Hitachi hitachi driver - Manual
Hitachi hitachi driver – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – installed and ready to use” appear.
- Page 4 – dialog box appears to install the USB driver. Go to Next.
- Page 6 – Control Panel
DVD CAM Software Support Center
Software Tutorials
Driver Installation Manual: How to install Hitachi driver(DZ-MV270)
Installing Hitachi Device Drivers for DZ-MV270
1. Terminate all the applications and insert the installation CD to the CD-ROM drive of your PC. If any anti-virus software
is running, deactivate the software during the installation.
2. Insert your DVD-RAM disc that contains video or photo into the drive of Hitachi DVD video camera / recorder and power
on Hitachi DVD video camera / recorder to the position of "VIDEO" or "PHOTO".
3. Connect PC and Hitachi DVD video camera / recorder using USB cable. For your PC, be sure to connect to the unused
USB port on the back of your PC. The red CHARGE/ACCESS indicator will be turned off following with beeping sound.
At this time, the CHARGE/ACCESS indicator is black and LCD and viewfinder are off. Your PC should recognize
Hitachi DVD video camera / recorder as "Found New Hardware".
4. The "Found New Hardware Wizard" dialog box should appear on your PC. Follow the instructions to complete the
installation referring to the Step-by-Step example below.’
Step-by-Step Example for Windows XP:
(a) PC recognizes the New Hardware attached to PC as the following in the task bar on the right below corner.
(b) The Wizard dialog box appears to install the USB driver. Select "Install from a specific location".
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
(c) Specify the location by selecting the “Browse” button and select ¥Drivers¥Win2K_XP folder in CD and go to "Next". For Hardware Installation warning dialog box, select "Continue Anyway". (d) The installation should proceed as the following. (e) USB driver installation is completed...
Step-by-Step Example for Windows 98/98SE: (a) PC recognizes the New Hardware attached to PC and “Create driver database” message appear. Next, the Wizard dialog box appears to install the USB driver. Go to Next. Select "Search for the best driver for your device (Recommended)" and go to Next...
(f) For the confirmation of the installation, check device manager. (Path: Start Æ Control Panel Æ System) Double click “Hitachi DVDCAM(DZ-MV270) USB Interface” to check the device status whether the device is working properly.
