Page 2 - TABLE OF CONTENTS
TABLE OF CONTENTS English - 3 1. Introduction and safety .............................................................. 5 1.1 Introduction ..................................................................................... 5 1.2 Symbols on Automower™ ..................................................
Page 4 - INTRODUCTION AND SAFETY; bold; IMPORTANT INFORMATION
English - 5 1. INTRODUCTION AND SAFETY 1. Introduction and safety 1.1 Introduction Congratulations on your choice of an exceptionally high quality product. To get the best results from your Husqvarna Automower™ requires knowledge of its function. This Operator's manual contains important information...
Page 5 - Symbols on Automower
6 - English 1. INTRODUCTION AND SAFETY 1.2 Symbols on Automower ™ These symbols can be found on the lawn mover. Study them carefully so you understand their significance. • Read through the Operator’s Manual carefully and understand the content before using your Automower. • The warnings and safety ...
Page 6 - WARNING
English - 7 1. INTRODUCTION AND SAFETY 1.3 Symbols in the Operator’s Manual These symbols can be found in the Operator’s Manual. Study them carefully so you understand their significance. • Inspection and/or maintenance must be carried out with the main switch set to OFF . • Always wear protective g...
Page 7 - Safety instructions; Use
8 - English 1. INTRODUCTION AND SAFETY 1.4 Safety instructions Use • Please read the Operator's Manual carefully and make sure you understand the instructions before using Automower. • It is not permitted to modify the original design of Automower. All modifications are made at your own risk. • Chec...
Page 8 - Transport; Maintenance; The main switch should be set to the; position during all work on the
English - 9 1. INTRODUCTION AND SAFETY Transport The original packaging should be used when transporting Automower over long distances. To safely move from or within the working area: 1. Move the main switch to the OFF position if you intend to carry the mower. 2. Carry the mower by the handle at th...
Page 11 - Function of Automower; Capacity; Mowing technique
12 - English 2. PRESENTATION 2.2 Function of Automower ™ Capacity Automower is recommended for lawns up to 500 m 2 . The size of the working area the mower can handle depends on how much it is used. The larger the lawn the more occasions per week the Automower can work. How large an area is mown per...
Page 13 - Working method
14 - English 2. PRESENTATION Working method Automower automatically mows the lawn. Automower automatically mows the lawn. When the battery is discharged the mower stops on the lawn, and you need to carry it to the loop generator/charger for charging. When Automower body hits an obstacle, the mower r...
Page 14 - Movement pattern; in several
English - 15 2. PRESENTATION Movement pattern The mower’s movement pattern is irregular and is determined by Automower itself. A movement pattern is never repeated. This mowing system means the lawn is mown equally without any mowing lines. 2.3 One Automower ™ in several gardens One Automower can ea...
Page 15 - Carry out the installation in the following steps:
16 - English 3. INSTALLATION 3. Installation This chapter describes how you install Husqvarna Automower™. Before starting the installation read the previous chapter 2. Presentation . Read the whole of this chapter too before starting the installation. How the installation is made also affects how we...
Page 17 - Charging the battery
18 - English 3. INSTALLATION Tip! If, for reasons of space or for some other reason, it is not suitable to charge the mower where the loop generator/charger is positioned, a freestanding charger can also be used. A charger can be purchased as an accessory. Contact your dealer for further information...
Page 18 - Installation of the boundary wire; Best position for the boundary wire
English - 19 3. INSTALLATION 3.4 Installation of the boundary wire The boundary wire can be installed in one of the following ways: • Securing the wire to the ground with staples. It is preferable to staple down the boundary cable, if you want to make adjustments to the boundary wire during the firs...
Page 19 - Boundaries for the working area
20 - English 3. INSTALLATION Boundaries for the working area If a high obstacle, for example a wall or fence, borders the working area, the boundary wire should be laid 35 cm from the obstacle. This will prevent Automower from colliding with the obstacle and reduce body wear. If the working area bor...
Page 20 - Boundaries within the working area
English - 21 3. INSTALLATION Boundaries within the working area Use the boundary wire to demarcate areas inside the working area by creating islands around obstacles that can not withstand a collision, for example, flower beds and fountains. Run the cable out to the area, route it around the area to...
Page 22 - Laying out the boundary wire
English - 23 3. INSTALLATION Automower can mow areas inside the working area that slope up to 35 cm per distance metre (35 %). Areas that slope more must be demarcated by the boundary wire. When any part of the working area's boundary slopes more than 10 cm per distance metre (10 %), the boundary wi...
