IBM Printing System - Manual

iii Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Agfa Corporation. Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of Internat...

1-1 1. Printer Settings (15 ppm copier) Use the numeric keys to enter the desired menu number and then press the Enterkey.Use the “ ▲ ” and “ ▼ ” keys to scroll through the menu numbers one number at a time. (Any menu number that does not have a corresponding setting item will be skippedand the next...

1-2 1. Printer Settings (15 ppm copier) ■ Operation keys <15 ppm copier - Inch version> <15 ppm copier - Metric version> Printer Key Copy quality/magnification display Enter (Manual) key Numeric keys ▼ [Zoom (-)] key ▲ [Zoom (+)] key Stop/Clear (CANCEL) key Start (GO) key Printer Key Cop...

1-4 1. Printer Settings (15 ppm copier) Menu number P31 P32 P35 P37 P40 P42 P43 P44 P45 P46 Item KPDL Error Report print out ON/OFF Sets whether an Error Report will be automaticallyprinted out whenever a KPDL error occurs. Auto emulation switching (parallel interface) Sets the back-up emulation tha...

1-5 1. Printer Settings (15 ppm copier) Menu number P47 P48 P49 P50 P51 P52 P55 P56 P61 P62 P70 Item Wide A4 ON/OFF Increases the printing area on A4 size paper. Printing orientation (parallel interface) Printing orientation (network interface) Smoothing ON/OFF Allows a printing resolution of an int...

1-6 1. Printer Settings (15 ppm copier) Menu number P71 P72 P73 P74 P75 P76 Item Receive dump mode The data that the printer receives for debuggingprograms and files is turned into hexadecimal codeand printed out. If “OK” (setting: 1) is selected here,this receive dump mode will be activated. Therec...

2-1 2. Printer Settings (20 ppm copier) 2. Printer Settings (20 ppm copier) 2-1 Procedure for making settings 1 2 3 4 Press the Printer key. The machine will switch to the printer mode. Use the “ ▲ ” and “ ▼ ” cursor keys to select “MENU” and then press the Enter key. 5 Change the desired setting.(R...

2-12 2. Printer Settings (20 ppm copier) Item No. 55 56 57 58 59 60 Item Receive dump mode The data that the printer receives fordebugging programs and files is turned intohexadecimal code and printed out. If “OK” isselected here, this receive dump mode willbe activated. The receive dump mode will b...

3-2 3.Memory Card / RAM Disk 3-3 Printer control commands It is possible to issue simple commands to the Memory Card and RAM Disk from the MS-DOS Prompt in Windows. 3-3-1 Using printer control commands A printer control command line includes “!R!” (Command operation start), as well the actual comman...

1-1 1. Procedure for Installing and Printing with a Printer Driver 1. Procedure for Installing and Printing with a Printer Driver 1-1 Included printer drivers The following printer drivers are included with this product.* Each type of printer driver has a version appropriate to a specific model of c...

1-2 1. Installing the Printer Drivers ● Windows 2000 ● Windows 95 ● Windows 98 ● Windows NT 4.0 IBM PC / AT or compatible Pentium 133 MHz or more Systemrequirements 64 MB or more 10 MB or more Pentium 133 MHz or more Recomendedrequirements 64 MB or more 10 MB or more CD-ROM drive 1 drive Parallel in...

1-3 1. Installing the Printer Drivers 1-3 Screen that Appears when the CD-ROM is Inserted This section explains the screen that appears when the CD-ROM supplied with the Printing System (K) is inserted into the CD-ROM drive. ■ Install Drivers Click to start installation of the printer driver. Follow...

1-7 1. Installing the Printer Drivers 1-5 Uninstalling the Printer Driver The following procedure explains how to uninstall the printer drivers. The uninstall program can be found on the CD-ROM that is included withthis product. Start Windows. Insert the printer driver installer CD-ROM into the CD-R...

1-8 1. Procedure for Installing and Printing with a Printer Driver ● Making the printer driver settings in Windows Click on [Start] on the Task Bar. The Star t menu will appear. Use the mouse to point to [Settings] and click on [Printers] in the correspondingsubmenu. The [Printers] folder will open....

1-9 1. Procedure for Installing and Printing with a Printer Driver ● Printing from the application Use the application that you want to use to open the document that you want to print. Select [Print] in the [File] menu. The [Print] dialogue box will appear. 6 7 Select the desired number of copies th...

