Page 2 - Important Safety Instructions; To the CATV system installer: This reminder is provided; NOTE; READ BEFORE OPERATING EQUIPMENT; are provided for your safety. If the provided plug does not fit; Power source
2 Important Safety Instructions To the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820- 44 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding sy...
Page 3 - “SCREEN DAMAGES”; Modifications; or
3 Important Safety Instructions Warning To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The plasma television should not be exposed to dripping or splashing and objects filled with liquids, such as vases, should • not be placed on the television. Thi...
Page 4 - THE ISSUE; the safe installation and use of your flat panel display.; IF YOU DECIDE TO WALL; Use a mount that has been recommended by the display manufacturer
4 Important Safety Instructions Congratulations on your purchase! As you enjoy your new product, please keep these safety tips on mind: THE ISSUE The home theater entertainment experience is a growing trend and larger flat • displays are popular purchases. However, flat panel displays are not always...
Page 5 - FIRST TIME USE; Energy Saving Features; Energy Savings Initial Settings:
FIRST TIME USE 5 Energy Saving Features Congratulations on purchasing a ENERGY STAR® qualifying product. This Hitachi product as shipped from the factory meets the United States Environmental Protection Agency (EPA) requirements established for both “On” and “Standby” Operation. Certain features and...
Page 6 - ccessories; designed for a maximum tilting angle of 45 degrees from vertical.; REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT; resulting in leakage.; CAUTION; For optional accessories, please access our web site at:
6 A ccessories Check to make sure you have the following accessories before disposing of the packing material. Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate • ventilation for the electronics or proper support for the front glass panel. This plasma t...
Page 7 - Do not block the ventilation holes of the Plasma; How to secure Clamp #1; How To Install Your New Hitachi Plasma Television; used to reduce the reflection.; in a stable and flat surface.; NOTES
FIRST TIME USE 7 Turning Angle The maximum turning angle is 30° (left and right). Do not place any objects in the path of the television when using the power swivel feature. Do not block the ventilation holes of the Plasma • Television. Blocking the ventilation holes might cause fire or defect. In c...
Page 8 - WALL MOUNTING SETUP; STEP (1) : REMOVE THE TABLE TOP STAND FROM THE PLASMA TELEVISION; the Wall Mount Bracket and the Plasma Television. This length is; very important
8 How To Install Your New Hitachi Plasma Television WALL MOUNTING SETUP STEP (1) : REMOVE THE TABLE TOP STAND FROM THE PLASMA TELEVISION Please remove the 4 screws shown below in order to separate the TV from the Table Top Stand. Now the Table Top Stand can be separated from the TV. Useful dimension...
Page 9 - Side Panel Jacks & Controls; In order to receive written notification, please complete and; Indicating; FRONT VIEW; Your HITACHI Plasma TV will appear to be turned; Indicating Lamp
FIRST TIME USE 9 Side Panel Jacks & Controls will notify you if a software upgrade is required for your TV. In order to receive written notification, please complete and return your warranty card. POWER light indicator To turn the TV ON, press the Power switch ( ). A red stand-by indicator lamp ...
Page 10 - Rear Panel Jacks; Antenna Input; uncompressed high-definition video and multichannel; IR Out; through; Power Swivel Connector
10 Rear Panel Jacks Antenna Input To switch between Cable and Air input, go to the Channel Manager option to change the signal source CABLE or AIR (see page 38). Component: Y-PBPR and Audio Inputs INPUTS 1 and 2 provide Y-PBPR and Audio jacks for connecting equipment with this capability, such as a ...
Page 11 - uick Reference Remote Control Buttons and Functions; programming of the Remote Control.; the remote control directly at the sensor for best results.
FIRST TIME USE 11 Q uick Reference Remote Control Buttons and Functions In addition to controlling all of the functions on your Hitachi Plasma TV, the new remote control is designed to operate different types of devices, such as, DVD Players, CBL (Cable Boxes), set-top-boxes, satellite receivers, an...
