Page 2 - Important Safety Instructions; To the CATV system installer: This reminder is provided; NOTE; READ BEFORE OPERATING EQUIPMENT; are provided for your safety. If the provided plug does not fit; Power source
2 Important Safety Instructions To the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820- 44 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding sy...
Page 3 - “SCREEN DAMAGES”; Modifications; or
3 Important Safety Instructions Warning To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The plasma television should not be exposed to dripping or splashing and objects filled with liquids, such as vases, should • not be placed on the television. Thi...
Page 4 - THE ISSUE; the safe installation and use of your flat panel display.; IF YOU DECIDE TO WALL; Use a mount that has been recommended by the display manufacturer
4 Important Safety Instructions Congratulations on your purchase! As you enjoy your new product, please keep these safety tips on mind: THE ISSUE The home theater entertainment experience is a growing trend and larger flat • displays are popular purchases. However, flat panel displays are not always...
Page 5 - FIRST TIME USE; Energy Saving Features; Energy Savings Initial Settings:
FIRST TIME USE 5 Energy Saving Features Congratulations on purchasing a ENERGY STAR® qualifying product. This Hitachi product as shipped from the factory meets the United States Environmental Protection Agency (EPA) requirements established for both “On” and “Standby” Operation. Certain features and...
Page 6 - ccessories; For optional accessories, please access our web site at:; REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT; resulting in leakage.; CAUTION
6 A ccessories Check to make sure you have the following accessories before disposing of the packing material. For optional accessories, please access our web site at: www.hitachi.us/tv Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate • ventilation for...
Page 7 - Do not block the ventilation holes of the Plasma; AC Cord Installation; Close clamp #1 to fix the AC cord to the TV.; How to secure Clamp #1; How To Install Your New Hitachi Plasma Television; Caution when moving the main unit; used to reduce the reflection.; Securing to a Table-Top; in a stable and flat surface.; NOTES
FIRST TIME USE 7 Do not block the ventilation holes of the Plasma • Television. Blocking the ventilation holes might cause fire or defect. In case of an abnormal symptom, unplug the AC • cord and contact 800-HITACHI. If you purchased a wall mount bracket, please ask • for professional installer. Do ...
Page 8 - WALL MOUNTING SETUP; who has completed a thorough evaluation of:; the Wall Mount Bracket and the Plasma Television. This length is; very important
8 How To Install Your New Hitachi Plasma Television WALL MOUNTING SETUP STEP (1) : REMOVE THE STAND BASE FROM THE PLASMA TELEVISION Please remove the 4 screws shown below in order to separate the TV from the Table Top Stand. Now the Table Top Stand can be separated from the TV. Useful dimensions for...
Page 9 - Side Panel Jacks & Controls; In order to receive written notification, please complete; Indicating; FRONT VIEW; Your HITACHI Plasma TV will appear to be turned; Indicating Lamp
FIRST TIME USE 9 Side Panel Jacks & Controls In order to receive written notification, please complete and return your warranty card. POWER light indicator To turn the TV ON, press the power switch ( ). A red stand-by indicator lamp located on the lower left corner of the front bezel will illumi...
Page 10 - Rear Panel Jacks; Antenna Input; uncompressed high-definition video and multichannel; For Factory and Service Use Only
10 Rear Panel Jacks Antenna Input To switch between Cable and Air input, go to the Channel Manager option to change the signal source CABLE or AIR (see page 33). Component: Y-PBPR and Audio Inputs INPUTS 1 and 2 provide Y-PBPR and Audio jacks for connecting equipment with this capability, such as a ...
Page 11 - uick Reference Remote Control Buttons and Functions; programming of the Remote Control.; remote control directly at the TV sensor for best results.
FIRST TIME USE 11 Q uick Reference Remote Control Buttons and Functions In addition to controlling all of the functions on your Hitachi Plasma TV, the new remote control is designed to operate different types of devices, such as, DVD Players, CBL (Cable Boxes), set-top-boxes, satellite receivers, an...
