Page 2 - All trademarks are the property of their respective holders.
LE-565 User’s Manual 2 Copyright Copyright 2006. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protecte...
Page 3 - LE-565 User’s Manual; Packing List; Please check the package before you starting setup the system; User’s Manual x 1
LE-565 User’s Manual 3 Packing List Please check the package before you starting setup the system Hardware: LE-565 series motherboard x 1 Cable Kit: Serial ATA Ribbon Cable x 2 44-pin ATA33 IDE Cable x 1 26-pin Slim Type Floppy Cable x 1 Printed Matters: User’s Manual x 1 Driver CD x 1 COM Port Cabl...
Page 4 - Index; Chapter 2; Digital Display
LE-565 User’s Manual 4 Index Chapter 1 <Introduction> ..................................................................................... 7 1.1 <Product Overview>................................................................................. 7 1.2 <Product Specification> .........
Page 5 - Power Output
LE-565 User’s Manual 5 2.15.1 <Power Input> .......................................................................... 33 2.15.2 < Power Output >… …………………………………………………. 34 2.15.3 <Fan Connector>...................................................................... 34 2.16 <Indica...
Page 7 - with RAID to provide the economical embedded platform.; Multimedia solution; dual independent display with CRT.; Four LAN Interface; Expanded; is a feature for monitoring POST
LE-565 User’s Manual Introduction Product Overview 7 Chapter 1 <Introduction> 1.1 <Product Overview> LE-565 is the 5.25 inch embedded miniboard based on VIA chipset. It integrates VIA embedded chipset for CN700 with VT8237R Plus, DDR 333/400 SDRAM, and serial ATA with RAID to provide the...
Page 8 - General Specification; VGA Display Interface
LE-565 User’s Manual Introduction Product Specification 8 1.2 <Product Specification> General Specification Form Factor 5.25 inch miniboard CPU VIA V4/Eden 1.0GHz processor L1/L2 Cache: 128/128KB Front side bus: 400MHz Memory 1 x 184-pin DDR 333/400 SDRAM up to 1GB,onboard optional 256MB DDR S...
Page 13 - DC_IN LAN1/2/3/4 COM1 USB CRT
LE-565 User’s Manual Hardware Setup Connector Location 13 DC_IN LAN1/2/3/4 COM1 USB CRT CF
Page 14 - CMOS Operating/Clear Setting; JCFSEL
LE-565 User’s Manual Hardware Setup Jumper Reference 14 2.2 <Jumper Reference> Jumper Function JRTC CMOS Operating/Clear Setting JCFSEL Compact Flash address mode setting JVLCD LCD Panel Voltage Setting JAT AT/ATX mode setting JCSEL1/2 COM2 RS232/422/485 mode setting JCFSEL JVLCD JRTC JAT JCSE...
Page 16 - Please check the pin number to match the socket side well
LE-565 User’s Manual Hardware Setup CPU and Memory Setup 16 2.4 <CPU and Memory Setup> 2.4.1< CPU> The board supports VIA Eden processor, default ratio is Eden 1G (400MHz) with heatsink only. 2.4.2 <Memory> The board supports one 184-pin DDR333/400 SDRAM and up to 1GB of capacity, ...
Page 17 - CMOS; JAT; mode; JRTC
LE-565 User’s Manual Hardware Setup CMOS ATX Setup 17 2.5 <CMOS ATX Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values. Jumper: JRTC Type: Onboard 3-pin ...
Page 18 - supported for disk on module.; slave/Master mode on secondary IDE channel.; Slave
LE-565 User’s Manual Hardware Setup Enhanced IDE&CF Interface 18 2.6 <Enhanced IDE & CF Interface> The board supports two enhanced IDE interface, dual channel for 4 ATAPI devices with ATA33. Based on embedded application, the board has one 44-pin IDE connector +5V supported for disk on...
Page 19 - Complies with Serial ATA Specification Revision 1.0
LE-565 User’s Manual Hardware Setup Serial ATA Interface 19 2.7 <Serial ATA Interface> Based on VIA VT8237R Plus Southbridge, the board supports two Serial ATA interfaces with RAID 0 and 1 array function. The following is the list of the specification of the Serial ATA. 1. Complies with Serial...
Page 20 - package to connect the floppy device.