Page 12 - Quick Setup Guide; Perform the following steps to quickly setup your new; When both VHF and UHF antennas are connected; The Indicating Lamp will light Red (Standby mode) and; CONNECT YOUR NEW HITACHI PLASMA TV TO THE POWER SOURCE; Press the POWER button on the Remote Control or the; FOLLOW THE TV SETUP WIZARD INSTRUCTIONS ON NEXT PAGE.; If the Power Switch is set to OFF, the Power Button
12 Quick Setup Guide Perform the following steps to quickly setup your new Hitachi Plasma Television Set. 1. ANTENNA CONNECTION Unless your Plasma Television is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. How...
Page 13 - find the channels available in your area.; SEL; RETAIL Mode is intended for showroom or shop use; Do you want the TV to find all of the channels; Yes No; Yes; TV Setup Wizard
FIRST TIME USE 13 the TV Guide On Screen TM Setup screen will appear (refer to page 37). Press the 2. q CURSOR to move to the next window to select the source. Source: t Air u Please connect the antenna or cable to the input labeled “Air/Cable”. Press the 3. u CURSOR to select Air, Cable(1) or Cable...
Page 14 - Side Panel Connections; Use the side Audio input jacks for the audio connection).; Before Operating External Video Sources; Example: Selecting the; A) Connecting HDMI signal; B) Connecting DVI signal
14 Side Panel Connections The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire. The SIDE panel HD...
Page 15 - Rear Panel Connections; Cables are optional, except when specified.; TIPS ON REAR PANEL CONNECTIONS; components R-Y output to the TV’s PR input.
FIRST TIME USE 15 Rear Panel Connections Cables are optional, except when specified. NOTE TIPS ON REAR PANEL CONNECTIONS COMPONENT Y-PBPR (Input 1 & 2) or HDMI (1 & 2) connections are provided for high performance DVD players, VCRs etc. that have ♦ this feature. Use these connections in plac...
Page 16 - back will be abnormal if the connection is loose.
16 Rear Panel Connections Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played • back will be abnormal if the connection is loose. Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white t...
Page 17 - CONNECTING AN EQUIPMENT SOURCE WITH HDMI; input as shown on the Rear panel right below figure.; HDMI Input; CONNECTING AN EXTERNAL AUDIO AMPLIFIER; audio amplifier, connect the system as shown on the right. The
FIRST TIME USE 17 Rear Panel Connections CONNECTING AN EQUIPMENT SOURCE WITH HDMI OR DVI CAPABILITY TO HDMI 1, HDMI 2 Connect the HDMI or DVI to HDMI connection cable from the 1. output of the HDTV set top box or DVD player to the HDMI input as shown on the Rear panel right below figure. With DVI ou...
Page 18 - The Remote Control; POWER button; first for channels 1 to 9, or simply press the single digit channel; Press the SELECT button to set the option.
18 The Remote Control POWER button Press this button to turn the TV set on or off when the remote is in TV mode. DEVICE buttons In addition to controlling all the functions on your HITACHI Plasma TV, the new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, s...
Page 19 - How to Use the Remote to Control your TV; Press the INFO button again or the EXIT button to
19 REMO TE CONTR OL How to Use the Remote to Control your TV (-) DASH /Sleep Button Use the (-) DASH button with the CHANNEL SELECTOR buttons to enter Digital Channels that have subchannel numbers indicated by (-) DASH (example 15-1). For TV mode only, press to Set the Sleep Timer from 30 minutes to...
Page 20 - edges of the display area in order to fill it.; ASPECT button; to fill the screen please refer to Auto Aspect function on page 34.
20 How to Use the Remote to Control your TV 4:3 STANDARD Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for only 15% of your total viewing time ...