Page 12 - Quick Setup Guide; Perform the following steps to quickly setup your new; When both VHF and UHF antennas are connected; The Indicating Lamp will light Red (Standby mode) and; CONNECT YOUR NEW HITACHI PLASMA TV TO THE POWER SOURCE; Press the POWER button on the Remote Control or the; FOLLOW THE TV SETUP WIZARD INSTRUCTIONS ON NEXT PAGE.; If the Power Switch is set to OFF, the Power Button
12 Quick Setup Guide Perform the following steps to quickly setup your new Hitachi Plasma Television Set. 1. ANTENNA CONNECTION Unless your Plasma Television is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. How...
Page 13 - TV Setup Wizard; If this is the first time you have turned on your TV and the TV Setup; Do you want the TV to find all of the channels?; Yes; SEL; RETAIL Mode is intended for showroom or shop use
FIRST TIME USE 13 TV Setup Wizard If this is the first time you have turned on your TV and the TV Setup Wizard appears on-screen, start by selecting Yes or No in the top portion of the TV Setup Wizard. Use the 1. t and u CURSOR to select Yes or No and press the SELECT button on the remote control. D...
Page 14 - Side Panel Connections; Use the side Audio input jacks for the audio connection).; Before Operating External Video Sources; Example: Selecting the; A) Connecting HDMI signal; B) Connecting DVI signal
14 Side Panel Connections The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire. The SIDE panel HD...
Page 15 - Rear Panel Connections; Cables are optional, except when specified.; TIPS ON REAR PANEL CONNECTIONS; components R-Y output to the TV’s PR input.
FIRST TIME USE 15 Rear Panel Connections Cables are optional, except when specified. NOTE TIPS ON REAR PANEL CONNECTIONS COMPONENT Y-PBPR (Input 1 & 2) or HDMI (1 & 2) connections are provided for high performance DVD players, VCRs etc. that have ♦ this feature. Use these connections in plac...
Page 16 - back will be abnormal if the connection is loose.
16 Rear Panel Connections Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played • back will be abnormal if the connection is loose. Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white t...
Page 17 - CONNECTING AN EQUIPMENT SOURCE WITH HDMI; HDMI Input; CONNECTING AN EXTERNAL AUDIO AMPLIFIER; audio amplifier, connect the system as shown on the right. The
FIRST TIME USE 17 Rear Panel Connections CONNECTING AN EQUIPMENT SOURCE WITH HDMI OR DVI CAPABILITY TO HDMI 1, HDMI 2 Connect the HDMI or DVI to HDMI connection cable from the 1. output of the HDTV set top box or DVD player to the HDMI input as shown on the Rear panel at right. With DVI output, conn...
Page 18 - The Remote Control; POWER button; first for channels 1 to 9, or simply press the single digit channel; Press the SELECT button to set the option.
18 The Remote Control POWER button Press this button to turn the TV set on or off when the remote is in TV mode. DEVICE buttons In addition to controlling all the functions on your HITACHI Plasma TV, the new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, s...
Page 19 - How to Use the Remote to Control your TV; Press the INFO button again or the EXIT button to
19 REMO TE CONTR OL How to Use the Remote to Control your TV (-) DASH /Sleep Button Use the (-) DASH button with the CHANNEL SELECTOR buttons to enter Digital Channels that have subchannel numbers indicated by (-) DASH (example 15-1). For TV mode only, press to Set the Sleep Timer from 30 minutes to...
Page 20 - edges of the display area in order to fill it.; ASPECT button; to fill the screen please refer to Auto Aspect function on page 31.
20 How to Use the Remote to Control your TV 4:3 STANDARD Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for only 15% of your total viewing time ...
Page 21 - RECORD button; For automatic DAY/NIGHT picture mode settings,; INPUT button; INPUT 1; For the Record button there is a feature for safety
21 REMO TE CONTR OL How to Use the Remote to Control your TV E.SAVE (ENERGY SAVE) button Use this button to choose power consumption reduction settings based on 3 levels (MIN, MEDIUM, MAX). CLOSED CAPTIONS (CC) button Use this button to display the dialogue, narration, and/or sound effects of a tele...
