Husky 647648 - Manual
Husky 647648 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents; Manual Description
- Page 3 – To Order Parts for Your Existing Pump
- Page 4 – TP
- Page 5 – Warnings; WARNING; Use equipment only in well ventilated area.; Ground all equipment in the work area. See Grounding instructions.; Use only grounded hoses.
- Page 6 – Do not alter or modify equipment.
- Page 7 – Read MSDS’s to know the specific hazards of the fluids you are using.
- Page 8 – Installation; General Information
- Page 9 – Fluid supply container: Follow local code.; Air Line
- Page 10 – Air Exhaust Ventilation; Place a container at the end of the air
- Page 11 – Fluid Supply Line; . 3. Waste oil or general fluid transfer, typical installation
- Page 12 – Fluid Outlet Line; See F; Fluid Inlet and Outlet Ports
- Page 14 – Fluid Pressure Relief Valve; Evacuation and Transfer Systems (Model 647016); (not acceptable for fuel dispense application)
- Page 15 – Operation; Pressure Relief Procedure
- Page 16 – Gear Oil Evacuation Systems; Fuel Dispense Systems; Pump Shutdown
- Page 17 – Maintenance; Maintenance Schedule; • Flush before fluid can dry in the equipment,
- Page 18 – Torque Instructions
- Page 19 – Dimensions
- Page 20 – Performance Chart; Test Conditions: Pump tested in water with inlet submerged.; Fluid Pressure
- Page 21 – Technical Data
- Page 22 – Graco Standard Husky Pump Warranty
Operation
Husky
®
1050A UL-Listed
Diaphragm Pumps
Model 647016, Evacuation and Transfer Pump
For use in general fuel transfer applications.
100 psi (0.7 MPa, 7.0 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7.0 bar) Maximum Air Input Pressure
Model 647648, Fuel Dispense Pump
For use in petroleum product dispense systems in accordance with the United States
Flammable and Combustible Liquids Code (NFPA 30) and the Automotive and Marine
Service Station Code (NFPA 30a). See page 4 for details.
50 psi (0.35 MPa, 3.5 bar) Maximum Fluid Working Pressure
50 psi (0.35 MPa, 3.5 bar) Maximum Air Input Pressure
For professional use only.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
Model 647648
ti14218a
313597E
EN
II 2 GD c IIC T4
This symbol on the nameplate means the prod-
uct is listed by Underwriters Laboratories Inc.
(UL Standard No. 79 for Power-Operated Pumps
for Petroleum Product Dispensing systems).
714N
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Related Manual 2 313597E Contents Related Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 To Order a New Pump: . . . . . . . . . . . . . . . . . . . . . . 3 To Order Parts for Your Existing Pump . . . . . . . . . 3 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
To Order a New Pump: 313597E 3 To Order a New Pump: NOTE: Do not configure and order a pump using only this manual. Work with your Graco distributor or follow the steps below. 1. Go to www.gracohusky.com. 2. Click on Toolbox in the gray banner near the top. 3. Click on the Husky 1050 Pump Selector, ...
Models 4 313597E Models UL Listing Details Models 647016 and 647648 are certified per UL 79 for use in pumping gasoline andgasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil, and lubricating oil. Thiscertification does not cover oil burner pumps; pumps for engine-powered automotive equ...