Hitachi CP-A300N - Manual - manualsarea.com

Page 2 - First of all; defined in these manuals of this projector.

2 First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. Important safety instruction The followings are important instructions f...

Page 3 - Regulatory notices; About Electro-Magnetic Interference; In Canada; This Class A digital apparatus complies with Canadian ICES-003.; In the US and places where the FCC regulations are applicable; digital device, pursuant to Part 15 of the FCC Rules.; INSTRUCTIONS TO USERS:; Some cables have to be used with the core set.

3 ENGLISH Regulatory notices About Electro-Magnetic Interference This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.This product may cause interference if used in residential areas. Such use ...

Page 4 - Contents of package; NOTE; About Waste Electrical and Electronic Equipment

4 Contents of package Your projector should come with the items shown below. Check that all the items are included. Require of your dealer immediately if any items are missing.(1) Remote control with the two AA batteries (2) Power cord (3) Computer cable (4) Parts of cable cover (5) User’s manuals (...

Page 5 - WARNING; ►Install the projector in a stable horizontal position.; CAUTION; ►Avoid placing the projector in smoky, humid or dusty place.; Arrangement; higher, set FAN SPEED of the SERVICE item in the OPTION

5 ENGLISH WARNING ►Install the projector in a stable horizontal position. ►Place the projector in a cool place, and ensure that there is sufficient ventilation. Do not place the projector where the air from an air conditioner or similar unit will blow on it directly. ►Do not place the projector anyp...

Page 6 - Disc player; Connecting with your devices; • When AUTO is selected for the; COMPUTER IN1; or; COMPUTER IN2; port in; LAN; port with the; USB TYPE A; • You can connect a dynamic microphone to the; MIC; while the sound from the projector is output.

6 Access point COMPUTER IN1 COMPUTER IN2 HDMI USB TYPE B S-VIDEO VIDEO AUDIO OUT AUDIO IN3 AUDIO IN1 AUDIO IN2 MIC MONITOR OUT CONTROL USB TYPE A DC5V 0.5A R L COMPONENT Cb/PbY Cr/Pr AUDIO OUT HDMI R L R L VIDEO S-VIDEO AUDIO OUT AUDIO OUT AUDIO OUT USB (A) DISPLA Y RS-232C LAN VCR/DVD/Blu-ray Disc ...

Page 8 - Connecting power supply; Firmly plug the power cord’s plug into the; POWER; • Never modify the power cord.; NOTICE; AC IN; Power cord

8 Connecting power supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector. 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when t...

Page 9 - Using the cable cover; Combine parts as shown in figure,; ► Be careful not to pinch the cables in the cable cover, to

9 ENGLISH Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. 1. Connect the signal cables and the power cord to the projector first. 2. Combine parts as shown in figure, and assemble the cable cover. 3. Insert the three knobs on the cable cover into the th...

Page 10 - Preparing for the remote control

10 Preparing for the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a...

Page 11 - Turning on the power; Make sure that the power cord is firmly; Confirm that there is nothing that the; • Please power on the projector prior to the connected devices.; button; indicator

11 ENGLISH Turning on the power 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. 2. Make sure that the POWER indicator is steady orange. 3. Confirm that there is nothing that the lens door hits while opening. Press the STANDBY/ON button on the proje...

Page 12 - INPUT; Displaying and switching the image; COMPUTER; of Front and Rear foot.; ►Keep the spacers away from children and pets. Be careful not; Front foot

12 Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator fe...

Page 13 - ASPECT

13 ENGLISH Focusing Use the FOCUS + and FOCUS – buttons on the projector or remote control to adjust the screen focus. Selecting an aspect ratio Each time you press the ASPECT button on the remote control, it switches the aspect ratio of the image, in turn. Zooming Use the D-ZOOM + and D-ZOOM – butt...

Page 14 - Turning off the power; Be careful not to pinch your finger with the lens door, to; • This projector has the AUTO POWER OFF function that can make the

14 Turning off the power 1. Press the STANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. 2. Confirm that there is nothing that the lens door hits while closing. Press the STANDBY/ON button again while the message appears....

Page 15 - Replacing the lamp; In case of replacement by yourself, follow the; lamp cover; Handle

15 ENGLISH Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and ea...

Page 17 - MENU; Cleaning and replacing the air filter; ►Before taking care of the air filter, make sure the power cable; the air filter, for a suitable indication about the air filter.

17 ENGLISH The air filter has two kinds of filters inside. Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. If the filters are damaged or heavily soiled, replace them with the new ones. To pr...

Page 18 - Replacing the internal clock battery; HITACHI MAXELL; Battery Cover

18 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing. 3. Turn the battery cover fully in the direction indicated “OPEN” using a co...

Page 19 - Caring for the mirror and lens; For around edge of the mirror and lens where might; ►Before caring for the projection mirror and lens, turn the; ►Be careful not to pinch your finger with the lens door, to prevent; Cleaning cloth

19 ENGLISH Caring for the mirror and lens If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling. 1. Turn the projector off and unplug the power cord from the power outlet. And...

Page 20 - Using the CD manual; System requirements; How to use the CD; Windows; ROM is designed for PC use only. NEVER INSERT THE CD-ROM INTO A; • The information in the CD-ROM is subject to change without notice.

20 Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows ® : OS:Mi...

Page 21 - Item; Specifications

21 ENGLISH 345 303 94 124 85 72 130 308 119 192 Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp 210W UHP Speaker 10W Power supply AC 100-120V/ 3.1A , AC 220-240V /1.6A Power consumption AC 100-120V:310 W, AC 220-240V:...

Page 22 - Troubleshooting - Warranty and after-service; should occur, stop using the projector immediately.; Product; permitted without express written consent.; End User License Agreement for the Projector Software; each of such software modules.

22 Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of “Operating Guide” and “Network Guide”, a...

Hitachi CP-A300N - Manual

Table of Contents:

Summary

Other Hitachi Models