Page 22 - How to Use the Remote to Control your AV Equipment; preprogrammed into the remote.; OPERATING THE PRECODED FUNCTIONS FOR YOUR AV EQUIPMENT.; confirm proper setup.; SETUP EXAMPLE (Hitachi Cable Box with precode 0003); The indicator light will flash 3 times if the code was accepted.
22 How to Use the Remote to Control your AV Equipment NOTES If your AV component cannot be operated after performing the above procedures, your AV component code has not been • preprogrammed into the remote. In the unlikely event that your AV component cannot be operated after performing the above p...
Page 23 - MY CABLE BOX CODE IS:; EXCLUSIVE TV buttons; PRECODED CABLE BOX buttons; Satellite Receiver for operation of the buttons
23 REMO TE CONTR OL How to Use the Remote to Control your AV Equipment MY CABLE BOX CODE IS: _____________________ Refer to instruction manual of the Cable Box for operation of the buttons exclusively for the Cable Box. NOTE PRECODED SET-TOP BOX/SATELLITE buttons These buttons transmit the chosen pr...
Page 24 - MY DVD PLAYER CODE IS:; PRECODED DVD buttons
24 How to Use the Remote to Control your AV Equipment MY DVD PLAYER CODE IS: _____________________ Refer to instruction manual of the DVD Player for operation of the buttons exclusively for the DVD Player. NOTE MY VCR/PVR CODE IS: ______________________ Refer to instruction manual of the VCR/PVR for...
Page 25 - AVR Device; Refer to the instruction manual of the AVR for; PRECODED AVR buttons; These buttons transmit the chosen precoded AVR; These buttons are for operating the TV :
25 REMO TE CONTR OL How to Use the Remote to Control your AV Equipment AVR Device Button MY AUDIO/VIDEO RECEIVER (AVR) CODE IS: ______________________ Refer to the instruction manual of the AVR for operation of the buttons exclusively for the AVR. PRECODED AVR buttons These buttons transmit the chos...
Page 26 - Remote Control Codes
26 Remote Control Codes CABLE Brand CODES A-MARK 0008,0144 ABC 0237,0003,0008 ACCUPHASE 0003 ACORN 0237 ACTION 0237 ACTIVE 0237 ADB 2092,2586 ARCHER 0237 BCC 0276 BRITISH TELECOM 0003 CENTURY 0008 DIGEO 1187,2187 DIGI 0637 DIRECTOR 0476 DUMONT 0637 FOSGATE 0276 GE 0144 GENERAL INSTRUMENT 0476,0810,0...
Page 28 - Video; This part of the screen shows which
28 On-Screen Display Press MENU on the remote control to display the different 1. features on your Hitachi Plasma TV. Use the CURSOR PAD (buttons, 2. , , and ) and highlight a different feature of the On-Screen Display menu. Press the SELECT button to select. Press EXIT on the remote control to quic...
Page 29 - Audio; the Dynamic Range Compression; Channel Manager; The Signal Meter feature of the
29 ON-SCREEN DISPLA Y Adjust the intensity of high frequencies. Adjust the intensity of low frequencies. Adjust the balance. Select Surround settings (Off, Normal, Wide) Select Bass Boost option ON or OFF. Select between three Audio Sources (ST, Mono, SAP). Select internal or external speakers. Elim...
Page 30 - Use this function to adjust flesh tones so they appear natural.; cinematic film like image.
30 Video Select VIDEO to adjust picture settings and improve picture quality. You can independently customize each of the video inputs to your preference to increase viewing performance and pleasure depending upon the video program being viewed. If RESET is selected, only the selected input will res...
Page 31 - Vertical Position; after the TV is turned off.; Select “Reset” to return Video settings on this; when watching interlace format film based sources. Set to OFF to; Aspect; Return; Auto Aspect; signal to fill the screen.; Mode
31 ON-SCREEN DISPLA Y Vertical Position This function allows you to move the picture up and down when the aspect mode is 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. For example, it will be useful for centering the picture if you want to see sports scores or news tickers. Adjustable range is -10 (video ce...
