Hitachi hitachi air purifier with humidifying function - Manual

E-5 Safety Pr ecautions Place of Use Water Tank, Water Tray and Humidifying Filter WARNING Do not operate the unit without setting any of the water tank, water tray and humidifying fi lter in place. Otherwise, it may cause injury or unit failure. Do not use any detergent (neither kitchen nor laundry ...

E-6 Miscellaneous To Prevent Floor Scratches or Wall Stains During Cleaning / Place of Use Safety Precautions (Continued) Securely hold the grip when carrying air purifi er. Dropping it may cause injury. When you attach or detach the panel and water tank, do it slowly and securely. Otherwise, it may ...

E-7 Safety Pr ecautions Cautions on Use Do not install in an unstable or sloped place, or near any obstacles. The unit may fall or drop, resulting in damage or unit failure.If the space between the unit and floor remains humid, the floor may get moldy.Using the unit tilted may cause water leakage. D...

E-8 Preparations for Operation Setting Filter in Purifier (Perform the same procedure when replacing filter. ) Remove the panel. Inserting Batteries into Remote Controller Lay a soft cloth or the like beneath the purifier to protect the floor against scratch. No cleaning effect is obtainable if the ...

E-9 Installation Preparations for Operation Installation Filling Water Tank (for Humidify Mode and Skin Moisturize Modes) Gently remove the water tank. Remove the tank cap and fill fresh tap water of normal temperature. CAUTION Do not carry the water tank by holding its handle. Instead, hold the tan...

E-10 (Approx.) On/Off Mode Timer Max SensorSetting Airflow (Orange) On/Off Humidity Level (Green) (Orange) Humidify Air Sensor Clean Humidifying Filter Air Purify Auto Max(Blinking) Pollen Strong Deodorization Timer (4hrs) Skin Moisturize Using Remote Controller Here we describe how to operate the a...

E-11 On/Off Mode Timer Max SensorSetting Airflow Using Remote Contr oller Selecting Operation Mode (Basics) 5 operation modes are available for your choice. In every operation mode, the fan will not stop during operation. In every operation mode, air purifying function will work. Upon every switchin...

E-12 Using Remote Controller (Continued) Airflow rate When “Auto” is lit, the following airflow rate is used according to the selected operation mode. The airflow rate indicators from “Silent” to “Max” are not lit. Mode Air Purify Pollen Strong Deodorization Humidify Skin Moisturize Airflow Range Si...

E-13 Using Remote Contr oller Using the Contr ol on Purifier Max Operation This operation is useful when many people smoke or when you want quick cleaning of room air. The airflow indicator blinks for 5 minutes. Blink Press button. Using Timer Operation will stop approx. 4 hours after timer setting....

E-14 Memory Function / Sensors / Auto Detection Memory Function When you stop the operation and then restart, the purifi er will resume the operation status before shutdown. If you operate the purifi er for approx. 5 seconds or longer, the operation status will be stored in memory. (If you stop the op...

E-15 Memory Function / Sensors / Auto Detection Adjusting Sensor Sensitivity Setting Sensor sensitivity can be adjusted in 3-step fashion. In each operation mode, The airflow indicator will blink for 5 seconds. While the airflow indicator is blinking, The factor y setting is “Medium”. Present settin...

E-16 Useful Feature Dimmer Control If you feel uncomfortable about indicator lightings when you go to sleep, press button on the purifier unit for 3 seconds or longer to dim the indicators. Press button for 3 seconds or longer. The indicators are dimmed. How to set/cancel Every time you press button...

E-17 When the “Clean Humidifying Filter” Indicator Comes On Cleaning Remove the water tank, and then pull out the water tray. Remove the humidifying filter from the water tray. Clean the humidifying filter, water tray and tray cover. Install the water tray, and then mount the water tank. Plug the po...

E-18 Water Tank (Guide for cleaning: Daily) Change water daily with fresh tap water. Discard remaining water in the tank if any. Pour small quantity of tap water, tighten the cap firmly and shake to wash. (Change water and repeat the steps 2-3 times.) Humidifying Filter (Guide for cleaning: Once a m...

E-19 Water Tray / Tray Cover (Guide for cleaning: Once a month) Wash with water to remove dirt. Remove the tray cover. Wipe off water and assemble. Attach the tray cover to the water tray. Remove the tray cover from the water tray. Cleaning Replacing Humidifying Filter The humidifying fi lter is a co...

E-20 Pre-filter (Guide for cleaning: Once a month) Remove the pre-filter. Clean the pre-filter. Remove the panel. Reattach the pre-filter. Reattach the panel. Cleaning (Continued) Install the water tray, and then mount the water tank. P.E-9 P.E-8 P.E-8 P.E-9 To clean the pre-fi lter, follow the steps...

E-21 Purifier Body (Guide for cleaning: Once a month) Cleaning Filter Replacement Replacement Interval Precautions on Filter Handling Filter Replacement Wipe off dirt on the purifi er case using a soft cloth that is moistened with water and fully wrung. For heavy dirt, use a soft cloth moistened with...

E-22 Replacing the Filter Filter Replacement (Continued) Alert Display Symptom Cause All airflow indicators are blinking. P.E-26 Use the fi lter No. EP-DX40E-902 separately available. Before replacing the fi lter, be sure to stop the purifi er and unplug the power cord from AC outlet. No cleaning effec...

E-23 No humidifying effect Is the operation in any of the “Air Purify”, “Pollen” or “Strong Deodorization” mode? Change the operation mode to the “Humidify” or “Skin Moisturize” mode. Alert Display T roubleshooting Guide Troubleshooting Guide Smoke or smell is not efficiently removed, or there is an...

E-25 T roubleshooting Guide Symptom Cause Following Conditions Are Normal Electric components are energized when power is supplied. This is normal. Snapping noise when plugging power cord into AC outlet Vibration is caused by fan rotation. This is normal. Purifier body vibration during the “Max” ope...

E-26 Replacement Parts (Separately Available) Filter Designate the replacement partNo. EP-DX40E-902 when ordering. Pre-filter Designate the replacement part No. EP-BX40-002 when ordering. Humidifying Filter Designate the replacement partNo. EP-DX40E-908 when ordering. The case is not included. Tank ...

E-27 Model EP-A5000 Power supply AC220-240V 50-60Hz Airflow switching Max High Medium Silent Power consumption (W) 50 32 14 4 Airflow rate (m 3 /min) 5.0 4.3 2.9 0.9 Applicable floor space 33m 2 Humidifying performance (mL/h) Approx. 520 (Max operation) External dimensions 537(H) x 430(W) x 242(D) m...