Hitachi vl-21a - Manual - manualsarea.com

Page 2 - Table of Contents

Table of Contents 1. Document History 3 2. Specifications 3 2.1 Lens 3 3. Measurement Specifications 5 4. Environment Condition and Test 5 4.1 High Temperature Storage Test 5 4.2 Low Temperature Storage Test 5 5. Interface 5 5.1 Pin Assignment 5 5.2 J204-10 Pin Connector 5 5.3 Line in Pulse (Ex, FV)...

Page 3 - AUTO

1. Document History Revision Issue Date Reason CN# Rev A 07-21-11 Initial Release 11-00 2. Specifications Signal System NTSC Scanning System 2 : 1 Interlace Scanning Frequency (H) 15.734KHz Scanning Frequency (V) 59.94Hz Image Sensor 1/4” IT CCD Total Pixels 811 (H) x 508 (V) 410K Effective Pixels 7...

Page 6 - Lens Test Condition

Page 8 - ) OSD Display Position

8. Appendix 1 8.1 OSD (On Screen Display) 1) OSD Display Position The OSD (On Screen Display) is as follows: 2) Description 8

Page 10 - Each section has INITIAL and EXIT.; MENU; Sets camera zoom and focus; FOCUS; AUTO Focuses automatically

8.2. Menus and Operations 8.2.1. MAIN MENU  The main menu is shown below. 9 functions can be selected. Many of these sections have subsections as described in the pro-ceeding pages.  Each section has INITIAL and EXIT.  INITIAL: Resets the function back to the factory default setting for that p...

Page 14 - UPPER

8.2.7.1. MOTION  When there is movement of the subject on the screen there will be an alarm, or the user will be informed through com-munications on “MD” will display on the screen.  NOTE: There is a signal every time there is move-ment by the subject. If motion is detected, MD (Motion Detector)...

Page 15 - GENERAL

8.2.8. GENERAL  General camera settings. GENERAL CAM ID ID DISPLAY OFF CAM TITLE OFF LANGUAGE ENG PROTOCOL DEF BAUDRATE 9600 VERSION VER 1.1N INITIAL OFF EXIT CAM ID  Displays the camera’s ID from 0 - 255. LANGUAGE  Displays the currently set language. PROTOCOL  DEFAULT, P/D (Pelco D) P/P (P...

Page 22 - More than 480 TV Lines (High Resolution)

TEST CONDITIONS Refer to “Measurement Conditions” MEASURING SYSTEM System 1 PROCEDURE: 9.2.4. Horizontal Resolution 1. Shoot the resolution chart and zoom WIDE or TELE to fit the chart to the monitor. 2. Adjust the brightness and contrast of the B/W monitor so that each step of the gray scale portio...

Page 23 - Distributed; Hitachi; Industrial

10. Contact Information For technical assistance with this product, please contact the supplier from whom the product was purchased. Distributed by: Hitachi Kokusai Electric America Ltd. Industrial Video Systems 150 Crossways Park Drive Woodbury, NY 11...

Hitachi vl-21a - Manual

Table of Contents:

Summary

Other Hitachi Models