Page 32 - selected and adjusted in the same manner.; connected to an amplifier/receiver with a
32 Audio Select AUDIO to adjust the sound to your preference. VideoAudioChannel ManagerLocksTimersSetup Move SEL Select + OR Perfect Volume Auto Noise Cancel Internal Speakers Audio Source Bass Boost Surround Balance Bass Treble Audio Move SEL Select Off Off On Stereo Off Off L R 50% 50% Audio Menu ...
Page 33 - Signal Meter; when watching analog channels.; Auto Channel Scan; Channel List; IMPORTANT NOTICE
33 ON-SCREEN DISPLA Y Channel Manager Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List. Press CURSOR PAD 1. , to highlight functions. Press the SELECT button or CURSOR PAD 2. to select. VideoAudioChannel ManagerLocksTimersSetup Move S...
Page 34 - Locks
34 Locks This function will block out the picture and sound of the selected channel or video input. VideoAudioChannel ManagerLocksTimersSetup Move SEL Select + The code to enter the Locks feature is a four digit access code number. The factory preset code is 0000. Use the NUMBER buttons to enter the...
Page 35 - Motion Picture Ratings Table; programs and weather.; TV Parental Guide Ratings Table; Canadian Ratings English Table
35 ON-SCREEN DISPLA Y Locks Motion Picture Ratings Table NOT RATED Contains no rating. Not Rated (NR) and Not Applicable (NA) programs. Movie has not been rated or ratings do not apply.G General audiences. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for child...
Page 36 - Canadian Ratings French Chart; PG
36 Program Title Cable 888-001 11:30 AM 11:55 AM REGION 5 KDEF-DTMulti DTVCC CF-18 ans+ 1080i 10:35 AM Program Title Program Time Digital channel Source Receiving Audio Language (Digital CH)/ Receiving NTSC (Analog CH) Receiving Rating Broadcast Region 5 Rating Receiving Digital Closed Captions Rece...
Page 37 - Timers; Setup; Set The Clock; When AUTOMATICALLY ADJUST CLOCK FOR; Set Sleep Timer; The Sleep Timer info will show for 1 minute before
37 ON-SCREEN DISPLA Y Timers Select TIMERS to set your Clock, Sleep Timer and Day/Night Timer. VideoAudioChannel ManagerLocks Setup Move SEL Select Timers + OR Set Day/Night Timer Set Sleep Timer Set The Clock Timers Move SEL Select Not Set 0 : 00 - - : - - AM PST Set Event Timer Not Set Use the CUR...
Page 40 - Auto TV Off; ▲ or ▼ to highlight the video; INPUT 2 Auto Link; ▲ or ▼ to highlight the; Digital Captions
40 Setup NOTE Auto Sync. Saving Use this feature to turn power off automatically when a video input signal is not detected for 30 seconds. This feature works only for INPUT 1, 2, 3 and HDMI 1, 2, 3. Auto TV Off Use this feature to turn power off automatically when no operation of TV is detected for ...
Page 41 - Set The Power Indicator; Switch between Home and Retail Mode; RETAIL Mode is intended for showroom or shop
41 ON-SCREEN DISPLA Y Setup Set The Power Indicator This feature allows you to adjust the brightness intensity of the LED indicating light in the Front of your Hitachi Plasma TV. Select MAX or LOW for maximum brightness or lowest brigthness. Select OFF to turn off the indicating light. Power Light I...
Page 42 - Equipment Care and Troubleshooting; DO; dropping it on the floor, etc. This may cause damage to the; When the Following Messages Appear on the Screen
42 Equipment Care and Troubleshooting DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your Plasma Television away from extreme heat, humidity and ex...
Page 43 - Troubleshooting; Symptom and Checklist; HDMI Issues
43 USEFUL INFORMA TION Troubleshooting Symptom and Checklist SYMPTOM CHECKLIST PAGES No picture - no sound Check the Indicating lamp status (Off, Red, Blue or Orange). • Check the connection of the power cord and/or other cables. • Check if the power of the unit or external equipment is ON. • Check ...
