HoMedics CM50B - User Manual

Page 2 - IMPORTANT SAFETY INSTRUCTIONS:; DANGER; WARNING

2 IMPORTANT SAFETY INSTRUCTIONS: WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING DANGER – TO REDUCE THE RISK OF ELECTRIC SHOCK: • Always unplug the appliance from the...

Page 3 - SAVE THESE INSTRUCTIONS; CAUTION

3 • Keep cord away from heated surfaces.• NEVER drop or insert any object into any opening.• DO NOT operate where aerosol (spray) products are being used or where oxygen is being administered. • Always place the humidifier on a firm, flat, level surface.• Please hold the water tank firmly with both ...

Page 4 - Operation and Maintenance

4 Operation and Maintenance • Do not repair or adjust the unit. Servicing must be performed by professional or qualified personnel. • Do not operate any appliance with an aging, knotted or damaged cord or plug, the replacement must be performed by the manufacturer, service center or qualified profes...

Page 5 - Unique Features and Specifications

5 Unique Features and Specifications Ultrasonic Technology This humidifier uses ultrasonic high frequency technology to convert the water into 1-5 million super particles that are dispersed into the air evenly. These particles then combine with the ions generated by the humidifier to moisten the air...

Page 6 - Cool Mist Ultrasonic Humidifier

Page 8 - How To Fill

8 1. Remove the oscillation nozzle. To remove the nozzle, turn the ring on the bottom of the nozzle to the left until the Locator icons on the head, ring and base all line up and are aligned with the UNLOCK ( ) position. Lift up to remove the nozzle and set aside. 2. Raise the flip-up handle on the ...

Page 10 - About White Dust

1 0 About White Dust Use of high-mineral content hard water will cause a white mineral residue to accumulate on room surfaces near the humidifier. The mineral residue is commonly called "white dust". The higher the mineral content (the harder your water is), the greater the potential for whi...

Page 11 - Cleaning and Care

1 1 5. Place the tank back on the base.6. Place the oscillating nozzle back on to the unit and lock into place by turning the ring to the right until the locator icon is aligned with the LOCK position. (Fig.10) Cleaning and Care CAUTION: Before cleaning the unit, turn power off and unplug unit from ...

Page 12 - Troubleshooting

1 2 Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION Power Light is off • Unit is not plugged in • No power at unit • Plug unit in • Press the POWER button to turn the power on • Check circuits, fuses, try a different outlet Peculiar Odor • If new unit • If unit is in use, the odor may be a dirty tan...

HoMedics CM50B - User Manual

Table of Contents:

Summary

Other HoMedics Humidifiers Models