Hitachi SJ-DG - Manual
Hitachi SJ-DG – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Revision History Table
- Page 3 – SAFETY PRECAUTIONS; Notes are described in this manual in “Note”,; Precaution; . Carefully read the contents and follow them exactly.; CAUTION; WARNING
- Page 4 – Wiring work shall be carried out by electrical experts; Otherwise, there is a danger of electric shock.; Never modify the unit.; Otherwise, there is a danger of electric shock and/or injury.; Be sure to fasten the screws not to loose.; Otherwise, there is a danger of connecting error.
- Page 7 – CHAPTER 1 INTRODUCTION; INSPECTION UPON UNPACKING; If you discover any problms, contact your sales agent immediately.; INQUIRY OF THE PRODUCT AND WARRANTY FOR THE PRODUCT; ordered or the nearest Hitachi Distributor.; OUTLINE OF THE PRODUCT
- Page 8 – CHAPTER 2 INSTALLATION METHOD OF PRINTED BOARD; INSTALLATION METHOD OF PRINTED BOARD; Option board 1; Figure 2-1 Installation of option printed board
- Page 9 – CHAPTER 3 WIRING, CONNECTING; TERMINAL ASSIGNMENT OF DIGITAL INPUT OPTION BOARD; Figure 3-1a Terminal assignment
- Page 10 – CHAPTER 3 WIRING, CONNECTION; CONNECTION TO PROGRAMABLE CONTROLLER
- Page 11 – SPECIFICATION OF TERMINAL; Table 3-3 Specification of terminal; APPLICABLE WIRING
- Page 12 – CHAPTER 4 SETTING; Figure 4-1 Position of switch; POSITION OF SETTING SWITCH; Table 4-2 Initial setting condition
- Page 13 – Table 4-4 Table of input mode; PAC
- Page 14 – PRECAUTIONS AT SETTING OF SWITCH; power on of inverter.
- Page 15 – CHAPTER 5 FUNCTION
- Page 17 – Setting of dip switch TYPE; TWO DIVIDING BCD INPUT; Refer to 5.3 ”DATA INPUT TIMING” for signal input timing.
- Page 18 – CLASSIFICATION CODE; Table 5.2 shows table of classification; DATA INPUT TIMING; Classification code
- Page 19 – NOTICE AT DATA INPUT; Figure 5.3.2 Timing chart of two dividing data input
- Page 20 – BCD; max frequency Hz
After reading this manual, keep it handy for future reference
INSTRUCTION MANUAL
Thank you for purchase of “HITACHI INVERTER”. This manual
explains about treatment of “SJ-DG (digital input option)”. By reading this
manual and an instruction manual of inverter
use practically for
installation, maintenance, and inspection. After reading this manual, keep
it handy for future reference
Make sure to reach this manual to the end user.
Table of Contents
Chapter1 Introduction
1
Chapter2 Installation method of printed board
2
Chapter3 Wiring Connecting
4
Chapter4 Setting
6
Chapter5 Function
7
SJ300/L300P SERIES
SJ-DG
(DIGITAL INPUT OPTION)
N B 6 1 7 X
HITACHI INVERTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Request Thank you for purchase of “HITACHI INVERTER”. This manual explains about handling of “SJ-DG (digital input option)”. This instruction manual explains about treatment and maintenance of “SJ-DG”. Before using the product, carefully read this manual with the instruction manual of inverter, and ...
SAFETY PRECAUTIONS ! SAFETY PRECAUTIONS Carefully read this manual and all of the warning labels attached to the inverter before installing, operating, maintaining, or inspecting it. Safety precautions are classified into “Warning” and “Caution” in this manual. : Indicates a potentially hazardous si...
SAFETY PRECAUTIONS ! ! WARNING Wiring: • Wiring work shall be carried out by electrical experts Otherwise, there is a danger of electric shock, fire and/or damage of product. • Implement wiring after checking that the power supply is off. Otherwise, there is a danger of electric shock and/or fire. O...