Page 21 - For automatic DAY/NIGHT picture mode settings,; For the Record button there is a feature for safety
21 REMO TE CONTR OL How to Use the Remote to Control your TV E.SAVE (ENERGY SAVE) button Use this button to choose power consumption reduction settings based on 3 levels (MIN, MEDIUM, MAX). PICTURE-IN-PICTURE (PIP) button See separate section on page 23 for a more detail description. RECORD button P...
Page 22 - Photo Input; Next; ROTATE; Rotate; SLIDESHOW; JPEG format should conform with DCF Standard
22 Photo Input This feature is useful for viewing digital still pictures from the MMC/SD memory cards using the Photo Input slot in the side panel of your Hitachi Plasma Television. Press the INPUT button to cycle through the INPUTS selections 1. until the PHOTO INPUT is selected. Press the SELECT b...
Page 23 - Press the CURSOR PAD ( or; PIP button
23 REMO TE CONTR OL Picture-In Picture (PIP) Your HITACHI Plasma TV incorporates one Tuner technology designed for improved viewing enjoyment This feature allows you to view Digital Channels and Video inputs on both the main picture and sub picture simultaneously with separate control. Analog channe...
Page 24 - SPLIT FREEZE; STROBE FREZZE
24 SPLIT FREEZE • Press the PAUSE button to freeze the picture you are currently viewing (only the right sub-picture will freeze). Press the EXIT button to return to normal viewing. Main Picture Sub Picture STROBE FREZZE • Press the PAUSE button to freeze three frames of the picture you are currentl...
Page 25 - OPERATING THE PRECODED FUNCTIONS FOR YOUR AV EQUIPMENT.; confirm proper setup.; SETUP EXAMPLE (Hitachi Cable Box with precode 0003); The indicator light will flash 3 times if the code was accepted.; How to Use the Remote to Control your AV Equipment; preprogrammed into the remote.; Remote Control Backlight Feature
25 REMO TE CONTR OL OPERATING THE PRECODED FUNCTIONS FOR YOUR AV EQUIPMENT. The new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, satellite receivers, DVD players, and other audio/video equipment. You must first program the remote to match the remote syst...
Page 26 - MY CABLE BOX CODE IS:; EXCLUSIVE TV buttons; PRECODED CABLE BOX buttons; Satellite Receiver for operation of the buttons
26 How to Use the Remote to Control your AV Equipment MY CABLE BOX CODE IS: _____________________ Refer to instruction manual of the Cable Box for operation of the buttons exclusively for the Cable Box. NOTE PRECODED SET-TOP BOX/SATELLITE buttons These buttons transmit the chosen precoded Set-Top- B...
Page 27 - MY DVD PLAYER CODE IS:; PRECODED DVD buttons
27 REMO TE CONTR OL How to Use the Remote to Control your AV Equipment How to Use the Remote to Control your AV Equipment MY DVD PLAYER CODE IS: _____________________ Refer to instruction manual of the DVD Player for operation of the buttons exclusively for the DVD Player. NOTE MY VCR/PVR CODE IS: _...
Page 28 - AVR Device; Refer to the instruction manual of the AVR for; PRECODED AVR buttons; These buttons transmit the chosen precoded AVR; These buttons are for operating the TV :
28 How to Use the Remote to Control your AV Equipment AVR Device Button MY AUDIO/VIDEO RECEIVER (AVR) CODE IS: ______________________ Refer to the instruction manual of the AVR for operation of the buttons exclusively for the AVR. PRECODED AVR buttons These buttons transmit the chosen precoded AVR c...
Page 29 - Remote Control Codes
29 REMO TE CONTR OL Remote Control Codes CABLE Brand CODES A-MARK 0008,0144 ABC 0237,0003,0008 ACCUPHASE 0003 ACORN 0237 ACTION 0237 ACTIVE 0237 ADB 2092,2586 ARCHER 0237 BCC 0276 BRITISH TELECOM 0003 CENTURY 0008 DIGEO 1187,2187 DIGI 0637 DIRECTOR 0476 DUMONT 0637 FOSGATE 0276 GE 0144 GENERAL INSTR...
