ICP EDM4X36FA1 - Installation Manual
This installation manual covers the setup and integration of TXV (thermostatic expansion valve) coils for various HVAC systems, including EDM, EDA, and EDD models. The guide emphasizes critical safety measures such as electrical shock prevention, proper refrigerant line connections, and condensate drainage systems to avoid hazards like sewer gas backflow or product damage from improper clearance or insulation. Key topics include positioning requirements for coils in different furnace/air handler configurations, airflow adjustments via static pressure testing, and compliance with refrigerant specifications (e.g., R-410A) while ensuring system compatibility with heat pumps and fossil fuel units.
Table of Contents:
- Page 1 – TXV Coil Installation Safety and Overview
- Page 2 – Collar Plate Installation and Clearance Requirements
- Page 3 – Heat Pump Coil Positioning and Adapter Installation
- Page 4 – Condensate Drain Line Installation
- Page 5 – Condensate Management and Sewer Connection Safety
- Page 6 – Refrigerant Line Connection Procedures
- Page 7 – Metering Device Setup and Airflow Adjustment
- Page 8 – Static Pressure Drop Specifications
- Page 9 – Refrigerant System Servicing Guide
These instructions must be read and understood completely before attempting installation.
It is important that the Blower and Duct System be properly sized to allow the system to operate at full capacity. Poorly
designed systems will not give satisfactory cooling or economy. They may even shorten the service life of the
compressor in the outdoor unit.
Safety Labeling and Signal Words
DANGER, WARNING, CAUTION, and
NOTE
Signal Words in Manuals
The signal words DANGER, WARNING, CAU-
The signal word WARNING is used throughout this
TION, and NOTE are used to identify levels of haz-
manual in the following manner:
ard seriousness. The signal word DANGER is only
used on product labels to signify an immediate haz-
7IN
WARN i NG
ard. The signal words WARNING, CAUTION, and
NOTE will be used on product labels and through-
The signal word CAUTION is used throughout this
out this manual and other manuals that may apply
manual in the following manner:
to the product.
DANGER - Immediate hazards which will result in
yi
CAUTION
severe personal injury or death.
WARNING - Hazards or unsafe practices which
Signal Words on Product Labeling
could result in severe personal injury or death.
Signal words are used in combination with colors
CAUTION - Hazards or unsafe practices which
and/or pictures on product labels.
may result in minor personal injury or product or
property damage.
NOTE - Used to highlight suggestions which will
result in enhanced installation, reliability, or opera-
tion.
TABLE OF CONTENTS
Installation... eee
eee 2-4
Condensate Drain
4-5
7 IN
WARN i NG
Waste Line Connection ........
0... cece eee ees 5
ELECTRICAL SHOCK HAZARD
Refrigerant Line Connections ................0
00s 6
Failure to turn off electric power could result in
Refrigerant Metering Device ......... 0.2.00 eee 7
personal injury or death.
Check and Adjust Airflow ............. 0000s 7-8
Before installing or servicing system, turn off
Start-Up Procedure ...... 00... cece eee
e eens g
| main power to the system. There may be more than
R-410A Quick Reference Guide...............0.. 9
ee
switch, including accessory heat-
484 01 3001 03
Nov 2007
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
Helpful for 4 of 4 readers
About this manual
- Brand
- ICP
- Model
- EDM4X36FA1
- Document type
- Installation Manual
- Language(s)
- English
- Pages
- 9
- File size
- 1.5 MB
- Format
Summary
Safety labeling protocols (DANGER, WARNING, CAUTION), installation prerequisites, and general warnings regarding electrical shock hazards during installation or servicing.
Instructions for installing the collar plate, positioning requirements relative to furnaces and air handlers, and minimum clearance distances to prevent property damage.
Methods for installing adapters based on coil width variations and correct positioning of heat pump coils relative to electric heat in various configurations (upflow, downflow, horizontal).