Page 5 - User’s Guide; How to Request a User’s Guide
StarBoard BT-2G User’s Guide How to Request a User’s Guide When requesting a separate copy of this user’s guide, specify BT2G-061101. BT2G-061101 Hitachi Software Engineering Co., Ltd. Read this user’s guide and carefully retain it for future reference. Before using this product, carefully read and ...
Page 7 - StarBoard; English; Notices
1 StarBoard BT-2G English Notices Reproduction or reprinting, without permission, of this manual or any part thereof is prohibited. The contents of this manual are subject to change without prior notice. Every effort has been made to ensure that this manual is complete and correct. However, should a...
Page 8 - Product Assurance Provisions; Manual Creation Dates; November 2006, First Edition
2 StarBoard BT-2G English Product Assurance Provisions This product is limited to use in the country where the user bought this product. For warranty details, refer to Appendix 5.3 at the end of this user’s guide. This first edition of the user’s guide (BT2G-061101) is for the following products: RS...
Page 9 - Safe Handling; Markings and Symbols; This symbol draws attention to cautions (including warnings).
3 Safe Handling StarBoard BT-2G English Safe Handling Markings and Symbols Various markings and symbols are used in this user’s guide and on this product, to ensure the safe and correct use of this product and to prevent personal injury and property damage. These symbols and their meanings are as ex...
Page 10 - Do not use this product near water.; Electric shock might result.; Safety Precautions; Always comply with them.; CAUTION
4 Safe Handling StarBoard BT-2G English Do not use this product near water. Electric shock might result. Be careful about the locations of the USB cable, etc. The USB cable might trip someone, possibly causing the product to fall, etc., thereby causing injury or product failure. Be careful with thei...
Page 11 - Warning Details; Be sure to orient the battery correctly.
5 Safe Handling StarBoard BT-2G English Careful thought was given to the cautions on this device and in this user’s guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions. Warning Details Page Be sur...
Page 12 - Contents
6 Contents StarBoard BT-2G English Contents 1. Introduction ................................................................................................. 1-1 1.1 Parts Check ......................................................................................................... 1-1 1.2 Part Nam...
Page 13 - Introduction; Name
1-1 StarBoard BT-2G Introduction English 1. Introduction 1.1 Parts Check After unpacking, make sure that all of the following parts are included. Parts No. Name Qty. (1) 7.5-inch Bluetooth/USB Tablet 1 (2) Stylus pen 1 (3) AAA alkaline battery 1 (4) Spare pen tips 2 (5) Pen tip replacement pin set 1...
Page 14 - Part Names and Functions
1-2 StarBoard BT-2G Introduction English 1.2 Part Names and Functions 1.2.1 Front Side of the tablet (1) Tablet active area Receives text and graphical information entered with the stylus pen, and transmits the data to a PC. (2) Function keys Twelve functions can be assigned to these keys. (For deta...
Page 17 - Usage Procedures; This section describes the basic procedures for using StarBoard.; How to use tablet; This section describes how to use the tablet.; Changing the battery in the tablet; charged cells as described below.; Keep the following points in mind when installing the StarBoard.; BT-2G tablet locations
2-1 StarBoard BT-2G Usage Procedures English 2. Usage Procedures This section describes the basic procedures for using StarBoard. 2.1 How to use tablet This section describes how to use the tablet. 2.1.1 Changing the battery in the tablet The tablet contains 2 AA Ni-MH batteries. If the LED indicato...
Page 18 - When the battery power is low, the red LED will be solid. In this; Active area
2-2 StarBoard BT-2G Usage Procedures English 2.1.2 Basic Tablet operation (1) Tablet active area Tablet active area is inside of the rectangle line on the tablet. The active area and the display resolution are automatically corresponded. If they are not suited, please reboot the PC. (2) Function key...
Page 19 - Using the Stylus Pen
2-3 StarBoard BT-2G Usage Procedures English 3. The blue LED will blink continuously during connecting to PC. 4. The blue LED will be solid when the pen is detected within active area. - USB mode 1. When USB cable is initially connected to the tablet, the red LED will flash once and the blue LED wil...
Page 20 - Pen tip
2-4 StarBoard BT-2G Usage Procedures English 2.2.2 Basic Stylus Pen Operations The stylus pen can be used in the same way as a mouse. Under the stylus pen’s default settings, the pen tip button is set to correspond to the left mouse button. When Windows is open, the pen tip button may be used to per...
Page 21 - Changing the battery in the stylus pen; positive side facing the pen tip.
