Hitachi CP-WX8240 - Manual
Hitachi CP-WX8240 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USB TYPE A; Connecting the Pen tablet / USB mouse and USB Memory Devices; USB TYPE B; Connecting the Computer and Projector with a USB Cable; Example of connections; NOTE
- Page 3 – Using the Drawing Function; LAN
- Page 4 – Eraser
1
Projector
CP-X8150/CP-WX8240
User's Manual (detailed)
Operating Guide – Drawing function
Drawing function enables you to draw on the projector’s screen with USB mouse
or tablets connected to the
USB TYPE A
ports.
Main Functions
ü
Drawing on projected images
You can draw pictures or text on images projected by our projectors.
•
Authorization by the copyright owner(s) is required pursuant to
including visual images, if such works are copyrighted works.
•
This drawing function may not work depending on the image signal.
ü
Saving and displaying drawn images
You can save images with pictures or text drawn on them to a USB memory
device and then retrieve the saved images and display them again later.
•
A USB memory device is necessary to use this function. In addition,
if your projector only has one available
USB TYPE A
port, you will also need a
USB hub.
•
Copyright protected images cannot be saved.
ü
Use as a simple mouse
The Hitachi Pen tablet / USB mouse can be used as a simple mouse of a
computer connected to a projector.
•
To use this function, a USB cable is required to connect the computer
and the projector.
• Some Hitachi Pen tablets and USB mouse devices may not operate properly.
NOTE
NOTE
NOTE
Drawing function
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Drawing function 2 Connect into the USB TYPE A port on your projector. To save an image that has been drawn, a USB memory device must also be connected to a USB TYPE A port of the projector. If the projector only has one availabe USB TYPE A port, use a USB hub to connect both devices. Connecting the...
Drawing function 3 Using the Drawing Function Touching/clicking Hitachi Pen tablet / USB mouse function key starts up the drawing mode. A tool bar like the figure below is displayed on the projector screen while in the drawing mode. Touching/clicking an icon on the tool bar enables the following fun...
Drawing function 4 4. Eraser Switches the electronic pen function to that of an eraser and specifies its size. The cursor turns into an Eraser ; dragging it erases previously drawn lines. Specifies a 12-dot Eraser . Specifies a 20-dot Eraser . Specifies a 28-dot Eraser . 5. Erase Erases all the line...
