Hubbell 723-001 - Manual
Hubbell 723-001 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Operation
- Page 4 – Maintenance; Microphone Gain; Troubleshooting; The line may be improperly terminated. Inspect the system cable
- Page 5 – Specifications; Handset Amplifier; nominal into 33-ohm load; nominal; Speaker Amplifier; behind nameplate on the front panel)
- Page 6 – Replacement Parts
Pub. 42004-145C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
800-492-1212
Fax: 610-796-5954
V
ISIT W W W
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 723-001 Remote
Handset/Speaker Amplifier
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 723-001 Remote Handset/Speaker Amplifier is an important component of the Page/Party
®
communications system and an integral part of GAI-Tronics desktop, desk-edge, and flush-mount stations.
It has been designed to be remotely mounted within an enclosure, allowing the associated subsets to be
placed on a desktop, mounted on the side of a desk, or to be flush mounted. The Model 723-001 Remote
Handset/Speaker Amplifier is constructed of fabricated steel durable enough for even the toughest
industrial environments.
Installation
WARNING
Explosion Hazard – Substitution of components may impair suitability for
Class 1, Div. 2 usage.
CAUTION
Do not install this equipment in hazardous areas or areas other than those indicated on the equipment
approval list in the Specifications section of this manual. Such installation may cause a safety hazard
and consequent injury or property damage.
To install the remote handset/speaker amplifier, plug the amplifier into the appropriate enclosure and
tighten the four screws in the corners of the amplifier. See Figure 1 for the typical installation details.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pub. 42004-145C Model 723-001 Remote Handset/Speaker Amplifier Page: 3 of 6 \\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-145c.doc 01/04 Operation GAI-Tronics offers two types of Page/Party ® systems: Single party with one page line and one party line, and multi-part...
Pub. 42004-145C Model 723-001 Remote Handset/Speaker Amplifier Page: 4 of 6 \\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-145c.doc 01/04 Maintenance The following adjustments are accessible through the rear chassis of the remote amplifier using a small standard screw...
Pub. 42004-145C Model 723-001 Remote Handset/Speaker Amplifier Page: 5 of 6 \\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-145c.doc 01/04 Specifications Power input ..................................................................... 90-140 V ac range, 50/60 Hz, 120 ...
