Page 3 - Introduction
Introduction This manual provides an overview, installation instructions, operating guidelines, instructions on how to replace the keys, and general maintenance information for the IBM™ 4685-K03 POS Keyboard. In this manual, the IBM 4685-K03 POS Keyboard may be referred to as the 4685-K03 or as the ...
Page 4 - Korean Communications Statement; part being installed are at the same charge level.; ESD Damage Prevention
_________________________________________________________________ Notices _________________________________________________________________________________________ Electronic Emission Notices Japanese Voluntary Control Council for Interference (VCCI) Statement This product is Class A Information Tec...
Page 5 - Handling Removed Cards; For related information, please see the following websites:
Handling Removed Cards Logic cards removed from a product should be placed in ESD protective containers. No other object should be allowed inside the ESD container with the logic card. Attach tags or reports that must accompany the card to the outside of the container . _____________________________...
Page 7 - Safety Information for Users
Safety Information for Users Safety Instructions vii
Page 8 - Safety Information for service personnel; skills to perform a PC upgrade.; Safety Information for Japan
Safety Information for service personnel Before you begin to install or service this product, please read the following safety information. Note: In these notices, the term, qualified service personnel, refers to a person with the skills to perform a PC upgrade. _____________________________________...
Page 10 - Safety Information for Korea
_________________________________________________________________________________________ Safety Information for Korea x IBM 4685-K03 Installation, Operation and Maintenance Guide
Page 13 - Contents
Contents INTRODUCTION ..................................................................................................................................................................... III WHO SHOULD USE THIS GUIDE .....................................................................................
Page 15 - Chapter 1 “An overview of the IBM 4685-K03 POS Keyboard”; An overview
Chapter 1 “An overview of the IBM 4685-K03 POS Keyboard” This chapter provides an overview of the IBM 4685-K03 POS Keyboard, explains how to confirm the identification of the product, gives the names of the parts, and describes the key layout at time of shipment. ____________________________________...
Page 16 - Confirmation of product; Confirm the following parts are included.
_________________________________________________________________________________________ Confirmation of product Confirm the following parts are included. 4685-K03 Model □ 4685-K03 Keyboard □ Keys 1 set (Single keys: 54 pieces Double keys: 4 pieces) □ Mode keys Label 1 □ Mode keys Operator Key (“OP...
Page 18 - Parts name; Mode switch
_________________________________________________________________________________________ Parts name 4685-K03 model Mode switch MSR System keys S1 S2 2 IBM 4685-K03 Installation, Operation and Maintenance Guide
Page 19 - Key layout at shipment time
_________________________________________________________________________________________ Key layout at shipment time 4685-K03 model Chapter 1 Outline for IBM 4685-K02 POS Keyboard 3
Page 21 - Chapter 2 “Installing the keyboard”; Installation for IBM 4800 POS terminal; Connect the keyboard cable 5 to the keyboard.; Connector; about how to install the video display.)
Chapter 2 “Installing the keyboard” This section explains how the Keyboard is installed on the IBM 4800 POS terminal. _________________________________________________________________________________________ Installation for IBM 4800 POS terminal This section explains how Keyboard is installed on th...
Page 22 - Put the keyboard in place on the system device.
With the video display Without the video display 3. Put the keyboard in place on the system device. 6 IBM 4685-K03 Installation, Operation and Maintenance Guide
Page 25 - Chapter 3 “Operating the keyboard”; store or call your system representatives.; System keys; Volume adjustment
Chapter 3 “Operating the keyboard” This chapter explains the operating procedures and the functions of the parts. _________________________________________________________________________________________ System keys The system keys are used to input system functions, which are run under the control ...
Page 26 - should be set when installing the keyboard on the system device.
10 IBM 4685-K03 Installation, Operation and Maintenance Guide Notes: 1. Use your fingers, not a tool, when adjusting the speaker volume. 2. The volume adjustment control is on the bottom of the keyboard. The speaker volume should be set when installing the keyboard on the system device.
Page 27 - Inactive
_________________________________________________________________________________________ Mode switch The key-controlled mode switch is used to select the operating mode of the 4685-K03. The mode switch has four positions that are selected with mode keys. Both the operator key and manager key will c...
Page 28 - How to swipe a card through the MSR; toward the operator with a smooth, steady motion.; Back side; Daily care
________________________________________________________________________________________ How to swipe a card through the MSR This section explains how to swipe a card through the MSR (magnetic stripe reader). 1. Hold the card horizontally with the stripe at the bottom and facing away from the keyboa...
Page 31 - Chapter 4 “Replacing the keys”; Replacing a single key; Spring
Chapter 4 “Replacing the keys” You are free to change the layout of the keys except for the ten keys of the numeric keypad. For example, frequently used keys can be made into larger double keys by replacing two single keys with one double key. This chapter explains how to replace single keys, double...