Page 25 - Connecting the boundary wire
26 - English 3. INSTALLATION 3.5 Connecting the boundary wire Connect the boundary wire to the loop generator/charger: 1. Place the cable ends in the connector: • Open the connector. • Place the wire in the connector grip. 2. Press the connector together using a pair of pliers. Press until you hear ...
Page 26 - Checking the installation; STOP
English - 27 3. INSTALLATION 3.6 Checking the installation Check the loop signal by looking to see what indication the green LED on the loop generator/charger is giving. • Steady light = the signal is okay. • Flashing once every other second = break in the loop and no signal found. • Flashing twice ...
Page 27 - Starting AutomowerTM; YES; Stopping AutomowerTM
28 - English 4. USE 4. Use 4.1 Starting Automower™ 1. Press the STOP button to open the control panel cover on Husqvarna Automower™. 2. Set the main switch to the ON position. 3. Enter the PIN code, confirm with the YES button. 4. Close the cover. 5 beeps are heard over 2 seconds when the blade disc...
Page 28 - Switching off AutomowerTM; Adjusting the cutting height
English - 29 4. USE 4.3 Restart To start: 1. Enter the PIN code. 2. Press the YES button. 3. Close the control panel cover. 4.4 Switching off Automower™ 1. Press the STOP button. 2. Set the main switch to the OFF position. Always switch off Automower using the main switch if you intend to perform ma...
Page 29 - Changing the PIN code
30 - English 4. USE 3. Turn the knob to the required position. The selected position is the marking on the knob that aligns with the arrow on the body. • Turn clockwise to raise the cutting height. • Turn anticlockwise to lower the cutting height. 4. Close the cover. Ensure that the catch button loc...
Page 33 - - Proposed installation; Proposals for installation
34 - English 6. GARDEN EXAMPLE 6. Garden example - Proposed installation An number of installations of Husqvarna Automower™ in different types of gardens are shown and explained in this chapter. See the examples as pointers for how to make the installation in your garden as good as possible. Also se...
Page 36 - AutomowerTM; Loop generator/charger
English - 37 7. MAINTENANCE 7.2 Winter storage Automower™ Automower must be carefully cleaned before winter storage, see 7.4 Cleaning on page 39. Charge the battery fully before winter storage. Turn the main switch to the OFF position. Store the mower horizontally on all four wheels in an area that ...
Page 37 - Underframe and blade disc; Chassis
38 - English 7. MAINTENANCE Underframe and blade disc 1. Set the main switch to the OFF position. 2. Wear protective gloves. 3. Lift Automower onto its side. 4. Clean the blade disc and underframe using, e.g. a dish-brush. At the same time, check that the blade disc rotates freely in relation to the...
Page 38 - Body; Replacing the blades
English - 39 7. MAINTENANCE Body Use a damp, soft sponge or cloth to clean the body. If the body is very dirty it may be necessary to use a soap solution or washing-up liquid. 7.5 Replacing the blades There are three blades on Automower, which are screwed into the blade disc. The blades have two edg...
Page 41 - Flashes
42 - English 8. TROUBLE SHOOTING 3 Upside down Automower leans too much or has turned over. Turn the mower the right way up. 3 Trapped Automower has got caught in something. Free Automower and rectify the reason for it getting trapped. 4 Outside working area If this occurs in isolated areas it may b...
Page 42 - Automower vibrates
English - 43 8. TROUBLE SHOOTING 8.2 Fault symptom If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists; contact your dealer. Symptom Cause Action Uneven mowing results Automower works too few hours per week. Increase the mowing time. Working area...
Page 43 - Data
44 - English 9. TECHNICAL DATA 9. Technical data 10. Environmental information The symbol on Husqvarna Automower™ or its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and...
Page 44 - EU DECLARATION OF CONFORMITY; EU Declaration of Conformity (only applies to Europe)
English - 45 11. EU DECLARATION OF CONFORMITY 11. EU declaration of conformity EU Declaration of Conformity (only applies to Europe) Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the automatic lawn mower Husqvarna Automower™ from year 2007 se...
Page 47 - INDEX
12. INDEX 48 - English Cleaning .............................................................. 37 Safety Instructions ................................................. 9 Service ................................................................ 37 Underframe ..............................................
