InFocus 165 - Manual
InFocus 165 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; DANGER
- Page 3 – The Series 165 Automatic Transfer
- Page 4 – INSTALLATION; ELECTRICAL LINE CONNECTIONS
- Page 5 – – MANUAL OPERATION; ALL POWER OFF; – VOLTAGE CHECKS
- Page 6 – OPERATION; (light above button at the right of display); UTILITY FAILURE
- Page 7 – AUTOMATIC GENERATOR EXERCISER; TO SET EXERCISER; Note; MANUAL GENERATOR TESTING; GENERATOR TEST WITH LOAD TRANSFER
- Page 8 – TROUBLESHOOTING
Series
165
Automatic Transfer Switch
for use on Standby Systems
Cat No 165A2200F3C
Ser No 123456
200 A BOM 999999
240 V 60 Hz
381333–163 C
50 Hanover Road, Florham Park, New Jersey 07932–1591 USA
1 800 937–2726 (ASCO), for service call 1 800 800–2726 (ASCO) www.asco.com
ASCO POWER TECHNOLOGIES CANADA PO Box 1238, 17 Airport Road, Brantford, Ontario, Canada N3T 5T3
telephone 519 758–8450, fax 519 758–0876, for service call 1 888 234–2726 (ASCO) www.asco.ca
Series 165 Automatic Transfer Switches
rated 100, 200, & 230 amps, single phase, 240 V ac
Owner’s
Manual
for automatic 2–wire start generators
DANGER is used in this manual
to warn of risk of electrical shock
from high voltages capable of
causing shock, burns, or death.
WARNING is used in this
manual to warn of possible
personal injury.
!
CAUTION is used in this manual to warn
of possible equipment damage.
!
Installation should be performed by a licensed electrician
and in accordance with the National Electrical Code (NEC)
and all local electrical code requirements. Read and
understand all instructions before installing, servicing, or
operating.
Failure to do so could result in serious
personal injuries or property damage.
ASCO Series 165 Automatic Transfer Switches are Listed
under the Underwriter’s Laboratories Standard for Transfer
Switch Equipment, UL–1008. They are intended for use
only in optional standby systems in accordance with the
National Electrical Code, NEC/NFPA 70, Article 702. This
ATS is for use with 2–wire automatic start generators only.
Refer to
Application Information 381339–219
to confirm
that you have selected the appropriate product for the
intended installation.
Rating Label
Each Automatic Transfer Switch (ATS) has rating labels to
define the loads and fault current withstand/ closing ratings.
Refer to those label on the Transfer Switch for specific values.
INJURY or SWITCH DAMAGE
Do not exceed the rating label
values; it can cause personal in-
jury or serious switch damage.
!
Nameplate
The
Transfer
Switch
nameplate includes data
for each specific ASCO
Series 165 ATS. Use the
switch only within the
limits shown on this
nameplate.
A
typical
Catalog Number is also
shown below with its
elements explained:
165
A
2
200
F
3
C
control group code
3 = automatic
product
designation
poles
2 = 2 lines
ampere rating
100, 200, or 230 amps
voltage code
F = 240 V AC
Catalog number
neutral
A = solid neutral
enclosure
C = Type 1
F = Type 3R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Specifications 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Elect...
3 SPECIFICATIONS ENCLOSED AUTOMATIC TRANSFER SWITCH Enclosure Size Type 1 24” H x 14¼” W x 8” D . . . . . . . . . . . . . . . . . . (610 mm H x 362 mm W x 203 mm D) Type 3R 25” H x 14¾” W x 8½” D . . . . . . . . . . . . . . . (635 mm H x 375 mm W x 216 mm D) Weight Type 1 enclosure 67 lb . . . . . ....
4 INSTALLATION Installation of the ASCO Series 165 automatic transfer switch must be performed by a licensed electrician. It must be installed according to the National Electrical Code and all local electrical code requirements. Refer to the installation drawing and wiring diagram. MALFUNCTION or SH...