LE-565 User’s Manual Hardware Setup Floppy Port 20 2.8 <Floppy Port> The board provides a slim type floppy port; please use the 26-pin ribbon cable in the package to connect the floppy device. FDD 4. Lift up this plastic bar 5. Slot the cable in (Blue paste for outside) 6. Press back the plast...
Page 22 - LE-565 User’s Manual Hardware Setup; Onboard Display Interface; The board provides a DB15 CRT connector on the rear I/O panel.; CRT
LE-565 User’s Manual Hardware Setup Onboard Display Interface 22 2.10 <Onboard Display Interface> Based on VIA CN700, the board supports integrated S3 Graphics UniChrome Pro IGP graphics, with BIOS selectable 16/32/64MB shared with system memory for frame buffer. 2.10.1 <Analog VGA Interfac...
Page 23 - and one jumper for panel voltage setting; JVLCD
LS-570 User’s Manual Hardware Setup Digital Display 23 2.10.2 <Digital Display> The board provides one 40-pin LVDS connector for 18/24-bit single/dual channel panels, supports up to 1600 x 1200 (UXGA) of resolution, with one LCD backlight inverter connector and one jumper for panel voltage set...
Page 24 - LCDVCC
LE-565 User’s Manual Hardware Setup Digital Display 24 Connector: CN_INV Connector: JVLCD Type: 5-pin LVDS Power Header Type: 3-pin Power select Header Connector model: JST B5B-XH-A Pin Description Pin Description 1 +12V 1 VCC(5V) 2 GND 2 LCDVCC 3 GND 3 VCC3(3.3) 4 GND 5 ENABKL Connector: CN_LVDS Ty...
Page 25 - local cable manufacture to make cables.; LCD Installation Guide:; the; LCD panel; and the; backlight inverter; jumper; For sample illustrator only
LS-570 User’s Manual Hardware Setup Digital Display 25 To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight power. 3. A LCD cable and an inverter cable. For the cables, please follow the pin assignment of the connector to make a cable,...
Page 26 - The panel type mapping is list below:; LE-565 BIOS panel type selection form; Resolution
LE-565 User’s Manual Hardware Setup Digital Display 26 After setup the devices well, you need to select the LCD panel type in the BIOS. The panel type mapping is list below: LE-565 BIOS panel type selection form VGA ROM VERSION: 9Y-9X-00-20 NO. Resolution Color Channel 0 640 x 480 18 1 1 800 x 600 1...
Page 27 - CDIN
LS-570 User’s Manual Hardware Setup Onboard Audio Interface 27 2.11 <Onboard Audio Interface> The board provides the onboard AC97 5.1-channel audio interface with Realteck ALC655. Connector: CN_AUDIO Type: 10-pin (2 x 5) header (pitch = 2.54mm) Pin Description Pin Description 1 Line/SURR – Lef...
Page 28 - provides up to 480Mbps of transferring rate.; Interface; Controller VIA; USB
LE-565 User’s Manual Hardware Setup USB2.0 Interface 28 2.12 <USB2.0 Interface> Based on VIA VT8237R Plus, the board provides 6 USB2.0 ports. The USB2.0 interface provides up to 480Mbps of transferring rate. Interface USB2.0 Controller VIA VT8237R+ Transfer Rate Up to 480Mb/s Output Voltage 50...
Page 29 - Ground
LS-570 User’s Manual Hardware Setup USB2.0 Interface 29 Connector: CN_USB Type: 10-pin (5 x 2) header for USB2/3 Ports Pin Description Pin Description 1 VCC 2 VCC 3 Data0- 4 Data1- 5 Data0+ 6 Data1+ 7 Ground 8 Ground 9 Ground 10 N/C PS: The USB2.0 will be only active when you connecting with the USB...
Page 30 - purpose I/O port for system control like POS or KIOSK.; Pin; Ground
LE-565 User’s Manual Hardware Setup GPIO Interface 30 2.13 <GPIO Interface> The board provides a programmable 8-bit digital I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN_DIO Type: onboard 2 x 6-pin header, pitch=2.0mm Pin Descripti...