Page 31 - Video; This part of the screen shows which
31 ON-SCREEN DISPLA Y On-Screen Display Press MENU on the remote control to display the different 1. features on your Hitachi Plasma TV. Use the CURSOR PAD (buttons, 2. , , and ) and highlight a different feature of the On-Screen Display menu. Press the SELECT button to select. Press EXIT on the rem...
Page 32 - The clock settings will be; available for Digital channels.; available when the Table Top
32 Adjust the intensity of high frequencies. Adjust the intensity of low frequencies. Adjust the balance. Select Surround settings (Off, Normal, Wide) Select Bass Boost option ON or OFF. Select between three Audio Sources (ST, Mono, SAP). Select internal or external speakers. Eliminates the noise be...
Page 33 - Use this function to adjust flesh tones so they appear natural.; cinematic film like image.
33 ON-SCREEN DISPLA Y Video Select VIDEO to adjust picture settings to your preference. You can independently customize each of the video inputs to increase viewing performance and pleasure depending upon the video program being viewed. If RESET is selected, only the selected input will reset to ini...
Page 34 - Mode; Aspect; Vertical Position; after the TV is turned off.; second, instead of 30 frames or 60 fields like video. When film is; Auto Aspect; signal to fill the screen.
34 Mode Manually select the Aspect Ratio. There are different aspect ratio available according with the signal in use. See page 63. Aspect Auto Aspect : OnMode : 16:9 Standard1Vertical Position : 0 Video Move SEL Return Air Vertical Position This function allows you to move the picture up and down w...
Page 35 - SMOOTH Motion Demonstration; automatically film based source material.; SPLIT Mode Demonstration; Smooth; SIDE BY SIDE Mode Demonstration; Smooth Original; If you activate one of the two modes for Smooth
35 ON-SCREEN DISPLA Y Video SMOOTH Motion Demonstration This Hitachi new and exclusive state of the art feature makes an extremely smooth and beautiful picture by applying an advanced interpolation processing technology when detecting and receiving automatically film based source material. Since the...
Page 36 - Audio; selected and adjusted in the same manner.; connected to an amplifier/receiver with a
36 Audio Select AUDIO to adjust the sound to your preference. + VideoAudioTV Guide On ScreenChannel ManagerLocksTimersSetup Move SEL Select Power Swivel OR Perfect Volume Auto Noise Cancel Internal Speakers Audio Source Bass Boost Surround Balance Bass Treble Audio Move SEL Select Off Off On Stereo ...
Page 37 - TV Guide On Screen; To Setup the TV Guide On Screen; Pressing the GUIDE button also allows you immediate; Please select which service(s) you would like your TV Guide; Are the above settings correct ?; *If all setting are correct please select Next to finish.; System please refer to the included TV Guide On
37 ON-SCREEN DISPLA Y TV Guide On Screen The TV Guide On Screen TM system is a built-in feature that provides a channel lineup and program listings in your area. Once the setup process is complete, the program listings are automatically updated several times a day. To Setup the TV Guide On Screen TM...
Page 38 - Channel Manager; Signal Meter; when watching analog channels.; Auto Channel Scan; Channel List; IMPORTANT NOTICE
38 Channel Manager Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List. Press CURSOR PAD 1. , to highlight functions. Press the SELECT button or CURSOR PAD 2. to select. + VideoAudioTV Guide On ScreenChannel ManagerLocksTimersSetup Move ...
Page 39 - Locks
39 ON-SCREEN DISPLA Y Locks This function will block out the picture and sound of the selected channel or video input. + VideoAudioTV Guide On ScreenChannel ManagerLocksTimersSetup Move SEL Select Power Swivel The code to enter the Locks feature is a four digit access code number. The factory preset...
