Honeywell CHW3610W10001 - User Manual

3 For help, go to lyric.honeywell.com Placement The detector and (if used) the optional cable sensor should be placed where leaks are likely to occur. For the most part, this will be on the bottom level of your home or business, near water sources, or anywhere you think leaks are possible. Locations...

For help, go to lyric.honeywell.com 4 Preparing for installation To install this product, you will need:• The Lyric app• Bluetooth connectivity turned on for your Android or Apple mobile device • Your Wi-Fi® password Download and install the app 1 Go to the App Store or Google Play and search for Ho...

5 For help, go to lyric.honeywell.com Power up the detector It is important to install the app before you install the batteries. After the batteries are installed, the detector will begin attempting to pair with the app immediately. If you are installing multiple detectors, the easiest way to do it ...

For help, go to lyric.honeywell.com 6 Pair and name your detector 1 Under Add New Device, select Lyric Water Leak and Freeze Detector . Note: Make sure Bluetooth is enabled on your mobile device. 2 Provide a location for your detector. Press NEXT . 3 The detector will now pair with the app. Note: If...

7 For help, go to lyric.honeywell.com Connect to Wi-Fi 1 Choose your network from the list. Press NEXT . 2 Enter your Wi-Fi password, if necessary. Press NEXT . 3 When connected to Wi-Fi, the LED will turn solid green for 5 minutes, then turn off to preserve battery life. Note: After you connect the...

For help, go to lyric.honeywell.com 10 Configure the detector Selections you make here will determine how often the detector will send temperature and humidity readings to the app. They will also determine when and how you receive notifications for temperature or humidity alerts. No matter what sett...

11 For help, go to lyric.honeywell.com Select alert recipients Choose the people you want notified when there is an alert condition. You can choose e-mail, text message, or both. 1 Press the text box to add a contact. 2 Select the contact from your address book. 3 If you want other people to receive...

For help, go to lyric.honeywell.com 12 App dashboard The app dashboard displays historical information about temperature and humidity readings taken at the detector locations. It displays an alarm screen when a leak is detected. Temperature/Humidity trend Here is an example of the dashboard showing ...

13 For help, go to lyric.honeywell.com Leak detected If a leak is detected, the detector will sound a loud alarm. IMPORTANT It can take up to one minute for the alarm to sound after water is detected. You can silence the alarm from the app by pressing the Mute button, then start the alarm again by p...

For help, go to lyric.honeywell.com 14 Other alerts The app will alert you if temperatures drop below freezing or are otherwise above or below your settings; if humidity is above or below your settings, or if the detector loses its Internet connection. Use the app to find out more information about ...

15 For help, go to lyric.honeywell.com Using the Lyric Awareness app Using the Lyric Awareness app, you have full remote connectivity to your detector. To see a snapshot of alerts and activity, press the message icon. Rename a detector You might want to rename your detector if you add other detector...

For help, go to lyric.honeywell.com 16 Remove a detector If you need to remove a detector from your account, it is easy to do using the app. 1 Press the side menu button. 2 Press Leak Detector . 3 Press DELETE DEVICE . 4 Press YES to confirm the deletion or NO to cancel it.

17 For help, go to lyric.honeywell.com Change alert settings You can change how the detector and app handle alerts at any time. 1 Press the side menu button. 2 Press Alerts and Notifications . 3 Press High/Low Temperature to change temperature alert settings. 4 Press High/Low Humidity to change humi...

For help, go to lyric.honeywell.com 18 Add alert recipients You can change the detector’s alert recipients at any time. 1 Press the side menu button. 2 Press Alerts and Notifications . 3 Press Email Contacts . 4 To add recipients, press the text box and add an email address, or press the button to o...

19 For help, go to lyric.honeywell.com Remove alert recipients You can change the detector’s alert recipients at any time. 1 Press the side menu button. 2 Press Alerts and Notifications . 3 Press Email Contacts . 4 Press EDIT . 5 Press the button next to the recipient you want to remove. 6 Press Del...

For help, go to lyric.honeywell.com 20 Reset Use one end of a paperclip to press and hold into the reset hole for 5 seconds to reset Wi-Fi, detector settings, and to re-start Bluetooth pairing. The LED will blink blue. Press and hold the paperclip into the reset hole for 15 seconds to restore factor...

21 For help, go to lyric.honeywell.com Maintenance Your detector requires no maintenance and the battery life should be approximately three years if using the correct batteries. Battery life might be shorter due to a number of factors (e.g., extreme cold or heat, multiple cable sensors, alert activi...

For help, go to lyric.honeywell.com 22 Frequently Asked Questions Is there a preferred install height? The detector can be on the floor or hang at any height. The length of the supplied cable sensor is 4 feet (or 1.2 meters). You can attach additional cable sensors for additional coverage – up to 12...

For help, go to lyric.honeywell.com 26 Specifications Battery: 3 AA Alkaline (included) Dimensions: 3.07 in. square x 1.26 in. thick (78 mm square x 32 mm thick) Weight: 0.33 lbs (150g) Ingress Protection Rating: IP44 Buzzer Alarm: 100 dBA Water Sensing Rate: 1 time per minute Temperature/Humidity S...

27 For help, go to lyric.honeywell.com FCC Regulations § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including int...

For help, go to lyric.honeywell.com 28 IC Regulations ICES-003 Issue 5 CAN ICES-3(B)/ NMB-3(B) RSS-210 Annex 9: A 9.4 The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission...

29 For help, go to lyric.honeywell.com Réglementation IC NMB-003 5 édition CAN ICES-3(B)/NMB-3(B) RSS-210 Annexe 9 : A 9.4 L’appareil pourrait cesser d’émettre automatiquement en cas d’absence d’informations à transmettre, ou de panne. Il convient cependant de souligner que cela n’est pas destiné à ...

For help, go to lyric.honeywell.com 30 Warranty 2-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in workmanship or materials, under normal use and service, for a period of two (2) years from the date of first purchase by the original purchaser. If a...

Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 lyric.honeywell.com Wi-Fi® is a registered trademark of Wi-Fi Alliance® The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance® ® U.S. Registered Trademark © 2015 Honeywell Int...