IBM 1000-90 - Manual

4 General Information Documentation Files READ.ME - Recent changes.*.HLP - Help files.LCONFIG.LCR - List of configurations and help files.REFORMAT.PAS - Source code for REFORMAT program. The 1000-90 programs are approximately 243K bytes in size, andrun on any IBM PC/XT/AT/PS/2 or true IBM compatible...

COMM.EXE 5 COMM.EXE (General Purpose) Installation No special installation procedures are required to install the 1000-90program. Make a backup copy of the diskette if you plan to use the1000-90 program directly from the floppy disk, or copy the contentsof the diskette onto a hard disk drive in your...

6 COMM.EXE they appear in the existing configuration files (i.e., Com1 orCom2:Baud Rate, Data Bits, Stop Bits, and Parity). Any text editor can also be used to append the 'LCONFIG.LCR' fileas well. Model the new entries as they appear in this file, and savethe file as a Text (ASCII) file. F2 Change ...

COMM.EXE 7 Sending Files to the Computer LAI-2000Plant Canopy Analyzer The LAI-2000 is configured as a DCE device. Connect the LAI-2000 to your computer using the printer cable provided with theinstrument. To send files from the LAI-2000 to a computer, use thefollowing functions, found in the COMM e...

8 COMM.EXE The data dump can be aborted by pressing the OUT key again. LI-1400 DataLogger The LI-1400 is configured as a DTE device. Most computers can beconnected to the LI-1400 using the 1400-550 printer cable. To sendfiles from the LI-1400 to a computer, follow these steps: 1. Use the Setup Hardw...

COMM.EXE 9 LI-3000A Portable Area Meter The LI-3000A is configured as a DCE device. Most computers canbe connected to the LI-3000A using the 1000-04 printer cable and afemale-to-female gender changer. To send files from the LI-3000Ato a computer, use the following functions: 1. Press the MENU key to...

10 COMM.EXE LI-1800 (UW) Portable Spectroradiometers The LI-1800 and LI-1800UW Portable Spectroradiometers areconfigured as DCE devices. There are two ways to connect thecomputer to the LI-1800 or LI-1800UW. Terminal Port 1. Connect the computer to the terminal port on the LI-1800 usingthe 1000-04 p...

COMM.EXE 11 FCT 53 - Output a range of page files. The print format is selected by the PRN FMT (U/S) option in FCT 42. The system format isselected in FCT D8, and the user format is defined in FCT D9. Any list can be printed by pressing PRINT while viewing the list. LI-6400 Portable Photosynthesis S...

12 COMM.EXE The LI-6252 CO 2 and LI-6262 CO 2 /H 2 O Analyzers are both configured as DCE devices, and can be connected to most computersusing the 1000-04 printer cable. The 1800-04 printer cable will workwith most computers that have a 9-pin AT-style RS-232C port. To send data from the LI-6252 or L...

COMM.EXE 13 pressing <CTRL>Q. If you encounter data transmissionproblems, change the volume on the tape recorder and try again. Cables There are 2 types of RS-232C devices: DTE (Data TerminalEquipment) and DCE (Data Communications Equipment). If a DTEdevice is connected directly (pin-for-pin) ...

14 COMM.EXE This device cable configured as cable part # LI-6200 Male DCE LI-6000 Male DCE LI-1000 Female DCE 1000-09 LAI-2000 Female DTE 2000-02 LI-3000A Male DTE 1800-04 LI-1800 terminal port Male DTE 1800-04 LI-1800UW terminal port Male DTE 1800-04 LI-6252 & LI-6262 Male DTE 1800-04 The cable...

EQUIP.EXE 15 EQUIP.EXE (General Purpose) EQUIP.EXE is a diagnostics program that is useful for determininghardware compatability problems between your computer and theinstrument that is connected to it. This program indicates the statusof the major modem lines on all RS-232C ports in your computer.R...

16 EQUIP.EXE CONFIGURED - lists baud rate, data bits, stop bits, and parity. RTS (4) - Ready To Send status, transmitted on modem cable line 4. CTS (5) - Clear To Send status, transmitted on modem cable line 5. DSR (6) - Data Set Ready status, transmitted on modem cable line 6. CD (8) - Carrier Dete...