2-1 2. Windows XL Driver 2. Windows XL Driver The following section explains the functions of the XL driver.* This Instruction Handbook uses illustrations from the message display of the 20 ppm copier for purposes of explanation, but the actual basic operation procedure is the same for 15ppm copiers...

2-7 2. Windows XL Driver 2-6 Device Settings Tab To access the Device Settings screen, in step 4 on page 2-1 select [Properties] from the menu and then click on the Device Settings Tab.When you have added optional equipment, make the appropriate settings for that equipment here. Once the correspondi...

3-1 3. Printer Driver for Windows 95/98 3. Printer Driver for Windows 95/98 The following procedure explains the functions of the Universal driver and the KPDL2 driver for those who use Windows 95 or Windows 98 as theiroperating system.* This Instruction Handbook uses illustrations from the message ...

3-9 3. Printer Driver for Windows 95/98 3-7 Device Options Tab (KPDL2 Driver) ■ Available printer memory (in KB) Indicates the amount of memory available for printing. As this is determined according to the amount of memory entered as the “VMOption” setting under “Installable Options”, there is norm...

3-10 3. Printer Driver for Windows 95/98 ● Staple It is possible to staple your copy sets if the optional Finisher is installed. * Stapling is only available with 20 ppm copiers.* The following settings are required before stapling is possible: (1) “Installable Options” setting in the “Device Option...

4-1 4. Printer Driver for WindowsNT 4. Printer Driver for WindowsNT 4-1 Opening the Properties Window 1 Start WindowsNT. 2 Click on [Start] on the task bar. The Start menu will appear. 3 Use the mouse to point to [Settings]. A submenu will appear, so click on [Printers]. The [Printers] folder will o...

5-1 5. Printer Driver for Windows2000 5. Printer Driver for Windows2000 5-1 Opening the Printing Preference Window 1 Start Windows2000. 2 Click on [Start] on the task bar. The Start menu will appear. 3 Use the mouse to point to [Settings].A submenu will appear, so click on [Printers]. The [Printers]...

5-5 5. Printer Driver for Windows2000 5-4-3 Document Options ■ Advanced Printing Features: Be sure to select “Enable” for this setting if you want to use the “Pages Per Sheet” (N-Up) function or the “Back to Front” option under the“Page Order” setting.

5-9 5. Printer Driver for Windows2000 In order to view this window and make settings for optional equipment, select “Properties” in step 4 on page 5-1 and then click on the “DeviceSettings” Tab.Perform the settings here whenever you add optional equipment. The functions of the optional equipment wil...

6-1 6. Printer Driver for Macintosh 6. Printer Driver for Macintosh When using unit as a network printer, it is possible to print PostScript files from a Macintosh Computer. This section contains explanations regardingthe procedure to install the Macintosh PPD files and select this printer, as well ...

6-4 6. Printer Driver for Macintosh 6-3 General Dialog Box *The actual layout of each dialog box and the available option and settings may differ somewhat depending upon the application and version ofLaserWriter that you are using. ■ Printer:Selects the desktop printer to be used for printing your d...

6-5 6. Printer Driver for Macintosh 6-4 Layout Dialog Box ■ Pages per sheet:Sets the number of pages to be printed on each sheet of paper. ■ Layout Direction:A button of either is clicked, and a layout direction is decided. If right button is selected, the pages are laid out from right to left. ■ Bo...

6-6 6. Printer Driver for Macintosh 6-5 Printer Specific Options ■ Resolution:Specifies the printing resolution (number of dots per inch) to be used when printing. Select between “600 dpi” and “300 dpi”. The factorydefault setting is “600 dpi”. ■ Management Code:This setting is used when Copy Manage...

6-8 6. Printer Driver for Macintosh 6-6 Page Setup dialog Dialog Box Settings for paper size, page layout, magnification ratio and print direction (orientation) are performed in the Page Setup dialog box. To display thePage Setup dialog box, select Page Setup… in the File menu of the corresponding a...

6-9 6. Printer Driver for Macintosh 6-7 PostScript Dialog Box The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application and the version ofLaserWriter that you are using. ■ Visual Effects:Visual effects such as horizontal and vertic...

6-10 6. Printer Driver for Macintosh 6-8 Custom paper sizes Dialog Box When a paper sizes is selected in “Custom paper sizes” Dialog Box , the paper size can be set as desired.* The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the applica...