IBM 92P1836 - Manual
IBM 92P1836 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Plastic to plastic; Logic card to plastic
- Page 3 – Removing and replacing a FRU; DANGER
- Page 4 – 010 ThinkPad Dock PCI cover
- Page 5 – Note: The following illustration shows how to remove the
- Page 6 – 020 ThinkPad Dock top cover; Note
- Page 10 – 010 ThinkPad Dock II PCI cover
- Page 11 – 020 ThinkPad Dock II top cover
- Page 14 – Parts list; Optional FRUs
Part Number: 92P1836
Important
This publication contains product-specific parts
information for IBM ThinkPad Dock, ThinkPad Dock
II, ThinkPad Port Replicator, ThinkPad Mini Dock,
and ThinkPad Port Replicator II products.
This publication is intended for trained service
personnel who are familiar with ThinkPad products.
Before servicing an IBM ThinkPad products, be sure
to review the safety information on the hardware
maintenance manual of the ThinkPad computer.
FRU replacement notices
This section contains notices related to removing and
replacing parts. Read this section carefully before replacing
any FRU.
Screw notices
Loose screws can cause a reliability problem. In IBM
ThinkPad computer, this problem is addressed with special
nylon-coated screws that have the following characteristics:
v
They maintain tight connections.
v
They do not easily come loose, even with shock or
vibration.
v
They are harder to tighten.
v
They should be used only once.
Do the following when you service this machine:
v
Keep the screw kit (for the P/N, see “Parts list” on
page 14) in your tool bag.
v
Always use new screws.
v
Use a torque screwdriver if you have one.
© Copyright IBM Corp. 2003
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tighten screws as follows: v Plastic to plastic Turn an additional 90 degrees after the screw headtouches the surface of the plastic part: 90 degrees more (Cross-section) v Logic card to plastic Turn an additional 180 degrees after the screw headtouches the surface of the logic card: 180 degrees mor...
Removing and replacing a FRU This section presents directions and drawings for use inremoving and replacing a FRU. Be sure to observe thefollowing general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runsthe risk of damaging parts. 2. B...
1010 ThinkPad Dock PCI cover Before replacing the PCI cover:There are two types of ThinkPad Dock, as follows: v ThinkPad Dock: FRU no. 08N1546 (PCI cover: FRU no.05K6246) v ThinkPad Dock with extension plate: FRU no. 08N1537(PCI cover: FRU no. 08N7317) Confirm the FRU no. of the ThinkPad Dock first ...
