Hitachi IP5000 - Manual
Hitachi IP5000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Open the web interface by pointing a web browser to:; Download Current Firmware:; Software Specification
- Page 3 – Changing the Configuration:; Time
- Page 4 – SIP; Redundancy
- Page 5 – Transfer
Hitachi IP5000 WiFi SIP Phone
1 Important Notes
•
Check the
SIP 3
rd
Party validation web site
for current validation status.
The
SIP 3
rd
Party validation web site
can be viewed at:
http://testlab.inin.com
or
http://testlab.vonexus.com
•
Acceptable audio quality is dependant on a premier WiFi 802.11
infrastructure.
•
After a factory reset, the unit will default to Japanese.
•
SIP Authentication will require TSServer HF3157 for 2.3.1 or xIC 2.4.
•
MWI functionality will require TSServer HF3157 for 2.3.1 or xIC 2.4.
2 Vendor Documentation
Documentation can be found on the CD shipped with the IP5000. Current
firmware, configuration examples and documents can be found on the
Interactive Intelligence Website.
3 Validated Firmware Version
V2.0.1
4 Install
Download related files from the Interactive Intelligence 3
rd
Party website:
http://testlab.inin.com
or
http://testlab.vonexus.com
Contained in the zip file will be the validated version of firmware and
sample .ini files.
5 Configuration
Methods:
•
Manipulation of the supplied .ini file, then uploading it via TFTP through the menu
system. This method is recommended for a quick start scenario and for single unit
deployments. The I3 supplied .ini file, with just a few modifications will get a basic setup
up and running. Please note, the I3 supplied .ini file is not meant to be a drop in
configuration for every environment, it is provided as reference only.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
• Web interface: The web interface is very easy to use and exposed advanced configuration options. Use of the web interface is preferred over manipulation of the .ini files. Initial Setup: • Charge the IP5000 following the procedure outlined in section 4.x of the user’s manual. • Refer to section 1....
mode=code Simple change the user.ini line to read: [3] name=user%M.ini mode=code This will cause the unit to request the ‘loadrun.ini’ and then ‘user000000000000.ini’ for each phone configured. ‘000000000000’ will represent the MAC address of each specific unit. Changing the Configuration: • Prior t...
SIP • Local Port (5000~40000) 5060 • T1 (0~65535) 500 ms • T2 (0~65535) 4000 ms • T4 (0~65535) 5000 ms • Timer B ( 0:Disable , 500~65535) 0 ms • Timer F ( 0:Disable , 500~65535) 0 ms • Use User Agent On Off • User Agent Name BillA SIP4 • Use Version On User Agent On Off • Use Vendor ID On User Agent...
