Page 2 - CONTENTS
2 – English CONTENTS Introduction ......................................... 3 Key to symbols .................................... 4 Safety instructions .............................. 5 Description .......................................... 7 Fuel handling ..................................... 12 Sta...
Page 3 - INTRODUCTION
English – 3 INTRODUCTION ! WARNING! Under no circumstances may thedesign of the machine be modifiedwithout the permission of themanufacturer. Always use genuineaccessories. Non-authorisedmodifications and/or accessoriescan result in serious personalinjury or the death of the operatoror others. Your ...
Page 4 - KEY TO SYMBOLS
4 – English KEY TO SYMBOLS Symbol Description Location Operator ’s manual Blower Checks and/ormainten-ance shall becarried out after havingswitched off theengine. The stopswitch must be set tothe STOP position. Cleaning at regularintervals is required. Approved protectgoggles or visor mustbe worn. A...
Page 5 - Personal safety equipment; Personal safety
English – 5 Personal safety equipment Fuel safety ! Special safety instructions apply to the type of fuelused for the blower. These instructions are specifiedunder ”Fuel handling” on pages 11 and 12. The following instructions apply to personsoperating the blower: 1. The operator shall have read and...
Page 6 - Safety equipment
6 – English 1. Do not allow bystanders or animals to be in the work area, i.e. 10 metres from the operator. 2. The blower may throw objects at high velocity that can ricochet and hit the operator. This maycause serious eye damage. 3. Never point the blower nozzle toward people or animals. 4. Stop th...
Page 7 - DESCRIPTION
English – 7 DESCRIPTION The blower 1. Shoulder strap2. Throttle trigger3. Stop switch4. Throttle lock5. Shoulder strap ring6. Anti-vibration system (inside the housing)7. Fan housing8. Fuel cap9. Air filter10. Choke11. Inspection cover (225B X-SERIES ) 12. Cutters (225B X-SERIES ) 13. Fan impeller14...
Page 10 - Inspection cover(225B; Other equipment
10 – English DESCRIPTION 2 4 15 14 7 13 12 11 Throttle trigger (2) The speed and the output of the engine are regul-ated by the throttle trigger. The throttle lock (4) mustbe pressed down before the trigger will actuate thethrottle. Fan casing (7) The blower fan casing (7) together with the impeller...
Page 12 - Fuel mixture
12 – English Fuel mixture WARNING!Allow adequate ventilation whilehandling fuel. NOTE!The machine is fitted with a two-stroke engine andmust always be run on a mixture of gasoline andtwo-stroke oil. It is important to measure the quantityof oil accurately, to ensure the correct mixture ratio.Small d...
Page 13 - FUEL HANDLING; Fuelling
English – 13 Olja • Olje Olie • Öljyä Lit. 5 101520 2%(1:50) 0,100,200,300,40 BensinBensinBenzin Bensiiniä Lit. O FUEL HANDLING Mixture • Always mix gasoline and oil in a clean container intended for fuel. • Always start by filling half the quantity of gasoline required. Then add the entire oil quan...
Page 14 - START AND STOP; Start
14 – English START AND STOP WARNING!Never start the blower if theinspection cover is not closed, isdamaged or cannot be closed.(Exception: When the vacuum tubeis fitted). ! IMPORTANT!Do not pull out the starter cord completelyand do not release the starter handle fromthe fully pulled out position. D...
Page 15 - Stop
English – 15 START AND STOP Press the machine body against the ground usingyour left hand (NOTE! Do not use your foot). Gripthe starter handle with your right hand and slowlypull the starter cord out until you feel someresistance, (the starter hooks grip) now quickly andpowerfully pull the cord.Imme...
Page 16 - USING THE BLOWER; To blow away debris on the; Blowing
16 – English USING THE BLOWER WARNING!When fitting the blower tube andnozzle, the engine must beswitched off and the stop switchmust be in the stop position. ! The blower tube and nozzle have a bayonet mount.Fit them in the following manner: 1. Press the blower tube (15) against the blower air outle...
Page 18 - Vacuuming
18 – English USING THE BLOWER 1. Open the collection bag. Insert the collection bag tube from inside the bag to fit in thevacuum inlet opening of the bag as illustrated inthe adjacent figure. Close the zipper on the bag. 2. Press the collection bag tube on the blower, turn it 1/4 of a turn until a s...
Page 20 - MAINTENANCE; Function; Carburetor; Adjustment
20 – English MAINTENANCE The fuel quantity required in relation to the air flow,provided by the opening in the throttle, is adjustedby the L and H jets. If they are screwed clockwise,the air/fuel mixture becomes leaner (less fuel) and ifthey are screwed counterclockwise, the mixturebecomes richer (m...
Page 21 - Cooling system
English – 21 MAINTENANCE Muffler NOTE!Some mufflers are fitted with a catalytic converter.See “Technical data” to see whether you clearing saw is fitted with a catalytic converter.The muffler is designed to dampen the noise leveland to direct the exhaust fumes away from the user.The exhaust fumes ar...
Page 23 - Daily maintenance
English – 23 MAINTENANCE 1 2+3 4 5 8 1+3 4 5 6 7 8 2 Maintenance schedule A number of general maintenance instructions aregiven below. If more detailed instructions arerequired, get in touch with your local servicingdealer. Daily maintenance 1. Clean the exterior surfaces of the blower. 2. Check tha...
Page 24 - Monthly maintenance
24 – English MAINTENANCE Monthly maintenance 1. Flush the fuel tank with clean gasoline, which afterward should be disposed of in an environ-mentally correct manner. 2. Clean the outside of the carburetor and the space around it. Replace damaged parts. 3. Clean the fan blades on the flywheel and the...
Page 25 - TECHNICAL DATA
English – 25 TECHNICAL DATA 225B 26,935283.0008.2007.4000.9 kW/9000 rpmNo Walbro CDChampion RCJ 7Y0.5 Walbro/WT0.4 5.1 89 105 2.64,3 Radial fan83 (300)600 EngineCylinder volume, cm 3 : Cylinder bore, mm:Stroke, mm:Idling speed, rpm:Max. speed – blowing, rpm:Max. speed – vacuuming, rpm:Max. engine ou...
Page 26 - FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
26 – English ´+H"[¶5B¨ FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (U.S. Environmental Protection Agency), CARB(California Air Resources Board) and Husqvarna Forest &Garden are pleased to explain the emissions controlsystem warranty...
