Page 2 - IMPORTANT SAFETY INSTRUCTIONS; Follow all warnings and instructions marked on this television.; CAUTION; POWER SOURCE; or
IMPORTANT SAFETY INSTRUCTIONS 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI LCD REAR PROJECTION TELEVISION Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units. To help you operat...
Page 3 - Read before operating equipment; PUBLIC VIEWING OF COPYRIGHTED MATERIAL
IMPORTANT SAFETY INSTRUCTIONS 3 Read before operating equipment Follow all warnings and instructions marked on this television.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth....
Page 4 - ACCESSORIES; REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT; REMOTE CONTROL; FIRST TIME USE; PART NAME
ACCESSORIES 4 1. Remote Control Unit CLU-4329UG (Part No. HL01839).2. Two “AA” size, 1.5V batteries (For Remote Control Unit). REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling th...
Page 5 - HOW TO SET UP YOUR NEW HITACHI LCD REAR PTV; ANTENNA; not be considered defective.; VIEWING ANGLE
HOW TO SET UP YOUR NEW HITACHI LCD REAR PTV 5 ANTENNA Unless your LCD Rear PTV is connected to a cable TV system or to a centralized antenna system, a good outdoor TV antenna isrecommended for best performance. However, if you are located in an exceptionally good signal area that is free from interf...
Page 6 - HOOK-UP CABLES AND CONNECTORS
HOOK-UP CABLES AND CONNECTORS 6 ANTENNA CONNECTIONS TO REAR JACK PANEL VHF (75-Ohm) antenna/CATV (Cable TV) When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATVcoaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna orcable TV system, connect the coaxial c...
Page 7 - FRONT PANEL CONTROLS; CHANNEL selector
FRONT PANEL CONTROLS 7 INPUT 5 S-VIDEO EXIT INPUT SELECT MENU VOL- VOL+ CH- CH+ VIDEO AUDIO L/MONO R PUSH PUSH CURSOR MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. Thisbutton also serves as the SELECT b...
Page 8 - IR RECEIVER; Press this button to turn the TV on or off.; POWER light; NORMAL OPERATION INDICATOR IS OFF
FRONT PANEL CONTROLS 8 FIRST TIME USE IR RECEIVER The screen area also acts as the IR receiver (remote sensor) of the TV. When using the remote control, point it towards the screenfor best response. POWER button Press this button to turn the TV on or off. POWER light This light is on during normal o...
Page 9 - FRONT PANEL JACKS AND CONNECTORS
9 FRONT PANEL JACKS AND CONNECTORS The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the followingexamples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture ma...
Page 10 - REAR PANEL JACKS; ANT B; only when ANT B is displayed as a main picture.; MONITOR OUT
10 REAR PANEL JACKS Antenna Input/OutputANT A - A 75-Ohm RF antenna or CATV (Cable TV) input. ANT A can be displayed as a main picture or sub-picture. ANT B - A 75-Ohm RF antenna or CATV (Cable TV) input. ANT B can only be displayed as a main picture. ANT B cannot be displayed as a sub-picture. TO C...
Page 11 - Inputs; Inputs 1 and 2 provide Y-P
11 REAR PANEL JACKS Component: Y-P B P R Inputs Inputs 1 and 2 provide Y-P B P R jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use composite video signal for INPUT:2. NOTES: 1. Do not connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the sa...
Page 12 - REAR PANEL CONNECTIONS; Connect only 1 component to each input jack.; TYPICAL FULL-FEATURE SETUP
12 REAR PANEL CONNECTIONS NOTES: 1. Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. 3. Composite video signal can be input to Input2~Input5. 4. Cables are not included with the purchase of this TV, except when noted as “provided”...
Page 13 - TIPS ON REAR PANEL CONNECTIONS; and the components R-Y output to the TV’s PR input.
13 TIPS ON REAR PANEL CONNECTIONS • S-VIDEO and DVI-HDTV connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. • If your device has only one audio output (mon...
