Husky HSK140HD - Manual
Husky HSK140HD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INFORMATION; DO NOT; DO NOT open; INTRODUCTION
- Page 4 – Charging with 12 VOLT DC Adapter; AC RECHARGE; PERIODIC MAINTENANCE; DC PLUG FUSE REPLACEMENT
- Page 5 – REPLACING THE BATTERY PACK; MANUF; RUBBER; FIGURE 6B
- Page 6 – SAFE BATTERY DISPOSAL; Battery Disposal Warnings:; • Do not expose battery to fire or intense heat as it may explode.; SPILLABLE LEAD
- Page 7 – HUSKY 2 YEAR LIMITED WARRANTY PROGRAM; will return it to you within four weeks.
1
OWNER’S MANUAL
& WARRANTY INFORMATION
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USING, READ AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS,
PLUS YOUR VEHICLE’S BATTERY MANUFACTURER GUIDELINES. FAILURE TO DO SO COULD
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312
TOLL FREE: 800-916-7004
1.25 MILLION CANDLE POWER
CORDLESS RECHARGEABLE SPOTLIGHT
ROTATING HANDLE AREA UTILITY LIGHT
HSK140HD
319-349
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT SAFETY INFORMATION WARNINGS: Contains non-spillable sealed lead acid battery. Must be recycled or disposed of properly. DO NOT dispose of batteries in fire, as this may result in an explosion. DO NOT open battery or short circuit, as this may cause the battery to leak or get hot,causing ...
4 Charging with 12 VOLT DC Adapter - Plug the DC fused Recharge Adapter (included) into the Recharge Port (barrel receptacle) just behind the rubber Bezel and then insert the ciga- rette lighter plug into the cigarette lighter socket of your vehicle or other 12 VDC power source. Make sure the Lockin...
5 ment bulb. Bulb life can be shortened by installing a bulb with dirt or fingerprints on it. The bulb can be wiped clean with cloth moistened with alcohol. During bulb installation, avoid touching the glass part of the bulb. (See Figure 6A and 6B for details) 1. Disconnect the unit from any chargin...
