IBM UPS 3000XLV - Manual
IBM UPS 3000XLV – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Rotate and attach the display bezel.; INDEX ITEM; UPS
- Page 3 – Rear Panel Components; Option A: Embedded Network Module Configuration; Embedded Network Module CD
- Page 5 – PTION; USB C; ONNECTION VIA; PCBE S; OFTWARE; PCBE A
IBM UPS 3000XLV - IBM UPS 3000XHV
U
NINTERRUPTIBLE
P
OWER
S
UPPLY
- Q
UICK
I
NSTALLATION
G
UIDE
1: H
ARDWARE
I
NSTALLATION
Attention: Read the Safety Instructions before installing the UPS.
The UPS and battery modules are heavy. Select a location sturdy enough to handle the weight.
Installing the UPS in a Rack, Connecting the Battery and Attaching the Front Bezel
Note: Illustrations in this document might differ slightly from the hardware.
Step 1
Connect the display bezel.
Step 2
Attach the mounting brackets.
Step 3
To lighten the UPS, remove the bat-
tery module before mounting.
Step 4
Step 5
Step 6
See the Rail Installation Diagram that is
included in the Rail Kit.
Make sure the rack will not tip.
Reinstall the battery.
Connect the battery to the UPS, and
attach the front bezel.
Tower Configuration
Step 1
Connect the battery to the UPS, and
attach the front bezel.
Step 2
Remove the rail guides from the UPS.
Step 3
Connect the display bezel.
02R2718
(A)
(B)
2
1
Rear: Connect
(A)
(B)
Rear: Connect
Flat Head
8-32 x .375”
x 4
Custom Hex Head
10-32/ M6 x .5”
x 4
x 4
Philips Pan Head
10-32 x .3125”
Philips Pan Head
8-32 x .375”
x 3
2
1
Philips Pan Head
8-32 x .375”
x 3
x 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Step 4 Rotate and attach the display bezel. Step 5 Attach the top panels and mounting stabiliz-ers. Step 6 Rotate the unit to tower posi-tion. Rear Panel Components 3000XLV Model INDEX ITEM DESCRIPTION 1 & 2 Serial Port & USB Port Power management software and interface kits can be used wi...
3 2: C OMMUNICATION O PTIONS There are two different management options available: network interface or serial/USB. (See Rear Panel Components for iden- tification of ports.) These options may not be used simultaneously. Option A: Embedded Network Module Configuration The Embedded Network Module all...
5 Web interface You can use Internet Explorer 5.0 (and higher) or Netscape ® 4.0.8 (and higher) browsers to configure Embedded Network Module options, or to view the Event log. 1. Address the Embedded Network Module by its IP address or DNS name (if configured). 2. Enter the User Name and Password (...
