Page 2 - Declaration of Conformity; Trademarks; Canada; Agency Approvals
1 Declaration of Conformity Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands We declare under our sole responsibility that this projector conform to the following directives and norms: EMC ...
Page 3 - Table of Contents; Important Operating Considerations for Safety
2 Table of Contents Introduction 3Positioning the projector 5 Projector and device connector guide 6 Connecting a computer source 9 Required computer connections 9 Optional computer connections 9 Displaying an image 10 Adjusting the image 11 Connecting a video device 12 Video device connections 13 C...
Page 4 - Introduction; Product specifications
3 Introduction Your new digital projector is simple to connect, easy to use, and straightfor-ward to maintain. It is a versatile projector that is flexible enough for busi-ness presentations and home video viewing too. The IN24 has native SVGA 800x600 resolution while the IN26 has native XGA 1024x76...
Page 5 - Connector Panel; VESA computer
4 Connector Panel The projector provides both computer and video connection options, including: • VESA computer • S-video • Composite RCA audio/video The projector also provides the following connectors: • Monitor out, to provide an image on your desktop computer as well as on the projection screen ...
Page 6 - Positioning the projector; Range of distance to the screen for a given screen size
5 Positioning the projector To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guide-lines: • Position the projector on a flat surfa...
Page 7 - Projector and device connector guide
6 Projector and device connector guide The following illustration and table should help you find the connectors to use and obtain the best resolution possible from your input devices, such as computers, standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i and 720p HDTV format...
Page 8 - Standard Video Camera; S-video connection on page 13; Standard Video Game; S-video connection on page 13
7 Video Device Video Compatibility If Your Device Connector Is Attach to Adapter or Labeled Connector on Projector For Setup Instructions, see Comments Standard Broadcast TV (not HDTV) via: cable, digital cable, satellite TV, DVD, or VCR NTSC, PAL, and SECAM formats Composite video or S-video Video ...
Page 10 - Connecting a computer source; Required computer connections
9 Connecting a computer source Required computer connections Connect one end of the provided computer cable to the Computer In con- nector on the projector and the other to the VESA connector on your com-puter. If you are using a desktop computer, you will need to disconnect the monitor cable from t...
Page 11 - Displaying an image; Power
10 Displaying an image Press the Power button. The Power light on the Status Indicator Panel (page 14) blinks green and the fans start to run. When the lamp comes on, the start up screen displays and the Power light is steady green. It can take a minute for the image to achieve full brightness. ? No...
Page 12 - Adjusting the image; See page 5 for a table listing screen sizes and distances.; button to reduce the upper part of the; Keystone; button to reduce the lower part.
11 Adjusting the image If necessary, adjust the height of the projector by pressing the elevator foot release button to extend the foot. If necessary, rotate the leveling foot located at the rear of the projector. Avoid placing your hands near the hot exhaust vent at the side of the projec-tor. Posi...
Page 13 - Connecting a video device; What is Aspect Ratio?
12 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projector. There is also an audio input via the red and white A/V connec-tors. You can connect the audio directly to the projec...
Page 14 - Video device connections; Composite video connection; Video 2; VESA connection; Computer In; Component video connection; Computer in
13 Video device connections No video cables are provided with the projector. You can order cables from InFocus or provide your own. Composite video connection Plug the A/V cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yellow Video...
Page 15 - Shutting down the projector; Screen Save; To turn the projector off, press the; button on the remote or keypad; Troubleshooting your setup; Table 2: Status indicator light behavior and meaning; Status Indicator Panel icons
14 Shutting down the projector The projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen helps preserve the life of the pro-jector. The image returns when an active source is detected or a remote or keypad button is pressed. Screen Save ...
Page 17 - Signal; adjust computer refresh rate in Control
16 no computer image, just the words “Signal out of range” press the Auto Image button on keypad computer image projected Only my laptop’s background appears, not the Desktop icons Disable “Extend my Windows Desktop” in Control Panel>Display>Settings>Display 2 (location varies by operating ...
Page 20 - COLOR
19 Problem Solution Result image upside down turn off ceiling in Settings>System menu correct image image reversed left to right turn off rear in Settings>System menu correct image projected colors don’t match source adjust color, tint, color temperature, brightness, contrast, color space in t...
Page 21 - Startup
20 Problem Solution Result The video embedded in my PowerPoint presentation does not play on the screen turn off the internal LCD display on your laptop Embedded video plays correctly lamp won’t turn on, Temperature light is on make sure vents aren’t blocked, turn off the projector and allow it to c...
Page 23 - Using the remote control
22 Using the remote control The remote uses two (2) provided AA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the bat-teries, sliding them into place, and then replacing the cover. Caution : When replacing the batteries, be aware that u...
Page 24 - Using the audio; Using the projector’s speaker; Audio In; Connecting external speakers; Audio Out
23 Using the audio Using the projector’s speaker To use the projector ’s speaker, connect your source to the Audio In connec- tors ( L and/or R ) on the projector ’s composite connectors. To adjust the volume, press the Volume buttons on the keypad. Troubleshooting Audio If you aren’t hearing the au...
Page 25 - Using the keypad buttons; –resets the projector to the source.
24 Using the keypad buttons Most buttons are described in detail in other sections, but here is an over-view of their functions: Power –turns the projector on and off (page 10). Auto Image –resets the projector to the source. Presets –cycles through the available preset settings (page 29). Keystone ...
Page 28 - Using the menus
27 Using the menus To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) The Main menu appears. Use the arrow buttons to move up and down to high-light the desired submenu, then press the Select button. To change...
Page 30 - : Presets are provided that optimize the projector for displaying; Advanced menu; : adjusts the horizontal phase of a computer source.
29 Presets : Presets are provided that optimize the projector for displaying computer presentations, film images, and video images. Film input is mate-rial originally captured on a film camera, like a movie; video input is mate-rial originally captured on a video camera, like a TV show or sporting e...
Page 31 - : (video sources only) changes the clarity of the edges of a video; Color Space; : This option applies to computer and component video; Color Temperature; : allows you to individually adjust the gain (relative warmth; Video Standard; : when it is set to Auto, the projector attempts to automati-
30 Sharpness : (video sources only) changes the clarity of the edges of a video image. Select a sharpness setting. Color Space : This option applies to computer and component video sources. It allows you to select a color space that has been specifically tuned for the input signal. When Auto is sele...
Page 32 - Settings menu
31 Settings menu Audio: allows adjustments to Volume of the internal speaker and allows a chime to play when starting the projector. Volume adjustments can also be made from the projector ’s keypad. Sources: Power-up Source determines which source the projector checks first for active video during p...
Page 36 - Maintenance; Cleaning the lens; NOTE
35 Maintenance Cleaning the lens 1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2 Lightly wipe the cleaning c...
Page 38 - Using the security lock
37 Using the security lock The projector has a security lock for use with a PC Guardian Cable Lock System. Refer to the information that came with the lock for instructions on how to use it. securitylock