Page 14 - CONNECTING EXTERNAL AUDIO DEVICES; the sound using the remote control of the TV set.; REAR PANEL OF TELEVISION
14 CONNECTING EXTERNAL AUDIO DEVICES To control the audio level of an external audio amplifier with the TV remote control, connect the system as shown below. NOTES: 1. To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using...
Page 15 - CONNECTING EXTERNAL VIDEO DEVICES; CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5; Press the ANT button to return to the previous channel.; Before Operating External Video Source
15 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to t...
Page 16 - CONNECTING A STEREO SOURCE TO INPUT2~INPUT5
16 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A STEREO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INP...
Page 17 - CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5
17 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player t...
Page 18 - CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1; played back will be abnormal if the connection is loose.
18 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1 1. Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the HDTV s...
Page 20 - THE REMOTE CONTROL; TV OR VCR/DVD BUTTONS; THE
20 THE REMOTE CONTROL In addition to controlling all the functions on your HITACHI LCD Rear PTV, the new remote control is designed to operate differ-ent types of VCRs, CBL (Cable TV) converters, satellite receiver, DVD players, and other audio/video equipment with one touch.Basic operation keys are...
Page 21 - POWER button
21 HOW TO USE THE REMOTE TOCONTROL YOUR LCD REAR PTV POWER button Press this button to turn the TV set on or off when the remote is in TV mode. PICTURE-IN-PICTURE buttons See separate section on pages 25, 26 and 27 for description. 햴 DAY/NIGHT button Press this button to toggle between Day and Night...
Page 22 - CHANNEL selector buttons; Press the VOLUME up (
22 HOW TO USE THE REMOTE TO CONTROL YOUR LCD REAR PTV CHANNEL selector buttons CHANNEL selector buttons are used to select channels, lock access code, etc.Enter one, two, or three numbers to select channels. Enter “0” first for channels 1 to 9 or simply press the single digit channel youwish to tune...
Page 23 - ASPECT button; Use this aspect mode to zoom 16:9 images.
23 ASPECT button Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal, the picture format ratio allows you to adjust the images through the following options. 4:3 Standard Use this aspect mode to display conventional (4:3) images. Side panels (gray areas...
Page 24 - SLEEP button; When in MENU mode, this button will exit all On-Screen Displays.; SURF button; The MENU button will start the On-Screen Display.
24 HOW TO USE THE REMOTE TO CONTROL YOUR LCD REAR PTV SLEEP button Press this button to display the sleep timer in the lower center of the screen. Every subsequent press of this button will add 15minutes to this timer up to a maximum of three hours. Once set, use the INFO button to view time remaini...
Page 25 - PIP button; Main Picture
25 PICTURE-IN-PICTURE (PIP) Your HITACHI LCD Rear PTV incorporates dual tuner technology designed for improved viewing enjoyment. This dual tuner featureallows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. ANT A input can b...
Page 26 - Closed Caption will not appear when SURF mode is on.; PIP MODE button; PIP MODES will depend on the type of input signal.; SPLIT
26 PICTURE-IN-PICTURE (PIP) SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displays the main picture and sub-picture evenly on the screen. SURF button PICTURE-IN-PICTURE This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Pressthe...
Page 27 - Freeze Mode should be in STROBE Freeze
27 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address fora mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE ...
Page 28 - USING THE REMOTE TO CONTROL VCR FUNCTIONS; Operating the precoded function for your VCR.
28 USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR(refer to page 31 for pre-codes). 1. Turn ON your VCR. 2. Aim the remote cont...
Page 29 - Operating the precoded function for your cable/satellite box.; Aim the remote control at the front of your cable/satellite box.; PRECODED CABLE/SATELLITE BOX buttons; These buttons are for operating the TV.
29 USING THE REMOTE TO CONTROLCABLE/SATELLITE BOX FUNCTIONS Operating the precoded function for your cable/satellite box. This remote is designed to operate different types of cable/satellite boxes. You must first program the remote to match the remote sys-tem of your cable/satellite box (refer to p...
