Page 2 - iiyama; please check the iiyama website.; Things to check before you call the iiyama information line; Before reporting the screen defect, please; If there is no fault found in the collected; | if the power cable is connected securely and turned on?
| Servicecard Dear user, we congratulate you on the purchase of your iiyama LCD. iiyama All iiyama LCD monitors comply with the ISO13406-2 standard for pixel defects. For details on warranty and locally used pixel policies that apply directly after installation of your product please check the iiyam...
Page 3 - ENGLISH; CE MARKING DECLARATION OF CONFORMITY; You can access the Web page of different countries from there.
ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” and 2006/95/EC “Low Voltage Directive”.The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,busines...
Page 4 - ADJUSTMENT MENU CONTENTS; TABLE OF CONTENTS; SPECIFICATIONS : ProLite E2607WS
ENGLISH FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................ 1 SPECIAL NOTES ON LCD MONITORS .......................................... 3 CUSTOMER SERVICE ....................
Page 5 - FOR YOUR SAFETY; WARNING; cause fire or electric shock.; SAFETY PRECAUTIONS
ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause...
Page 6 - shines directly on the monitor.; OTHERS
ENGLISH CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZAR...
Page 7 - SPECIAL NOTES ON LCD MONITORS; NOTE; CUSTOMER SERVICE
ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due t...
Page 8 - VGA Cable; CAUTION; CHECKING THE CONTENTS OF THE PACKAGE; CAUTION; FEATURES; NERGY
4 BEFORE YOU OPERATE THE MONITOR ENGLISH The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. * 1 The rating of the Power Cable enclosed in 120...
Page 9 - Do not give a strong impact to the monitor. It may cause damage.; HOW TO USE THE STAND; table beforehand to prevent the monitor from being scratched.
ENGLISH BEFORE YOU OPERATE THE MONITOR 5 HOW TO USE THE STAND Install the Stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock o...
Page 10 - FRONT PANEL CONTROL; Scroll Down; CONTROLS AND CONNECTORS; WSV
ENGLISH FRONT PANEL CONTROL Menu / Input Select shortcut keys ( )*1 Scroll Down / Brightness/Contrast/ A CR/ECO shortcut keys ( ) Scroll Up / OptiColor Mode ( ) *4 Select / Input select ( ) Power Indicator Blue: Normal operation Blue: Normal operation Normal operation Orange: Power Man...
Page 11 - Ensure that both the computer and the monitor are switched off.; office for a suitable adaptor.; CONNECTING YOUR MONITOR; DVI-D Cable (Accessory for ProLite E2607WS
ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then...
Page 12 - first for advice.; Careful attention is required not to catch your fingers; COMPUTER SETTING
ENGLISH Signal Timing Change to the desired signal timing listed on page 22: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista Plug �� Play P/Vista Plug �� Play The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug �� Play function runs on Windows 95/98/2000/Me/XP/Vista by conne...
Page 13 - ADJUSTING; OPERATING THE MONITOR; Turning off the power should be avoided while using the Menu.
ENGLISH OPERATING THE MONITOR 9 ADJUSTING OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adju...
Page 14 - Auto Image Adjust; Brightness; ECO
10 OPERATING THE MONITOR ENGLISH ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press Auto Image Adjust Auto Image Adjust *Only Analog input A d j u s t H . / V. P o s i t i o n , H . S i z e a n d F i n e Tu n e automatically. * For best results, use the Auto Adjust in conjunct...
Page 15 - Color Adjust; Not a
ENGLISH OPERATING THE MONITOR 11 Adjustment Item Problem / Option Button to Press Color Adjust Cool Normal Reddish white (6500K) Bluish white (9300K) Warm Gre enish white (5400K) Green Red Blue Too weakToo strong User Color Adjustment Item Problem / Option Button to Press Audio Adjust Volume Too sof...
Page 16 - To correct flickering text or lines
ENGLISH 12 OPERATING THE MONITOR Adjustment Item Problem / Option Button to Press Manual Image Adjust Horizontal Size Fine Tune H./V. Position Too far to the leftToo far to the right Too lowToo high H. Position V. Position H. Position and V. Position are switched as follows by pressing the / But...
Page 17 - 日本語; 简体中文
ENGLISH Adjustment Item Problem / Option Button to Press Setup Menu Language Select OSD Time Out OSD Position English Deutsch English German Français French Spanish H.Position OSD is too far to the leftOSD is too far to the rightOSD is too lowOSD is too high V.Position You can set the OSD display du...
Page 18 - SCREEN ADJUSTMENTS; flicker or blur for the particular computer in use.; Display the picture at the optimum resolution.; Consult the appropriate documentation for doing this.; Zebra pattern
ENGLISH SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not provide the best at res...
Page 19 - adjustment, repeat steps from
ENGLISH 1 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area. NOTE When the left side of the picture frame moves apart from the left edge of the display area during the H.Size adjustment, adjust steps 1) and 2). Another way to mak...
Page 20 - and; Put back your favorite wallpaper.
ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and because the H.Size may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H.Position after ...
Page 21 - POWER MANAGEMENT FEATURE; s than 2W
ENGLISH Even when using the power management mode, the monitor consumes electricity. Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption. NOTE It is possible that the video signal from the computer may be on while the ...
Page 22 - TROUBLE SHOOTING; Problem; The Power Cable is firmly seated in the socket.
ENGLISH 18 TROUBLE SHOOTING TROUBLE SHOOTING Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or i...
Page 23 - The Audio Cable is properly connected.; RECYCLING INFORMATION
ENGLISH Problem Check No sound. The Audio Cable is properly connected. The audio output level of the audio equipment is within the specification of the monitor. The audio equipment (computer etc.) is ON. The Volume is turned up. The Mute is OFF. The sound is too loud or too quiet. Th...
Page 24 - SPECIFICATIONS:ProLite E2607WS; APPENDIX; , Positive or Negative; PSE
20 APPENDIX * Condition: Audio equipment is not connected. NOTE ENGLISH SPECIFICATIONS:ProLite E2607WS APPENDIX LCD Panel Size Diagonal: 6 5 cm / 26" 0.2865 mm H × 0.2865mm V Response time Pixel pitch 2ms (Gray to Gray) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-80.0kHz, Vertica...
Page 26 - SPECIFICATIONS:ProLite E2607WSV
SPECIFICATIONS:ProLite E2607WSV APPENDIX LCD Panel Size Diagonal: 6 5 cm / 26" 0.2865 mm H × 0.2865mm V Response time Pixel pitch 2ms (Gray to Gray) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-80.0kHz, Vertical: 56-75 Hz Maximum Resolution 1920 × 1200 Input Connector D-Sub mini 1...
Page 27 - VGA TEXT
31.469kHz37.500kHz37.879kHz48.077kHz46.875kHz48.363kHz56.476kHz60.023kHz63.981kHz79.976kHz55.935kHz70.635kHz75.000kHz65.290kHz74.038kHz31.469kHz DIMENSIONS COMPLIANT TIMING DIMENSIONS 1440 ×900 59.940Hz75.000Hz60.317Hz72.188Hz75.000Hz60.004Hz70.069Hz75.029Hz60.020Hz75.025Hz59.887Hz74.984Hz60.000Hz60...
