Ikelite D90 - Manual
Ikelite D90 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – small diameter zoom clamp; Normally used with; large diameter zoom clamp; thick ribs; CClloossiinngg tthhee H
- Page 3 – Type 2 lens
- Page 4 – DIAL; Setting; ikelite; DS; ikelite; serial number
Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 45 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory to 200’ (60m).
Ikelite SLR-DC Housing
i n s t r u c t i o n
m a n u a l
#6809.1 for Nikon D90
IKELITE
2
Strobe
Mount
Rubber
Handle
Quick-Release
Strobe
Mount
Zoom
Control
Lid
Snap
Lens
Release
Sub-
Comand
Dial
Shutter
Release
Port Lock
Aluminum Tray
IKELITE
Lid
Snap
AF, Release
Buttons
On-Off
Flash +/-
Gear Sleeve
Drive Gear
Port
Opening
Meter, +/-
AE/AF Lock
Quick
Release
Button
External Strobe Connector
and Waterproof Cap
Viewfinder Port
[E] White Balance
[F] ISO
[G] Quality
[H] Main Command Dial
[I] Live View Button
[J] Multi-Selector
[K] OK
[L] Info/Quick Settings
[M] Flash Compensation
A
B
C
D
E
F
G
H
L
J
Lens
Release/
AF-M
Lid-Snap
Zoom
Bracketing
AE-AF Lock
[A] Mode Dial
[B] Delete
[C] Playback
[D] Menu
TTL
1
-1
-1
F
-2
-3
MAN
K
I
M
Lid-Snap
FRONT VIEW
BACK VIEW
3
SIDE VIEW
Camera
Tray
Camera
Mounting
Bolt
Gear
Sleeve
Port
O'ring
Port Lock
Optional
Port
Lid
Snap
Shutter
Release
AE/AF Lock
Back O’ring
Sub-command
Dial
AF, Release Buttons
Meter, +/-
Power
O
Oppeenniinngg tthhee H
Hoouussiinngg
1. Lid Snaps have a LLoocckk.
To open, push Lid Snap Lock forward and
lift as shown. Keep a firm grip on the Lid
Snap so it does not fly open quickly.
Lid Snaps may be opened one at a time.
Lift
Push Forward
Lid Snap Lock
4
IInniittiiaall CCaam
meerraa SSeettuupp
- Insert a fully charged battery
- Insert memory card (1GB or greater capacity recommended)
- Set the Mode dial to “M” manual or “A” aperture priority
- Set red-eye reduction and “FP” to OFF in the Menu Settings
- In “M” manaul mode, set shutter speed to 1/60th second or
1/125th second for fast moving subjects.
- Set aperture to F8 for general photography or F22 for macro
photography (close-ups).
- Set image resolution to highest jpeg setting or RAW
- Set ISO to 100 and Meter to “center-weighted”
IInnssttaalllliinngg tthhee CCaam
meerraa
Remove the back from
the housing. The
mounting tray for the
camera is secured to
the housing back.
Position the camera
and lens on the tray,
and then secure it with
the mounting bolt
which threads into the
camera’s tripod socket.
Use a coin or flathead
screwdriver (preferred)
to tighten the
mounting bolt so the
camera bottom is tight against the tray.
O‘ring
Mounting Bolt
Camera Tray
Nikon
D90
SSeettttiinngg tthhee CCoonnvveerrssiioonn CCiirrccuuiittrryy SSttrroobbee IID
D SSw
wiittcchh..
Inside the housing back on the
black panel, the conversion
circuitry has a switch for
setting the DS Substrobe ID.
Set the conversion circuitry
strobe ID switch located on the
black panel to the Model of DS
Substrobe being used.
• When using dual strobes
of different models such as
a DS51 and a DS125, set the
ID switch to DS51 or the lower
powered strobe.
DS
DS
125
50/51
80
160
200
ikelite
Set DS Substrobes
to TTL Mode
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5 FFllaasshh CCoonnnneeccttiioonn ffoorr EExxtteerrnnaall SSttrroobbeess When using an external strobe, connect the housing Hotshoe Connector. Slide the connector into the camera hotshoe mount from the back of the camera as shown. Slide the connector forward until it stops. This can be done after th...
11 12 IInnssttaalllliinngg tthhee PPoorrtt ccoonntt..TToo RReem moovvee PPoorrtt To remove the port, lift up on each Release Button and slide the port lock away from the port. PPoorrtt SSeeaall IInnssiiddee VViieew w If the port is installed before the camera is inserted into the housing, look on th...
14 U Ussiinngg tthhee CCoonnvveerrssiioonn CCiirrccuuiittrryy ((SSeett D DSS SSuubbssttrroobbee ttoo TTTTLL m mooddee)) •• M Mooddee aanndd CCoom mppeennssaattiioonn D Diiaall Note that the TTL compensation values are located in the yellow band. Manual compensation values are located in the black ba...