ICP G9MXE0401410A1 - User Manual

A user manual for high-efficiency gas furnaces covers essential safety protocols and operational guidance. The document emphasizes critical hazards like carbon monoxide poisoning, electrical risks, and proper installation by certified professionals to prevent fires or explosions. Key topics include detailed venting requirements (direct-vent vs. non-direct-vent systems), airflow management, maintenance procedures such as filter replacement and combustion checks, and troubleshooting steps for common issues before seeking service. Safety warnings are central, stressing the need for qualified handling of gas and electrical components to ensure safe operation and longevity.

Page 1 – Safety Warnings and Installation Requirements
Page 2 – System Overview and Safety Guidelines
Page 3 – Venting System Installation and Airflow Safety
Page 4 – Furnace Startup and Pre-Operation Checks
Page 5 – Electrical and Gas Supply Procedures
Page 6 – Furnace Operation and Thermal Safety
Page 7 – Maintenance Inspection and Filter Procedures
Page 8 – Winterization Procedures
Page 9 – Troubleshooting Guide
Page 10 – Owner Notes and Maintenance Checklist

Loading the manual

Specifications subject to change without notice.

440 02 4001 07 8/9/2017

HOME OWNER’S INFORMATION

High Efficiency

Condensing Gas Furnace

Our products are designed, tested and built in accordance with DOE standardized procedures; however, actual operating

results and efficiencies may vary based on manufacturing and supplier tolerances, equipment configuration, operating

conditions and installation practices.

NOTE TO INSTALLER:

his manual must be left with the equipment user.

USER:

Please read all instructions in the manual and

retain all manuals for future reference.

WARNING

FIRE OR EXPLOSION HAZARD

Failure to follow warnings could result in personal injury,

death, or property damage.
Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS

−

Do not try to light any appliance.

−

Do not touch any electrical switch; do not use any

phone in your building.

−

Leave the building immediately.

−

Immediately call your gas supplier from a nearby

phone. Follow the gas supplier’s instructions.

−

If you cannot reach your gas supplier, call the fire

department.
Installation and service must be performed by a qualified

installer, service agency or the gas supplier.

WARNING

CARBON MONOXIDE POISONING HAZARD

Failure to follow this warning could result in personal injury

and/or death.
Carbon Monoxide is invisible, odorless, and toxic! Install a

carbon monoxide alarm in your home, even if you do not

own a gas appliance. Locate the carbon monoxide alarm in

the living area of your home and away from gas appliances

and doorways to attached garages. Follow the alarm

manufacturer’s instruction included with the alarm.

Use of the AHRI Certified TM Mark indicates a

manufacturer’s participation in the program. For

verification of certification for individual products,

go to www.ahridirectory.org .

Illustrations and photographs are only representative. Some product models may vary.

ELECTRICAL OPERATION HAZARD

Failure to follow this warning could result in personal

injury, death, or property damage.
Do not use this furnace if any part has been under

water. A flood

−

damaged furnace is extremely

dangerous. Attempts to use the furnace can result in fire

or explosion. A qualified service agency should be

contacted to inspect the furnace and to replace all gas

controls, control system parts, or electrical parts that

have been wet, or the entire furnace if deemed

necessary.

WARNING

ELECTRICAL SHOCK, FIRE OR EXPLOSION HAZARD

Failure to follow this warning exactly could result in

dangerous operation, serious injury, death or property

damage.
Improper servicing could result in dangerous operation,

serious injury, death or property damage.

Before servicing, disconnect all electrical power to furnace.

When servicing controls, label all wires prior to

disconnecting. Reconnect wires correctly.

Verify proper operation after servicing

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: ICP
Model: G9MXE0401410A1
Document type: User Manual
Language(s): English
Pages: 10
File size: 895.4 KB
Format: PDF

Summary

Page 1 - Safety Warnings and Installation Requirements

Critical safety warnings regarding gas leaks, carbon monoxide poisoning, electrical shock risks, proper installation procedures, servicing guidelines, and manual retention requirements.

Page 2 - System Overview and Safety Guidelines

Table of contents, internal component diagrams, safety considerations, proper installation by qualified personnel, and maintenance guidelines to prevent hazards.

Page 3 - Venting System Installation and Airflow Safety

Installation requirements for direct-vent and non-direct-vent venting systems, exterior vent pipe diagrams, combustion-air pipe details, warnings regarding combustible materials, and safety device procedures.