Page 44 - Reception Problems; RADIO FREQUENCY INTERFERENCE:
44 Reception Problems IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. GHOSTS: Ghosts are caused by the television signal follow...
Page 45 - Notes about Plasma Television
45 USEFUL INFORMA TION Notes about Plasma Television No. ITEM NOTES 1 Buzzing sound from Plasma display panel. A buzzing sound may be heard when the plasma television is turned on in a very quiet room. This is due to the plasma panel drive circuit when it is functioning. The buzzing sound is normal ...
Page 46 - Features and Specifications; HD1080i High-Definition Display; Supplied Accessories:
46 Features and Specifications Features: New • HD1080i High-Definition Display New • High Gloss Japan Black Frame New • High Aperture Ultra-Black Panel New • Energy Saving Light Sensor New • PictureMaster™ HD VI Video Processor New • x.v.Color™ New • Vibrant/Standard Color Space New • Anti-Reflectiv...
Page 47 - Set Dimensions; Rear View; HOLE FOR; Side View
47 USEFUL INFORMA TION Set Dimensions P50A402/P50A202 model (Includes Table Top Stand) Weight (lbs./kg): 96.9/44 Rear View Use as Reference for Wall Mount Bracket 4-1/2 (114.4) 14-7/16 (366) 31-5/8 (804) (DEPTH) 4-1/8 (104) 18-7/8 (480) 15-3/4 (400) 13 (330) HOLE FOR WALL MOUNT (4 PLACES) LOCATION O...
Page 49 - Service Information; Saturday; Operational, hook up and
49 USEFUL INFORMA TION Service Information HITACHI HOME ELECTRONICS (AMERICA), INC. HITACHI has made every effort to assure you hours of trouble free operation from your Hitachi product. Should you require service assistance with OPERATIONAL, HOOK UP, TECHNICAL ASSISTANCE OR WARRANTY SUPPORT, please...
Page 50 - Limited Warranty
50 Limited Warranty VALID ONL Y IN U.S.A. AND PUERTO RICO Congratulations on your purchase of a new Hitachi display product. Register your product online at www.hitachi.us/tv or mail the included warranty registration card: LIMITED WARRANTY Hitachi Home Electronics (America), Inc. warrants this prod...
Page 51 - End User License Agreement for HITACHI DTV Software; END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE
51 LICENSE A GREEMENTS End User License Agreement for HITACHI DTV Software END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE IMPORTANT – READ CAREFULLY: This End User License Agreement for HITACHI DTV Software (this “Agreement”) is a legal agreement between you (“you” or “your”), in your capacity ...
Page 52 - End User License Agreement for Open Source Software; OPEN SOURCE SOFTWARE LICENSE INFORMATION; Software Module
52 End User License Agreement for Open Source Software OPEN SOURCE SOFTWARE LICENSE INFORMATION This Hitachi TV incorporates certain open source software modules distributed under the GNU GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL PUBLIC LICENSE Version 2.1 as defined by the Free Softwa...
Page 53 - End User License Agreement for Operating System Software; Preamble
53 LICENSE A GREEMENTS End User License Agreement for Operating System Software Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--...
Page 54 - NO WARRANTY
54 End User License Agreement for Operating System Software 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may...
Page 55 - GNU LESSER GENERAL PUBLIC LICENSE
55 LICENSE A GREEMENTS End User License Agreement for Operating System Software GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verba...
Page 58 - Appendixes; Appendix A: Picture Format for Each Input Source; Aspect Specifications
58 Appendixes Appendix A: Picture Format for Each Input Source Aspect Specifications Yes: Selectable --: No Selectable Input Signal Auto Aspect Aspect Video ID Aspect 16:9 Standard 1 16:9 Standard 2 16:9 Zoom 4:3 Standard 4:3 Expanded 4:3 Zoom 1 4:3 Zoom 2 ANT Analog Video NTSC -- 4x3 Yes -- Yes Yes...
Page 59 - INDEX; Index
59 INDEX Index A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Antennas (Connecting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 31, 58 Audi...
Page 60 - Notes
Page 62 - Printed In México
