Hitachi G23UB2 - Manual
Hitachi G23UB2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Fitting and adjusting the wheel guard
- Page 4 – PRACTICAL GRINDER APPLICATION; Precautions immediately after finishing operation
- Page 5 – MAINTENANCE AND INSPECTION
- Page 12 – Printed in Malaysia
Disc Grinder
Model G 18SE3 • G 18SG2 • G 23SF2
G 23U2 • G 23SE2 • G 23UB2
Handling instructions
NOTE:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It
is recommended that these INSTRUCTIONS be kept readily
available as an important reference when using this power tool.
G23SE2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SPECIFICATIONS *1 Be sure to check the nameplate on product as it is subject to change by areas.*2 Weight: Only main body*3 The starting current limiter produces the starting current to such an extent that a fuse (16A, slow-blow) is not tripped. STANDARD ACCESSORIES (1) Wrench .......................
3 5. Ensure that the depressed center wheel to be utilized is the correct type and free of cracks or surface defects.Also ensure that the depressed center wheel isproperly mounted and the wheel nut is securelytightened, refer to the section on “Depressed CenterWheel Assembly”. 6. Conducting a trial ...
4 MAINTENANCE AND INSPECTION 1. Inspecting the depressed center wheel Ensure that the depressed center wheel is free ofcracks and surface defects. 2. Inspecting the mounting screws Regularly inspect all mounting screws and ensurethat they are properly tightened. Should any of thescrews be loose, ret...
