Page 2 - HUAWEI HG622 Home Gateway; User Guide
HUAWEI HG622 Home Gateway V100R001 User Guide Issue 02 Date 2010-06-25 Part Number 202193 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Hu...
Page 3 - Trademarks and Permissions; Notice
Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Te...
Page 4 - Contents
Contents 1 Warnings and Precautions ....................................................................... 1 2 Connecting the Cables and Powering On................................................ 4 2.1 Simple Connection .................................................................................
Page 6 - Warnings and Precautions; Basic Requirements
1 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements z During storage, transportat...
Page 8 - Maintenance
Maintenance z If the device is not used for a long time, power it off, and then remove all the cables connected to it. z If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop using the device immediately, power it off, remove all the cables connected to ...
Page 9 - Simple Connection
2 Connecting the Cables and Powering On 2.1 Simple Connection If your telephone line is used for the broadband network access only and if you do not need to use the cables. a telephone, take the following figure as a reference for connecting 1 2 3 DSL LAN4 LAN3 LAN2 LAN1 RESET POWER 1. Telephone jac...
Page 10 - Connecting One Telephone
2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables. 1 4 5 PHONE MODEM LINE 2 3 DSL LAN4 LAN3 LAN2 LAN1 RESET POWER 1. Telephone jack on the wall 2. Splitter 3...
Page 11 - Connecting Multiple Telephones
2.3 Connecting Multiple Telephones If your telephone line is used for the broadband network access, telephone connections, and fax connections, take the following figure as a reference for connecting the cables. 1 4 5 PHONE MODEM LINE 2 3 DSL LAN4 LAN3 LAN2 LAN1 RESET POWER 1 6 7 7 8 3 1. Telephone ...
Page 12 - Powering On; Setting the Internet Access Parameters; Configuring the HSPA uplink
2.4 Powering On To power on the HG622, press the ON/OFF button on the side panel of the HG622. After you power on the HG622, the DSL indicator blinks (for less than three minutes), which indicates that the HG622 is being activated. Later, the DSL indicator turns solid on. The POWER indicator is also...
Page 13 - Configuring the DSL uplink; Using the Embedded PPP Dial-Up Software on the HG622
Step 1 Click Advanced > PIN in the navigation tree to display the PIN Page. Step 2 Enter the original PIN number in the PIN text box. Step 3 Click the Submit button to finish the settings on the PIN Page. Use the default values for the other parameters. In general, they do not need to be configur...
Page 14 - Using the PPP Dial-Up Software on Your Computer
Step 4 Set LAN parameters. 1. In the navigation tree, choose Basic > LAN . 2. Set the IP address and Subnet mask of the LAN connection. 3. Select Enable for DHCP serve r, and then set the corresponding parameters. 4. Click Submit . After you complete the preceding settings, you can surf the Inter...
Page 15 - Setting Up a Wireless Connection Through the WPS Button
You need to perform the preceding operations only once for creating a network connection. After the network connection is created, to access the network, double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box. 4 Configuring the Wireless Network Connectio...
Page 16 - Setting Up a Wireless Connection Manually
The WPS indicator of the HG622 becomes on from the blinking state, indicating that the HG622 is connected to your PC through the WLAN. This state lasts 300s. Then the WPS indicator turns off. If the WPS indicator does not blink, it indicates that the WPS function cannot be enabled. Note that the WPS...
Page 17 - Basic Configuration; Changing the Administrator Password
5. Click OK to close the dialog box, and then close the Computer Management window. Step 3 Configure the wireless network connection on your computer. 1. Choose Start > All Programs > Accessories > Communications > Network Connections . 2. In the Network Connections window, right-click W...
Page 20 - Restoring Default Settings; FAQs
After files are downloaded, you can view file downloading records on the Download History tab. 5.6 Restoring Default Settings You can quickly restore the default settings of the HG622 by pressing the RESET button on the rear panel. To restore the default settings, press and hold the RESET button for...
Page 24 - Appendix; Indicators
7 Appendix 7.1 Indicators POWER DSL INTERNET WLAN WPS LAN1 LAN2 LAN3 LAN4 USB 2 3 4 5 6 7 8 9 10 1 No. Indicator Status Description On The HG622 is powered on. 1 POWER Off The HG622 is powered off. On The HG622 is activated. Blinking The HG622 is being activated. 2 DSL Off The HG622 is powered off. ...
Page 26 - Interfaces and Buttons
7.2 Interfaces and Buttons DSL LAN4 LAN3 LAN2 LAN1 RESET POWER ON/OFF WP S WL A N 1 2 3 4 5 6 7 9 8 10 11 No. Interface or Button Description 1 DSL Used to connect HG622 to the MODEM interface on the splitter or to the telephone jack on the wall. 2-5 LAN1–LAN4 Used to connect Ethernet devices, such ...
