Page 3 - IBM Infoprint M22 MFP Option; Setup Guide; IBM
IBM Infoprint M22 MFP Option Setup Guide S510-2633-00 IBM
Page 7 - Using this book
1 Get started Step 1: Get started Using this book This book helps you set up your printer and scanner (MFP option). If you do not have an option listed here, you can skip that portion of the setup guide and continue to the next task. If you need more information to assemble an option or your printer...
Page 20 - Removing the shield
14 Assemble paper handling options Installing printer memory and network options 1 Press the release latches to open the upper and lower front doors. 2 Press down on the side door latches and open the side door. Removing the shield 1 Loosen, but do not remove, the six screws on the shield. 2 Lift th...
Page 23 - Step 3: Set up the printer
17 Set up the printer Step 3: Set up the printer Removing the print cartridgepackaging 1 Open the printer upper front door. 2 Pull the print cartridge up and out. 3 Remove the tabs and packaging from the cartridge. 4 Reinsert the print cartridge into the printer. The print cartridge will drop down a...
Page 27 - Verifying the IP settings
Verifying the IP settings Note: On Windows computers, click Start Programs Command prompt (or AccessoriesCommand prompt if using Windows 2000). Attaching the scanner shelf 3 Press Menu until you see Std Net Setup (or Network 1 Setup or Network 2 Setup), and then press Select . 4 Press Menu until you...
Page 29 - Step 4: Install the scanner
23 Install the scanner Step 4: Install the scanner 1 Open the scanner box and then remove all items from the boxexcept the scanner. 2 Make sure you have the following items: 3 Place all items except the scanner aside for later use. 4 Remove the scanner from the box and place it on a flat, levelsurfa...
Page 37 - Using MarkVision
Using yourbrowser Note: Many of these settings depend on the printer, options, and scanner combination you have. 1 Type the IP address of the MFP in the URL field of yourbrowser (for example, http://192.168.236.24), and then press Enter . 2 Click Configuration . 3 Select Copy Setup from the MFP menu...
Page 43 - Configure default scan job settings
Step 10: Set up network scanning Note: The control panel will not display a Scan to...menu item unless the menuitem has been configured. PerformingScan to NetworkGeneral Setup Note: After you create a list of permanent destinations, it becomes available in the MFP control panel; these default settin...
Page 44 - Specify SMTP gateway and other E-mail settings
Performing Scan to E-mail General Setup Note: You may want to use the network administrator’saddress as the defaultaddress. When an e-mail cannot be sent, notification is returned to this address. Creatingpermanent e-mail destinations Note: Before you create a destination, check the list at the bott...
Page 46 - Step 11: Verify MFP setup; Making a test copy; Sending a test fax; Testing scan to
Step 11: Verify MFP setup Making a test copy Copy mode is the default setting of the control panel. 1 Make sure the Ready message is displayed. 2 Place your original document in the scanner. 3 Press Go/Send to send a copy to your printer. Sending a test fax Send a one page test fax to someone and as...
Page 47 - Limiting MFP use
Step 12: Distribute MFP user instructions Finding user instructions Distributing user information Limiting MFP use MFP online documentation includes helpful instructions for making copies, sending faxes, and scanning documents to e-mail, FTP destinations, or back to your computer. To view the availa...
Page 48 - Solve setup problems; Getting more help
Solve setup problems Problem Solution Ready message not displayed The control panel and the printer are not talking to each other, or the printer or scanner may be turned off. 1 Turn the printer off, and then back on. 2 Turn the printer and scanner off. Make sure all cables and cords are connected, ...
Page 49 - Maintain your scanner; Clearing a paper; jam
Maintain your scanner Clearing a paper 1 Open the automatic document feeder. jam 2 Carefully pull out the jammed paper. 3 Close the automatic document feeder. Maintain your scanner 43
Page 52 - Moving the; scanner; Replacing the pad
Moving the If you need to transport the scanner, follow these instructions to scanner relock the scanner: Warning: Failure to lock the scan mechanism beforemoving the unit can cause internal damage. 1 Raise the scanner high enough to move the switch down to the locked position. Replacing the pad If ...
Page 54 - Electronic emission notices; Telecommunications notices
Notices The following notices apply to machine type 4036-302. The following telecommunications notices apply to those machines in which the print server is installed. Electronic emission notices Warning: This is a Class A product. In a domestic environment, this product may cause radiointerference, ...
Page 59 - Readers’ Comments — We’d Like to Hear from You
Readers’ Comments — We’d Like to Hear from You IBM Infoprint M22 MFP OptionSetup Guide Publication No. S510-2633-00 Overall, how satisfied are you with the information in this book? Very Satisfied Satisfied Neutral Dissatisfied Very Dissatisfied Overall satisfaction h h h h h How satisfied are you t...
Page 60 - IBMR; BUSINESS REPLY MAIL
Readers’ Comments — We’d Like to Hear from You S510-2633-00 S510-2633-00 IBMR Cut or FoldAlong Line Cut or FoldAlong Line Fold and Tape Please do not staple Fold and Tape Fold and Tape Please do not staple Fold and Tape NO POSTAGENECESSARYIF MAILED IN THEUNITED STATES BUSINESS REPLY MAIL FIRST-CLASS...