Page 32 - Attaching; Insert the black rubber ring. Insert the cup with the; Key
3. Remove the black rubber ring. Rubber ring (Black) Attaching 1. Insert the black rubber ring. Insert the cup with the larger opening facing up. 2. Insert the key. Be careful not to bend the spring attached to the key. 3. Attach the key. Rubber ring (Black) Key Spring 16 IBM 4685-K03 Installation, ...
Page 33 - Pinch the key lightly with the removal tool, and; Removal tool
_________________________________________________________________________________________ Replacing a double key Removal 1. Pull off the key cap with the removal tool. (See “Replacing a single key” on page 17.) 2. Pinch the key lightly with the removal tool, and pull it out. Be careful not to bend t...
Page 34 - Key guide
Attaching 1. Insert the key guide into the hole that will not use a scan code. 2. Insert the brown rubber ring around the hole where the key guide was inserted. Insert the black rubber ring at the location without the key guide. 3. Insert the key. Be careful not to bend the springs attached to the k...
Page 35 - Make sure the smaller keys, the rubber rings,; Key guides
_________________________________________________________________________________________ Replacing a quadruple key Removal The removal procedure for quadruple keys is the same as for single or double keys. 1. Pull off the key cap with the removal tool. 2. Pull off the key with the removal tool. Be ...
Page 37 - Chapter 5 “Maintenance of the keyboard”; Be sure to read “Safety instructions” on page; Symptom Causes; The key cap, the top cover assembly or the control card has troubles.
Chapter 5 “Maintenance of the keyboard” This section is provided for the maintainer of the IBM 4685-K03 POS keyboard. Be sure to read “Safety instructions” on page ⅴ and “Safety inspection guide” on page ⅶ before working on this product. ______________________________________________________________...
Page 38 - The keyboard has problems or the OS settings are incorrect.; Diagnostic tests; tests; Self-diagnostic tests; How to enter the self-diagnostic tests
22 IBM 4685-K03 Installation, Operation and Maintenance Guide Symptom Causes and actions The MSR is unable to read cards. Cause 1 Action 1 Cause 2 Action 2 Action 3 There MSR reading head needs to be cleaned. Clean the MSR reading head by using the MSR cleaning card in the hardware service kit (P/N:...
Page 39 - Note; in one of the other positions.; How to terminate the self-diagnostic tests
Chapter 5 Maintenance of the keyboard 23 Mode switch test (Self-diagnostic test) Switching the mode key switch to a new position should cause the speaker to beep once. MSR Test (Self-diagnostic test) If a magnetic card is scanned through the MSR, the speaker should beep twice. Key Input Test (Self-d...
Page 40 - . Remove the rear cover
_________________________________________________________________________________________ Removing and replacing parts Replacing the rear cover 1. Remove the 7 screws labeled 1 . Remove the rear cover 2 . Reverse the procedure to reassemble. 1 2 24 IBM 4685-K03 Installation, Operation and Maintenanc...
Page 41 - Replacing the control card; Dip Switch Setting; On; Replacing the MSR
Replacing the control card 1. Remove the rear cover. See “Replacing the rear cover” on page 22. 2. Remove the screw labeled 2 which holds the ground cable 1 and the cover. 3. Open the cover. Disconnect the cables of two sheets for the membrane 4 and the other connectors from the control card 3 . 4. ...
Page 43 - that hold the speaker in place.; Replacing the top cover assembly
Replacing the mode key 1. Detach the guide label. Remove the two screws labeled 1 2. Remove the rear cover. See “Replacing the rear cover” on page 22. 3. Disconnect the cable leading to the control card. Remove the mode key 2 . Reverse the procedure to reassemble. Use the new guide label attached to...
Page 44 - Bill of material
_________________________________________________________________________________________ Bill of material Assembly: Keyboard 3 1 2 4 5 6 3 28 IBM 4685-K03 Installation, Operation and Maintenance Guide
Page 45 - Number Unit
Chapter 5 Maintenance of the keyboard 29 ASM-Index Part Number Unit Description 1 2 3 4 5 6 29R0782 29R0784 29R0786 29R0783 29R0785 29R0787 29R0788 07N1027 07N1032 07N1033 48G9045 29R0789 1 1 1 1 1 1 POS Keyboard Unit, 4685-K03 z Bottom Cover Asm z Control Card Asm z Top Cover, Asm z Magnetic Stripe...
Page 47 - Appendix A. Accessory unit; Accessory units
_________________________________________________________________________________________ Appendix A. Accessory unit You should order accessory units from an IBM sales representative or your dealer. Accessory units Item number Name Content Quantity 3891 Key (Single) Key (Single) Key cap (Single) Key...
Page 49 - Appendix B. Product specifications; Dimensions; Condition; MSR readable cards; Card specifications
Appendix B. Product specifications Dimensions 4685-K03 Width 365 mm Depth 170 mm Height 50 mm Weight 1.1 Kg Consumption current Peak: 400 mA Normal: 100 mA Environment condition Condition Temperature( ℃ ) Humidity (%) Max wet bulb temperature( ℃ ) Operating 0 ～ +40 8 ～ 90 +23 Standby 0 ～ +43 8 ～ 90 ...
