network...

8 Mail Settings Click the [Apply] button to save the settings. NOTE: • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. Item Description ...

9 Alert Settings Clicking each Alert brings up a dialog box where you can specify that an email be sent to alert the appropriate person-nel that an error has occurred. Subject can be 255 characters, Text can be 1024 characters. Item Description Lamp won’t strike Lamp won’t turn on after 5 attempts. ...

10 Schedule Settings Click the [Apply] button to save the settings. To add additional functions and events click the [Add] button and set the following items. Click the [Register] button to add new commands to the Schedule List. Click the [Delete] button to delete commands from the Schedule list. It...

12 • The Internal Clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time. Security Settings Click the [Apply] button to save the settings. NOTE: • The new configuration settings are activated after restarting the network connection. The network connection must be r...

13 Projector Control NOTE: For detail about projector control functions, see the projector’s User’s Guide. Item Description Main Basic projector commands including power on/off and changing source. Picture Picture settings including keystone, contrast, and brightness. Settings Other settings includi...

14 Projector Status Item Description Error Displays the current error status Lamp Time Displays the usage time for the current lamp. Total Lamp Hours Displays the usage time for the all lamps Filter Time Displays the usage time for the current filter. Power Status Displays the current power status. ...

15 Network Restart NOTE: Restarting requires you to re-log on to control or configure the projector. Failure and Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. NOTE: • Up to fi...

16 Subject line: Test Mail <Projector name> Text: Send Test Mail Date <Testing date> Time <Testing time> IP Address <Projector IP address> MAC Address <Projector MAC address> 3 Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] on the main ...

17 Projector management via SNMP NOTE: • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings Configure the following items via a web browser to use SNMP. Example...

18 Controlling the projector via scheduling The projector can be automatically controlled via scheduling. NOTE: • You can schedule the following control events: Power ON/OFF, Input Source. • There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific date. • The priority for scheduled e...