Page 2 - Table of Contents
2 Table of Contents SAFETY AND REGULATORY INFORMATION ....................................................................3 W arning ..............................................................................................................................3 FCC Notice ...............................
Page 3 - Safety and Regulatory Information; Warning
3 Safety and Regulatory Information Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the unit. Do not disassemble the unit. Refer servicing to qualified personnel only. This equipment is not intended for use in critical...
Page 4 - Control Panel Buttons and Indicators
4 Control Panel Buttons and Indicators Control Panel Button Mode Description OSD Menu Always Opens the On-Screen Display (OSD) menu. Also used to exit the OSD menu or to return to the pre-vious menu. W hen the OSD Menu is NOT Displayed Performs a custom function selected by the user. To configure th...
Page 6 - On Screen Display Functions; Picture
6 On Screen Display Functions Picture Menu Description Brightness Adjusts the brightness. Direct Access Feature : W hen OSD is not on the screen, push the button to adjust the brightness. Contrast Adjusts the contrast. MagicBright Provides an optimum viewing environment depending on the contents of ...
Page 7 - Color
7 Color Menu Description MagicColor Improves digital image and displays natural color more clearly without disturbing the image quality. There are four modes available: 1) Off: Disables the MagicColor feature 2) Demo: Displays a split screen—on the right is the screen before applying MagicColor and ...
Page 8 - Image
8 Image Menu Description Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Hori-zontal Control menu. Fine Removes noise such as horizontal stripes. If the noise persists after fine tuning, repeat it after adju...
Page 9 - Setup; Information
9 Setup Menu Description Reset Returns settings to factory defaults. Customized Key Allows you to specify a function to activate when the Customized Key is pressed. Select from one of three function options: • MagicBright • MagicColor • Color Effect Off Timer Allows you to set a time for the monitor...
Page 10 - Installation Instructions; Preparing for Installation
10 Installation Instructions Preparing for Installation Important! Perform the following steps BEFORE Installation of the monitor into the panel. 1. Ensure that sufficient power is available. 2. Ensure that sufficient space is available to allow for proper air flow into and out of the unit. 3. Ensur...
Page 11 - Installation into Rack
11 Installation into Rack Hope Industrial Systems’ Rack Mount Monitors conform to Electronic Industries Association standard EIA-310-D. Our monitors will fit in type A, B, or C rack with a width of 19” (482.6 mm) (preferred EIA rack width). The HIS-RL17 has a panel height of 8U.
Page 12 - Touchscreen Driver Installation
12 Touchscreen Driver Installation The enclosed CD-ROM contains documentation and drivers for all major operating systems (touchscreen models only). To be sure you have the most current information, check the fol-lowing Internet address: http://HISmonitors.com/Touchscreen_Drivers.htm
Page 13 - Setting the Timing Mode
13 Setting the Timing Mode Setting the timing mode of your computer graphics adapter (or other video source) is impor-tant for maximizing the quality of the screen image and for minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical freq...
Page 14 - Cleaning; Resistive Touchscreen Model
14 Cleaning CAUTION! DO NOT USE ABRASIVE MATERIALS SUCH AS PAPER TOWELS OR DIRTY SHOP RAGS ON THE DISPLAY AS IT WILL SCRATCH THE PROTECTIVE COATING. ALWAYS USE A SOFT CLOTH, PREFERABLY MADE OF COTTON. Resistive Touchscreen Model Any standard glass cleaner can be used to clean the touchscreen. Always...
Page 15 - Troubleshooting
15 Troubleshooting Symptom Check List Solutions Do you see the “Check Signal Cable” message on screen? Check the video connection from the monitor to the computer. If running W indows and the computer power is on, reboot the computer and watch for the initial boot and windows screen. If you see the ...
Page 17 - Drawings; Front and Side Views
Page 18 - Rear and Bottom Views
Page 19 - Specifications; Display
19 Specifications Display Type Thin-film transistor (TFT) Active Matrix Liquid Crystal Size 17” (43 cm) diagonal Image Size 13.3” (338 mm) x 10.6” (270 mm) Native Resolution SXGA (1280 x 1024, 5:4 aspect ratio) Plug and Play VESA DDC 2B Minimum Resolution 640 x 350 Pixel Pitch 0.264 mm x 0.264 mm Nu...
Page 22 - Factory Preset Timing
22 Factory Preset Timing Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 ...
Page 23 - Warranty Statement
23 Warranty Statement Who is Covered? This warranty covers the purchaser of this product only and is not transferable without our written con-sent. What Does This Warranty Cover and What is the Period of Coverage? The warranty remains in force for a three year period beginning on the date we invoice...
