Hubbell 69320-101 - Manual
Hubbell 69320-101 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – On; Connections to the Field Wiring Terminal Blocks; Cabling to the field equipment should be a twisted pair design.
- Page 4 – Switch and Jumper Settings
- Page 10 – The upgraded cards must be installed in the proper backplane slot.
- Page 12 – Installation Guidelines; WARNING; Installation Instructions; Remove the VNA from its protective carton.; Removing the VNA Card from the Card Rack; Remove power from the card rack.
- Page 13 – Frequently Asked Questions; What is the T1 Red Alarm?
- Page 14 – Specifications; Electrical
- Page 15 – The 69320-101 VNA has no field replaceable components.
Pub. 42004-693L2C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
800-492-1212
Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 69320-101
Voice Network Adapter
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may
not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 69320-101 Voice Network Adapter (VNA) allows voice communication between
interconnected SmartSeries systems. It is installed in a 10457 Series Card Rack (Card Rack) and is
controlled by a 69254 Series or 69440 Series Master Control Unit (MCU) installed in that same card rack.
The VNA is designed exclusively for use in a SmartSeries system, and is not intended for use with other
types of equipment.
Description of Major Components
Front Panel LEDs
The following table describes the LEDs mounted on the VNA’s front panel:
LED Status
Description
ON LINE
(green)
On
The MCU is running and is configured to recognize the VNA.
Off
The VNA is not receiving power from the card rack or the MCU is not
properly configured to recognize the VNA.
VNA FLT
(red)
On
The MCU has lost communication with the VNA. The MCU and the VNA
continuously update handshaking information. If the VNA is not updating that
information as the MCU expects, then the MCU turns on this LED.
Off
The “On” condition is not occurring.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pub. 42004-693L2C Model 69320-101 Voice Network Adapter Page: 3 of 15 \\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-693l2c.doc 04/06 LED Status Description LOS/RCL (red) On The VNA is not receiving a T1 signal (Loss of Signal or Receive Carrier Loss), and does not de...
Pub. 42004-693L2C Model 69320-101 Voice Network Adapter Page: 4 of 15 \\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-693l2c.doc 04/06 Switch and Jumper Settings Overview Several switch and jumper settings are required for proper operation of the VNA Card. The followin...
Pub. 42004-693L2C Model 69320-101 Voice Network Adapter Page: 10 of 15 \\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-693l2c.doc 04/06 Changing to a 69320-101 VNA from a 69266-001 T1 Interface N OTES : 1. The 69320-101 VNA is not electrically compatible with its prede...