2-5 StarBoard BT-2G Usage Procedures English 2.2.4 Changing the battery in the stylus pen The stylus pen contains a single AAA alkaline battery. If the pen begins to operate erratically (e.g., if pen input is cut off), change the battery as described below. Note that battery life is approximately 18...
Page 23 - Setup Software; Install Bluetooth tablet manager; tablet manager will be installed.
3-1 StarBoard BT-2G Setup Software English 3. Setup Software Before starting installation, tablet and stylus pen needs to be ready. (1) Insert batteries to the tablet and the stylus pen. (2) Power on the stylus pen. (3) Power on the tablet and keep pressing the "disconnect" button 5seconds o...
Page 24 - Install WIDCOMM Bluetooth Software
3-2 StarBoard BT-2G Setup Software English 3.2 Install WIDCOMM Bluetooth Software (1) Insert "StarBoard BT-2G Setup Software" CD to PC again. (2) Click "Bluetooth Dongle Driver" and install WIDCOMM Bluetooth Software. (3) Start "WIDCOMM Bluetooth Software" automatically. Clic...
Page 25 - USB
3-3 StarBoard BT-2G Setup Software English (6) Installation is ready to start. Click "Install". (7) If "Driver Signature Notice" appears on the screen, click "OK". (8) After "Bluetooth device not found" message appears, plug the Bluetooth adapter to USB port. (9) Clic...
Page 26 - Bluetooth connection setup
3-4 StarBoard BT-2G Setup Software English The Bluetooth icon in system tray indicates the Bluetooth adapter status. Status Enabled Disabled Connected Bluetooth Icon Blue circle with White logo Blue circle with Red logo Blue circle with Green logo 3.3 Bluetooth connection setup (1) Double click "...
Page 27 - tablet and adapter.
3-5 StarBoard BT-2G Setup Software English (5) Choose the Bluetooth services that you would like to use. Then click "Next". (6) Click "Skip". (Please don't click "Next" in this procedure.) (7) Initial setting is finished. USB adapter is ready to be used. Click "Finish"...
Page 28 - by stylus pen
3-6 StarBoard BT-2G Setup Software English (10) Double click "Hitachi Pen Pad" And click "Yes". After "Confirmation Required" window appears, click "click here" button by stylus pen . (It takes sometime to recognize the tablet driver.) (11) If the "Hitachi Pen Pad...
Page 29 - Bluetooth Pen pad window will appear.
3-7 StarBoard BT-2G Setup Software English 3.4 Tablet settings BT-2G is worked by "Bluetooth Pen Pad manager". When click icon on task tray, Bluetooth Pen pad window will appear. (1) About - Unit To indicate the active area by inch or cm. - Tracking Mode *Pen (Absolute) The active area corre...
Page 31 - How to connect and disconnect BT-2G; Connect; PC
4-1 StarBoard BT-2G How to connect and disconnect BT-2G English 4. How to connect and disconnect BT-2G 4.1 Bluetooth Mode If you would like to use BT-2G in the case which needs to connect in wireless, please connect BT-2G and PC as follows. Connect (1) Power on the Tablet. (2) Keep pressing "dis...
Page 33 - Appendix; Other
5-1 StarBoard BT-2G Appendix English 5. Appendix 5.1 Troubleshooting First, check adjustments and handling methods and check for poor cable connections. Those are often the causes of problems when nothing is actually broken. Connection problems (Wireless) In this case Check this And do this Is the B...
Page 34 - Stylus pen-related problems; Is battery worn out?
5-2 StarBoard BT-2G Appendix English Stylus pen-related problems In this case Check this And do this Is battery worn out? Replace stylus pen battery. (For details on how to change the battery, see “2.2.4 Changing the Battery in the Stylus Pen” on page 2-5 of this User’s Guide.) Is pen tip worn down?...
Page 35 - System Specifications
5-3 StarBoard BT-2G Appendix English 5.2 System Specifications Item Specification Product name StarBoard BT-2G Model No RSK-T06 (StarBoard BT-2G AH00144) Input system Electromagnetic induction Interface (Bluetooth) (USB) Bluetooth 1.2 (class II) USB 1.1 Full speed Effective area size 6 x 4.5 inches ...
Page 36 - Provisions of Product Warranty; Product Name
5-4 StarBoard BT-2G Appendix English 5.3 Provisions of Product Warranty 1. During the free warranty service period, if a malfunction occurs during normal use, the malfunction will be corrected without charge, according to the provisions of the warranty. Furthermore, if the customer registration card...
Page 40 - rB
How to Request a User's Guide When requesting a separate copy of this user's guide, specify BT2G-061101 . Read this user's guide and carefully retain it for future reference. Before using this product, carefully read and fully understand the safety instructions. Store this user's guide nearby for ea...