Page 32 - COM
LE-565 User’s Manual Hardware Setup GPIO Interface 32 CN_COM2/3/4 10 1 COM JCSEL2 JCSEL1
Page 33 - them to meet your plication.; Ground; CPUFAN
LS-570 User’s Manual Hardware Setup Power and Fan Connector 33 2.15 <Power and Fan Connector> The board comes with a 2-pin DC-Jack power connector for DC 12V input, it also has one 4-pin P4 additional use power connector for internal power supply, you can choose one pf them to meet your plicat...
Page 34 - Floppy
LE-565 User’s Manual Hardware Setup Power Output 34 2.15.2 <Power Output> Connector: CN_PWR Type: 4-pin P-type connector for +5V/+12V output Pin Description Pin Description Pin Description Pin Description 1 +5V 2 Ground 3 Ground 4 +12V Note: Maximum output voltage: 12V/5A & 5V/3A 2.15.3 &l...
Page 35 - The; JFRNT; Function
LS-570 User’s Manual Hardware Setup Indicator and Switch 35 2.16 <Indicator and Switch> The JFRNT provides front control panel of the board, such as power button, reset and beeper, etc. Please check well before you connecting the cables on the chassis. Connector: JFRNT Type: onboard 14-pin (2 ...
Page 37 - : Two hard drives operating as one drive for optimized data R/W
LE-565 User’s Manual System Configuration SATA RAID Configuration 37 Chapter 3 <System Configuration> 3.1 <SATA RAID Configuration> The board supports two Serial ATA ports onboard, and supports RAID 0, 1 and JBOD disk array, the RAID 0, 1 and JBOD are specified below: RAID 0 (Stripping) ...
Page 38 - (To getting start, please click here to learn more information)
LE-565 User’s Manual SATA RAID Configuration 38 You also can edit disk array under OS, please install the VIA RAID Utility in the driver CD. (To getting start, please click here to learn more information) (Click here to build RAID 0) (Click here to build RAID JBOD) (Click here to build RAID 0)
Page 40 - For secondary display device, you have two options selectable.
LE-565 User’s Manual Display Configuration 40 3.3 <Display Configuration> The board provides onboard analog VGA interface, and optional digital display interface with LVDS , please install the VIA video driver before enjoy the vivid display. Based on the VIA CN700 with S3 UniChrome Pro graphic...
Page 41 - Two controllers for each display device
LE-565 User’s Manual System Configuration Display Configuration 41 Two controllers for each display device There are two options for secondary display device For more display properties setting, please click “Advanced” button.
Page 42 - Please select S3Display for advanced device setting.; Connected Devices
LE-565 User’s Manual Display Configuration 42 Please select S3Display for advanced device setting. When you set dual display clone mode, you’ll see the same screen display on two devices. When you set the dual display for extended desktop mode, you can have the independent desktop on the second devi...
Page 44 - LE-565 User’s Manual BIOS Setup
LE-565 User’s Manual BIOS Setup 44 Chapter 4 <BIOS Setup> The motherboard uses the Award BIOS for the system configuration. The Award BIOS in the single board computer is a customized version of the industrial standard BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatib...
Page 46 - Reset
LE-565 User’s Manual I/O Port Pin Assignment IDE Port 46 Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: IDE1 Type: 40-pin (20 x 2) box header Pin Description Pin Description 1 Reset 2 Ground 3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 D11 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14...
Page 50 - Link
LE-565 User’s Manual 50 A.7 <LAN Port> Connector: RJ45_1/2/3/4 Type: RJ45 connector with LED on rear panel Pin 1 2 3 4 5 6 7 8 Description TX+ TX- RX+ N/C N/C RX- N/C N/C Connector: JLED0/1/2/3 Type: 6-pin header for LAN LED Pin Description Pin Description 1 ACT+ 2 ACT- 3 Link100+ 4 Link100- 5...
Page 52 - B.1 BIOS Auto Flash Tool; Method
LE-565 User’s Manual Flash BIOS BIOS Auto Flash Tool 52 Appendix B <Flash BIOS> B.1 BIOS Auto Flash Tool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below: TU http://www.award.com UT TU http://www.comme...
Page 54 - Contact Information; Any advice or comment about our products and service, or; Taiwan Commate Computer Inc.; Commell is our trademark of industrial PC division
LE-565 User’s Manual Contact Information Contact Information 54 Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business. Taiwan Commate ...
