Page 2 - Table of contents
2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................
Page 3 - Important safeguards; BEFORE USING
3 Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDEDTEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system.Disconnect the v...
Page 4 - Installation/ connection; Installation opening
4 Installation/ connection First complete the electrical connections, and then check them for correctness. Installation opening This unit can be installed in any dashboard having an opening as shown on thepicture. The dashboard should be 4.75 – 5.56 mm thick in order to be able tosupport the unit.1....
Page 6 - Using the ISO Connector; Location; Connector A
6 Note: For your driving safety, please link your parking wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play video disc. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to mod...
Page 7 - Panel controls; Front panel; Rotate VOL knob to adjust the volume.
7 Panel controls Front panel 1. PWR/MOD button Press POWER button to turn the power on, press and hold for 2 seconds to turn the power off. 2. Adjust angle +/-3. TFT display4. WIDE button. Press it to choose screen format - 16:9 or 4:35. RESET button6. OPEN button. Press it to open display7. EJECT b...
Page 9 - Remote control
9 Remote control 1. MODE button2. POWER button3. BND button4. Directional buttons for menu selection5. ENTER button6. STOP/REVERSE button7. AMS/PAUSE button8. ST button9. LOC/PLAY button10. VOL +/- button11. PBC button12. OSD (On Screen Display) button13. Digit area14. PANEL ANGLE ADJUST button15. O...
Page 10 - Changing the battery; Press the catch and at the same time pull out the battery tray.
10 24. AUDIO button25. GOTO button Changing the battery 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. Warning: Store the battery w...
Page 11 - General operation; Reset the unit; unit on it will resume the stored status which you set.; Volume control; Press the VOL once, then rotate to adjust the volume level.
11 General operation Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit.Press the RESET button by using a ball-point pen or a similar tool to restore the unit to the original factorysettings. Power button Press POWER/MODE button on the un...
Page 12 - Mute control
12 - BALANCE control Press the VOL 4 times, then rotate to adjust the balance level. - FADER control Press the VOL 5 times, then rotate to adjust the fader level. - LOUDNESS control Rotate the knob clockwise to activate LOUD ON, rotate anticlockwise to activate LOUD OFF. - EQ control Rotate the knob...
Page 13 - button on the RC to adjust the TFT Panel; Screen setting
13 ST selector During the radio mode press the ST button on the RC to switch left speaker/right speaker/stereo. Adjust angle Press the Adjust angle +/- buttons on the front panel or button on the RC to adjust the TFT Panel angle to your need. Screen setting Press the WIDE button on the front panel t...
Page 14 - Digital tuner; Band selection; buttons on the RC repeatedly to select a; Programming tuner stations; buttons
14 Digital tuner Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press MODE button to select Radio mode.Press BND button on the RC once or more to selec...
Page 16 - Press PTY button for the 3; time to switch the PTY function off.
16 PTY (Program Type) 1. Rotate the navigation knob to choose PTY function. The previous PTY type is shown. 2. Press PTY once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons1 - 6 to select the desired program type (see the following table). 3. When PTY is sele...
Page 17 - Local/Distance Control; TV operations; TV tuning (only when TV antenna is connected); Note; : car TV antenna is not included into the set.
17 Local/Distance Control In radio mode, press the “LOC/PLAY” button on the RC to select local or distance reception.a. “LOC ON” showing on the display, means local reception is turned on;b. “_DX_” showing on the display, means distant reception is turned on.Local and distance reception setting can ...
Page 18 - Glossary; Title
18 Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, itcan playback interactive software with the menu displayed on TV. And if the disc contains still images, it canplayback high definition of still image. Title T...
Page 19 - Disc operations; Discs for playback
19 Disc operations Discs for playback This unit can play all digital audio CD, DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW.The following file types are supported:Audio files: MP3 (*.mp3) WMA (*.wma)Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1...
Page 21 - Repeat playback; RPT icon will appear on the display.; GOTO function; buttons to select the desired item.
21 Repeat playback Press the RPT button on the panel once or more to repeat the playback: For VCD/CD/MP3: display appears RPT ONE => RPT OFFFor DVD: display appears RPT CHAP => RPT TITL => RPT ALL RPT icon will appear on the display. Random playback (for CD/VCD/MP3 discs) During disc playba...
Page 22 - selected track for playback.; MENU selector; Press; System switch
22 3. The VCD starts playing the selected title automatically or press PLAY/ PAUSE button to confirm the selected track for playback. 4. Press STOP button to return to menu.5. Press PBC again to exit menu. MENU selector Press , , , buttons or rotate navigation knob to select the desired menu, then p...
Page 23 - Changing size; Press ZOOM. The picture will be enlarged accordingly: 1x – 2x – 3x – 4x – OFF.
23 On-screen display Press OSD button. The display shows single track elapsed time, single track left time or entire disc left time. Pressit again, the display shows DVD/VCD/MPEG4/CD mode, the track being played, the amount of the whole disc. Using the TITLE (for DVD only) 1. Press TITLE to display ...
Page 24 - MP3 overview
24 MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the...
Page 25 - Notes on creating your own CD-R or CD-RW containing MP3 files:
25 Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHzand a fixed bit rate o f 128 kbps.DO NOT store more than 448 MP3 files per disc.For ISO 9660 - compliant format, the maximum allowa...