Page 40 - Motion Picture Ratings Table; programs and weather.; TV Parental Guide Ratings Table; Canadian Ratings English Table
40 Locks Motion Picture Ratings Table NOT RATED Contains no rating. Not Rated (NR) and Not Applicable (NA) programs. Movie has not been rated or ratings do not apply.G General audiences. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents ...
Page 41 - Canadian Ratings French Chart; PG
41 ON-SCREEN DISPLA Y Locks Canadian Ratings French Chart G General - Programming intended for audiences of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately with humor or caricature or in an unrealistic manner. 8 ans+ 8 + General - Not recommended for y...
Page 42 - Timers; Set The Clock; When AUTOMATICALLY ADJUST CLOCK FOR; Set Sleep Timer; The Sleep Timer info will show for 1 minute before
42 Timers Select TIMERS to set your Clock, Sleep Timer and Day/Night Timer. + VideoAudioTV Guide On ScreenChannel ManagerLocksTimersSetup Move SEL Select Power Swivel OR Set Day/Night Timer Set Sleep Timer Set The Clock Timers Move SEL Select Not Set 0 : 00 - - : - - AM PST Use the CURSOR buttons 1....
Page 43 - Setup
43 ON-SCREEN DISPLA Y Setup Set The Screen Saver Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non- moving) patterns can cause permanent damage to the Plasma Television. Use the SCREEN SAVER feature to minimize uneven aging ...
Page 44 - Auto TV Off; ▲ or ▼ to highlight the video; INPUT 2 Auto Link; ▲ or ▼ to highlight the; Digital Captions
44 Setup NOTE Auto Sync. Saving Use this feature to turn power off automatically when a video input signal is not detected for 30 seconds. This feature works only for INPUT 1, 2, 3 and HDMI 1, 2, 3. Auto TV Off Use this feature to turn power off automatically when no operation of TV is detected for ...
Page 45 - Set The IR Out; Set The Power Indicator; Reset The Software; ▲ or ▼ to highlight
45 ON-SCREEN DISPLA Y Setup Set The IR Out This feature allows the customer to hide and operate external home theater components (VCR, DVD player or cable box) by using their original remote control through the Hitachi Plasma TV set with the provided IR Out cable. Also called IR Passthru, this featu...
Page 46 - CURSOR PAD; CURSOR PAD; ► to rotate the TV to the right.; CURSOR PAD; ◄ to rotate the TV to the left.; CURSOR PAD; The Power Swivel has a maximum turning angle of
46 Power Swivel This feature controls the motorized stand. It allows the customer to turn the Plasma Television left or right using the remote control. This feature is only available when the Table Top Stand is connected. + VideoAudioTV Guide On ScreenChannel ManagerLocksTimersSetup Move SEL Select ...
Page 47 - Equipment Care and Troubleshooting; DO; dropping it on the floor, etc. This may cause damage to the; When the Following Messages Appear on the Screen
47 USEFUL INFORMA TION Equipment Care and Troubleshooting DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your Plasma Television away from extreme h...
Page 48 - Troubleshooting; Symptom and Checklist; HDMI Issues
48 Troubleshooting Symptom and Checklist SYMPTOM CHECKLIST PAGES No picture - no sound Check the Indicating lamp status (Off, Red, Blue or Orange). • Check the connection of the power cord and/or other cables. • Check if the power of the unit or external equipment is ON. • Check if the correct mode ...
Page 49 - Reception Problems; RADIO FREQUENCY INTERFERENCE:
49 USEFUL INFORMA TION Reception Problems IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. GHOSTS: Ghosts are caused by the tele...
Page 50 - Notes about Plasma Television
50 Notes about Plasma Television No. ITEM NOTES 1 Buzzing sound from Plasma display panel. A buzzing sound may be heard when the plasma television is turned on in a very quiet room. This is due to the plasma panel drive circuit when it is functioning. The buzzing sound is normal and is not a malfunc...
