Hitachi AP 720STM - Manual - manualsarea.com

Page 2 - Confidentiality Notice; permission from Hitachi Chemical Diagnostics, Inc.

1 Confidentiality Notice The materials and information contained herein are being provided by Hitachi Chemical Diagnostics to its customer solely for customer’s use for its internal business purposes. Hitachi Chemical Diagnostics retains all rights, title, interest in and copyrights to the materials...

Page 3 - Table of Contents; Page; Screen Display and Operation Method

2 ― Table of Contents ― Page 1 Operation Key…………………………………………………………... 3 2 Screen Display and Operation Method 2-1 Initialization……………………………………………………… 4 2-2 Main Menu………………………………………………………. 5 2-3 Panel Type Selection…………………………………………….. 6 2-4 Auto-Run (Process 1 to 7)………………………………………. 7 2-5 Auto-Run (Ph...

Page 4 - Operation Key; Liquid Crystal Panel

3 1 Operation Key Display: Liquid Crystal Panel Operation Key: Only the touch panel key in the shaded field is executable. Press the Operation Key to execute the function. See Figure 1. Numerical Value Input Key: Numerical value can be registered by ‘ENT’ key. If the value entered is out of the defi...

Page 5 - Pause: To Figure 27 Pause screen

4 2 Screen Display and Operation Method 2-1 Initialization [Screen Display] (Figure 3) (Figure 4) [Summary] Figure 3 will display approximately 5 seconds after the power is turned on. Then the screen will change automatically to the initialization screen, Figure 4. After the completion of initializa...

Page 6 - To Figure 7 Panel Type Selection screen

5 2 Screen Display and Operation Method 2-2 Main Menu [Screen Display] (Figure 5) (Figure 6) [Summary] Figure 5 is the Main Menu screen after completion of Figure 4. Panel 36 is the default panel. Figure 6 is the Main Menu screen after selecting Panel 20 in Figure 7. [Operation Key] Panel 36: To Fig...

Page 7 - To Figure 5 Main Menu screen

6 2 Screen Display and Operation Method 2-3 Panel Type Selection [Screen Display] (Figure 7) [Summary] Select 36-allergen or 20-allergen panel in Figure 7. [Operation Key] 36: To Figure 5 Main Menu screen 20: To Figure 6 Main Menu screen

Page 10 - Stop beep sound

9 2 Screen Display and Operation Method 2-5 Auto-Run (Photoreagent Setup and Process 8) [Screen Display] (Figure 15) (Figure 16) (Figure 17) [Summary] Figure 15 will alarm Operator that Photoreagent is needed. The display shows the elapsed time from the start of auto-pause. “Alarm Off” key will stop...

Page 17 - Start Process key:

16 2 Screen Display and Operation Method 2-9 Start/End Process and Position Setup [Screen Display] (Figure 35) [Summary] Figure 35 will appear when power interruption occurs during Auto-Run or the current process is cancelled/paused during Auto-Run. Before re-starting the Auto-Run, the Operator need...

Page 22 - Interrupted run

Auto-Run Pause Maintenance AP720S™ Panel Flowchart Interrupted run 21

Hitachi AP 720STM - Manual

Table of Contents:

Summary

Other Hitachi Models