IBM 40/80 GB DLT - Manual - manualsarea.com

Page 3 - Contents; iii

Contents Safety: Read first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . v About this book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Part 1: Installation, use, and maintenanc...

Page 4 - iv 40/80 GB DLT Internal Tape Drive

Safety: Read first Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações deSegurança. Před instalací tohoto produktu si přečtěte příručku bezpečnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Ennen kuin ase...

Page 5 - Registering your option; About this book

Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy. Antes de instalar este producto lea la información deseguridad. Läs säkerhetsinformationen innan du installerar den härprodukten. Registering your option Thank you for purchasing OPTIONS by IBM  . Please take a few moments to regi...

Page 6 - vi 40/80 GB DLT Internal Tape Drive

Page 8 - Installation requirements; Installing the drive

http://www.ibm.com/pc/us/solutions/accessories/tapedrives.html and follow the softwarelinks. The CDs also contain backup applications that are used with other products but are notapplicable to the 40/80 GB DLT Internal Tape Drive. Supported tape driveconfigurations can be found on the IBM Netfinity ...

Page 9 - Installing the drive in IBM servers

Installing the drive in IBM servers The tape drive is compatible with the Netfinity  8500 or 8500R 4 , Netfinity 7000 8 , Netfinity 5500, and Netfinity 5000 servers. For instructions on installing the tapedrive in a server, go to the “Installing Internal Drives” section in the server’s User’sHandbo...

Page 10 - Installing the drive in other computers; Step 1. Selecting a SCSI ID; Step 2. Preparing for installation

Installing the drive in other computers Follow these steps to install the tape drive in other computers. Step 1. Selecting a SCSI ID Each device on a SCSI bus must have a unique SCSI ID. You can select a SCSI IDfrom 0 to 6 for the tape drive. The SCSI ID must be supported by your SCSI adapter.Refer ...

Page 12 - Step 4. Mounting the drive; Step 5. Attaching cables

If you choose the default SCSI address of 5, proceed to Step 4. If you need to changethe SCSI address, use the SCSI ID jumper block to set your SCSI ID. Removeand reposition jumpers to set the ID. If necessary, use a pair of flat-nose pliers toremove the jumpers. The following illustration shows how...

Page 14 - Step 9. Installing backup and restore software; Using the drive

If all the indicators on either side of the tape drive blink in unison, there is a problemwith the tape drive. Press the Unload button on the right side of the drive front panelto eject any tape that might be inserted and to reset the drive. If the problem persists,turn off the computer; then turn i...

Page 16 - Selecting data cartridges; Caring for tape cartridges

.12/ 20.0 (yellow): When this indicator lights steadily, the tape is recorded at 20.0 GB capacity. When this light is blinking, it indicates that you requested thiscapacity. .13/ 10.0/15.0 (yellow): When this indicator lights steadily, the tape is recorded at 10.0 GB or 15.0 GB capacity. When this i...

Page 18 - write-protect switch; Loading and unloading data cartridges

The front of the cartridge has an orange write-protect indicator .1/ , and a write-protect switch .2/ to prevent accidental erasure. Slide the switch to the right to write-enable .3/ or to the left to write-protect .4/ . You can change the write-protect switch before or after inserting the tape. If ...

Page 19 - Cleaning the drive

.5/ Press the Unload button and wait for the green Operate Handle indicator tolight. .6/ Lift the Cartridge Insert/Release handle up to pop the tape cartridge out. .7/ Remove the tape cartridge from the drive. .8/ Push the Cartridge Insert/Release handle down. When you press the Unload button, the t...

Page 35 - Appendix A. Maintaining your tape drive; Tape handling and storage

Part 2: Appendixes The following appendixes contain the POST sequence, product specifications,problem-solving information, help and service information, the product warranty, andnotices. Appendix A. Maintaining your tape drive This section contains important information about maintaining your tape d...

Page 37 - Appendix C. Product specifications

Appendix C. Product specifications This appendix includes the product specifications and requirements. Physical specifications Height (with bezel) 86.3 mm (3.4 in) Width (with bezel) 148.3 mm (5.84 in) Length (with bezel) 243.8 mm (9.6 in) Weight 2.9 Kg. (6 lb, 7 oz) Maximum data capacity Tape Uncom...

Page 38 - Appendix D. Problem solving; The software does not recognize the tape drive.; The tape operation is unreliable or inconsistent.

Appendix D. Problem solving Operating environment Tape path temperature range + 10°C to + 40°C ( + 50°F to + 104°F) Relative humidity 20% to 80%, noncondensing Wet bulb 25°C (77°F) maximum Altitude − 152 to + 12 192 m ( − 500 to + 40 000 ft) Temperature gradient 11°C per hour Humidity gradient 10% p...

Page 40 - Appendix E. Help and service information

Appendix E. Help and service information See Appendix D, “Problem solving” on page 2-4 before requesting help or service. This section contains information on how to obtain online and telephone technicalsupport. Online technical support Online technical support is available during the life of your p...

Page 42 - Appendix F. Product warranty and notices; Warranty Statements; The IBM Warranty for Machines

Appendix F. Product warranty and notices Warranty Statements The warranty statements consist of two parts: Part 1 and Part 2. Part 1 varies by country. Part 2is the same for both statements. Be sure to read both the Part 1 that applies to your country andPart 2. United States, Puerto Rico, and Can...

Page 43 - WITHOUT WARRANTIES; WITHOUT WARRANTIES OF ANY KIND.

equivalent, you may return it to your place of purchase and your money will be refunded. Thereplacement may not be new, but will be in good working order. Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse, accident,modification, unsuitable physi...

Page 47 - Part 2 - Worldwide Country-Unique Terms

Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personalinformation contained in a Machine which you return to IBM or your reseller for any reason.You should remove all such information from the Machine prior to its return. Production Status Each IBM Machine...

Page 51 - Notices; Trademarks

Notices References in this publication to IBM products, programs, or services do not implythat IBM intends to make these available in all countries in which IBM operates. Anyreference to an IBM product, program, or service is not intended to state or imply thatonly that IBM product, program, or serv...

Page 52 - Electronic emission notices; Federal Communications Commission (FCC) Statement; FOR HOME OR OFFICE USE; Industry Canada Class B emission compliance statement

Electronic emission notices 40/80 GB DLT Internal Tape Drive Federal Communications Commission (FCC) Statement Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable pr...

Page 54 - Union Europea - Normativa EMC

Union Europea - Normativa EMC 2-20 40/80 GB DLT Internal Tape Drive

Page 56 - IBM

IBM  Part Number: P00N7816 Printed in U.S.A. PððN7816