Page 51 - Features and Specifications; Anti-Reflective Screen; Supplied Accessories:
51 USEFUL INFORMA TION Features and Specifications Features: New • Full HD1080p High-Definition Display (1920x1080p) New • High Gloss Japan Black Frame New • High Aperture Ultra-Black Panel New • Energy Saving Light Sensor New • PictureMaster™ HD VI Video Processor - New Cinema48™ for 24p HDMI™ Inpu...
Page 52 - TV Guide On ScreenTM Legal Notices; Trademark Notice
52 TV Guide On Screen™ Legal Notices Trademark Notice In the United States, TV Guide and other related marks are registered marks of Gemstar-TV Guide International, Inc. and/or one of its affiliates. In Canada, TV Guide is a registered mark of Transcontinental Inc., and is used under license by Gems...
Page 53 - Set Dimensions; Rear View; CENTER OF THE SCREEN; Side View
53 USEFUL INFORMA TION Set Dimensions P50V702 model (Includes Table Top Stand) Weight (lbs./kg): 103.9/47.2 Rear View Use as Reference for Wall Mount Bracket 48-3/16 (1240) 4-1/2 (114.4) 14-7/16 (366) 33-7/8 (861) 31-5/8 (804) 14-13/16 (376) 16-7/8 (429) (ACTIVE AREA) 43-9/16 (1105.9) (ACTIVE AREA) ...
Page 54 - Service Information; Saturday; Operational, hook up and
54 Service Information HITACHI HOME ELECTRONICS (AMERICA), INC. HITACHI has made every effort to assure you hours of trouble free operation from your Hitachi product. Should you require service assistance with OPERATIONAL, HOOK UP, TECHNICAL ASSISTANCE OR WARRANTY SUPPORT, please contact our Support...
Page 55 - LIMITED WARRANTY; Limited Warranty
55 LIMITED WARRANTY Limited Warranty VALID ONL Y IN U.S.A. AND PUERTO RICO Congratulations on your purchase of a new Hitachi display product. Register your product online at www.hitachi.us/tv or mail the included warranty registration card: LIMITED WARRANTY Hitachi Home Electronics (America), Inc. w...
Page 56 - End User License Agreement for HITACHI DTV Software; END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE
56 End User License Agreement for HITACHI DTV Software END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE IMPORTANT – READ CAREFULLY: This End User License Agreement for HITACHI DTV Software (this “Agreement”) is a legal agreement between you (“you” or “your”), in your capacity as the owner of a HI...
Page 57 - End User License Agreement for Open Source Software; OPEN SOURCE SOFTWARE LICENSE INFORMATION; Software Module
57 LICENSE A GREEMENTS End User License Agreement for Open Source Software OPEN SOURCE SOFTWARE LICENSE INFORMATION This Hitachi TV incorporates certain open source software modules distributed under the GNU GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL PUBLIC LICENSE Version 2.1 as define...
Page 58 - End User License Agreement for Operating System Software; Preamble
58 End User License Agreement for Operating System Software Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the sof...
Page 59 - NO WARRANTY
59 LICENSE A GREEMENTS End User License Agreement for Operating System Software 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and...
Page 60 - GNU LESSER GENERAL PUBLIC LICENSE
60 End User License Agreement for Operating System Software GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this l...
Page 63 - APPENDIXES; Appendixes; Appendix A: Picture Format for Each Input Source; Aspect Specifications
63 APPENDIXES Appendixes Appendix A: Picture Format for Each Input Source Aspect Specifications Yes: Selectable --: No Selectable Input Signal Auto Aspect Aspect Video ID Aspect 16:9 Standard 1 16:9 Standard 2 16:9 Zoom 4:3 Standard 4:3 Expanded 4:3 Zoom 1 4:3 Zoom 2 ANT Analog Video NTSC -- 4x3 Yes...
Page 65 - INDEX; Index
65 INDEX Index A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Antennas (Connecting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20, 34, 63 Audio...
Page 66 - Notes
Page 68 - Printed In México