Page 26 - DVD setup; Language setup; Setting OSD Language
26 DVD setup Press SETUP button on the remote control to display DVD setup screen. Usethe cursor buttons to select the desired option or item. Press ENTER button toconfirm option. Language setup Setting OSD Language Press the cursor button and the ENTER button to select the desired language: English...
Page 27 - Setting DVD Menu Language; Video setup; bottom side of the TV screen when play the wide screen picture.; Setting TV System; Rating
27 Setting DVD Menu Language Select a kind of language for the menu of DVD disc from the languages which are contained in the DVD disc:English, German, French, Spanish, Italian, Dutch, Russian. Video setup Setting TV Display type4: 3PS (pan scan): It is adapted to the TV with common size. The left a...
Page 28 - The rating can be selected only under the password setting status.; Load factory; If this item is selected, the unit will become the original setting.
28 Setting Password This item is originally set as locked status. Under this status, we can not make the selection on the “RATING”item or change the password. If you want to set the “RATING”, please input the password or the originalpassword “8888” (if you set it for the first time). Then press the ...
Page 30 - Cleaning the cabinet
30 Handling discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temperature or dust...
Page 31 - Troubleshooting guide; Symptom
31 Troubleshooting guide Symptom Cause Solution GeneralNo power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. DiscDisc cannot be loaded. Presence of disc inside the player. Remove the ...
Page 33 - Specification; General; Maximum power output:; TFT display; MW section; Preset memory stations:
33 Specification General Power supply: 14.4 V DC Current consumption: Max. 10 A Maximum power output: 60 W x 4 channels Compatible formats: DVD/SVCD/VCD/HDCD/MP3/MP4/DivX/MPEG4/WMA/CDDA/Picture-CD/JPEG/CD-R/ -RW/DVD±R/±RW playback Dimensions (L x W x H) / weight: 192 x 178 x 50 mm / 1.75 kg Working ...
Page 34 - Audio specification; Separation; Line out; TV bands
34 Specifications are subject to change without notice. Mass and dimension are approximate. Audio specification Maximum output: 2 Vrms (+/- 3 dB) Frequency response: 20 Hz - 20 KHz S/N ratio(A-vtd): 85 dB Separation 80 dB DSP sound effect: Classic, Rock, Pop, Flat Line out Output: CD max 2000 mV TV ...
Page 37 - DVD
37 . . / , . 4,75 – 5,56 , . 1. . , ( ). 2. . . 3. . , , . , . : . DVD .
Page 39 - ISO
39 : , . , . . : !!! , ( ), . . ISO 1. ISO, , . 2. ISO , . 3. , . A B 1 (+)--- 2 (-)--- 3 (+)--- 4 12 (+)/ (-)--- 5 / (+)--- 6 (-)--- 7 ACC+/ (+)--- 8 (-)---
Page 46 - SEL
46 POWER/MODE MODE , : /DVD/ /AUX CD- , POWER/MODE CD- . DVD, . ST / / . +/- . WIDE : 16:9 4:3. OPEN OPEN SCREEN , . . SEL SET . . SET . SET 3 DVD . . SET .
Page 55 - VCD
55 GOTO , , . 1. GOTO, : => => => . . 2. . 3. ENTER, . PBC ( ) ( VCD ) VCD PBC, 1- . 1. , . 2. , / – . 3. , PLAY/ PAUSE, . 4. STOP , VCD. 5. , . , , , . ENTER PLAY/PAUSE .
Page 56 - AUDIO
56 BND PAL/SECAM/NTSC. BND AUTO/PAL/NTSC. DVD : AUDIO , ( , ). VCD : AUDIO , : L R STEREO ( ). ( DVD ) . SUB.T . , . 5 , . OSD. , . , (DVD/VCD/MPEG4/CD), , .
Page 57 - ANGLE
57 ( DVD ) 1. TITLE, . 2. , , , . 3. ENTER. / . ( DVD ) DVD- , ANGLE . , . 1 , . ZOOM. : 1 – 2 – – 4 – .
Page 60 - ENTER
60 DVD SETUP, . / , . / , . ENTER, . ENTER, . ENTER : , , , , , , . , DVD- , : , , , , , , , . DVD . .
Page 66 - ESP; FM
66 : 14.4 : 10 : 60 4 : DVD/SVCD/VCD/HDCD/MP3/MP4/DivX/MPEG4/WMA/CDDA/Picture-CD/JPEG/CD-R/ -RW/DVD±R/±RW ( ) / : 192 178 50 / 1.75 : -10º - +60º ESP 40 CD, 120 3 : 7” : 480 234 dpi : 4:3 : 300 : 350 2 FM : 65.0 – 74.0 / 87.5 – 108.0 MHz : 6 18 MW : 522-1620 12
Page 67 - DSP
67 . . : 2 RMS (+/-3 ) : 20 – 20 (A-vtd): 85 80 DSP Classic, Rock, Pop, FlatCD . 2000 VL, VH, VHFPAL/SECAMBG/DK/I65
