Hyundai H-CDM8012 - User Manual

6 Speaker connection Notes: In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortionduring high volume level.Prohibit to make the conductors of auto antenna and ground touch with each other. 0.5 &15 A

7 Panel controls 1. SEL button and VOLUME Knob Rotate it to adjust the volume level.Press it to enter the characteristics list. 2. SCN button In Radio mode, press the SCN button to scan the radio frequency. If a valid signal has detected, the currentfrequency will be hold for 5 seconds, then press S...

9 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit.Press OPEN button and remove the front panel, then press the RESET button on the inner panel to restore the unitto the original factory settings. Power button Press a...

10 Setting the clock To show the time:- In Radio mode when RDS data is received press the CLK button to select the mode: PS NAME =>FREQUENCY => PTY => CLOCK. - In Radio mode when RDS data is not received press the CLK button to select the item: FREQUENCY =>PTY NONE => CLOCK. - In Disc...

11 Setting other characteristics Press and hold for 2 seconds the SEL button to enter the setting mode.Press the SEL button or button to select the setting: EQ => CLK 12H/24H => CT => STEREO => LO/DX => AREA => VOL PGM => BEEP => CLK ON => SEEK RDS => TA SEEK => TA V...

12 When TP information gets lost at the current station for retune time which is set by retune time (40 seconds), theradio start to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radioretunes to next station with TP information. TA alarm: when this mode i...

13 Digital tuner operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either. Band selection Press the BAND button to select a band: FM1, FM2, FM3, AM1, AM2. Display wi...

16 Disc operations Discs for playback This unit can play disc types: CD/CD-R/-RW.Compatible with formats: MP3/WMA/CDDA. Loading a disc 1. Turn the power on.2. Press the OPEN button on the panel to flip it down.3. Insert the disc with the printed side facing upward into the slot.4. Close the front pa...

17 Fast-forward/ fast-backward playing Press and hold the / buttons to start fast playing in backward or forward direction. Repeat playback During CD playback press the RPT button to start repeat playback. Press again to cancel.During MP3/WMA playback press it and hold for 2 seconds to start repeat ...

18 MP3/WMA directory search Press BAND button twice, the LCD will display NAVIGA. Rotate the VOL knob or press the SEL button to enter the navigate search mode.Rotate the VOL knob to select the desired track or directory on the disc. To enter the selected directory, press SELbutton. Rotate the VOL k...

19 MP3 overview MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support theMP3 data writt...

20 Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHzand a fixed bit rate o f 128 kbps.DO NOT store more than 448 MP3 files per disc.For ISO 9660 - compliant format, the maximum allowa...

22 Handling discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temperature or dust...

23 Troubleshooting guide Symptom Cause Solution General No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. DiscDisc cannot be loaded. Presence of disc inside the player. Remove the...

24 Specification General. Power supply: 12 V DC Current consumption max. 15A Maximum power output: 50Wx4 channels Fuse: 15A Dimensions (W x H x D) 178 x 50 x 165 mm FM Stereo Radio. Frequency range: 87.5 -108.0 MHz Usable sensitivity: 3 uV I.F. Frequency: 10.7 MHz AM Section Frequency range: 522 kHz...

39 A. , 5 . . , . . 2 A. , . 6 . , . , A. . RDS : PI, PS, TP, PTY, TA, AF, DATA. PI: . PS: – . TP: – , . TA: – . AF: – , . TA ( ) , / . , .

43 2 , / . PLAY/PAUSE, . : , , . RPT, . , . MP3/WMA , 2 RPT, . , . RDM, . , . MP3/WMA , 2 RDM, . , . Intro 10 . INT. .