Page 30 - USING THE REMOTE TO CONTROL DVD FUNCTIONS; Operating the precoded function for your DVD player.; MY DVD PLAYER CODE IS:
30 USING THE REMOTE TO CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system ofyour DVD player (refer to page 31 for pre-codes). 1. Turn ON your DVD pl...
Page 32 - and
32 ON-SCREEN DISPLAY (OSD) PUSH Locks Chan. Manager Aspect Audio Video Move SEL Sel Setup This part of the screen shows which selections are available. This part of the screen shows which Remote Control buttonsto use. 1. Press MENU on the remote control to display the different features on your HITA...
Page 34 - VIDEO; Use the CURSOR buttons; P i c t u r e M o d e
VIDEO 34 Select VIDEO to adjust picture settings and improve picture quality. You can customize each of the Video Inputs toyour preference to increase viewing performance and pleasure depending upon the video program being viewed. IfRESET is selected, only the selected mode will reset to initial con...
Page 36 - Reset Video; C o l o r M a n a g e m e n t
VIDEO 36 This function allows you to Reset the Video Menu Settings of the present input and return it to the Day Modecondition depending on the selected Video mode. Use CURSOR button or to highlight functions. Press the SELECT button to select RESET VIDEO SETTINGS. Press EXIT to quit menu or select ...
Page 37 - C o l o r D e c o d i n g; Auto Color
VIDEO 37 Use this function to adjust the percentage of Red, Green and Color according to the user’s preference.Use Tint to adjust flesh tones so they appear natural. C o l o r D e c o d i n g Color Decoding Video Move SEL Return Red 50% Green 50% Color 50% Tint Noise Reduction Auto Color Color Decod...
Page 38 - AUDIO
AUDIO 38 Select AUDIO to adjust the TV to your preference and to improve the sound quality. Audio Sound Enhancement Balance Bass Treble Audio Move SEL Return Internal Speakers Audio Source Loudness Auto Noise Cancel 50% Off On Locks Chan. Manager Aspect Audio Video Move SEL Sel Setup On On 45% L R S...
Page 39 - Sound Enhancement; To enter SOUND ENHANCEMENT, use the CURSOR buttons; Technology
AUDIO 39 Sound Enhancement The following surround settings will reproduce the “live” sound you would hear in concert halls,sports stadiums, movie theaters, etc. with only two channels. To enter SOUND ENHANCEMENT, use the CURSOR buttons or to highlight then press the CURSOR buttons or to select Sound...
Page 40 - ASPECT MODE; Aspect Mode
40 ASPECT MODE Aspect Mode Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press CURSOR buttons or to select menu item. Press the SELECT button to select. A “ ✓ ” in the box indicates that the feature is ON. Vertical Position This function allows y...
Page 41 - CHANNEL MANAGER; RECEPTION BAND
CHANNEL MANAGER 41 Select Antenna if you are using an indoor or outdoor antenna. Select Cable if you have cable TV. Use the CURSOR buttons or to highlight the correct Channel Source. Press the SELECT button to select highlighted source. Press EXIT to quit the MENU or select CHAN. MANAGER to return t...
Page 42 - Auto Channel Scan
CHANNEL MANAGER 42 This feature will automatically store active TV channels in AUTO CHANNEL SCAN. This will allow you toskip unused channels when using CHANNEL UP ( ) or DOWN ( ). If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antennas arecon...
Page 43 - Scan
43 CHANNEL MANAGER Press the CURSOR button or to review more channels. Press EXIT to quit the menu or select CHANNEL LIST to return to previous menu. Move SEL Return Ch# Scan CH ID Lock 2 Off -------- 3 Off -------- 4 Off -------- 5 Off -------- 6 Off -------- 7 Off -------- 8 Off -------- 9 Off ---...
Page 44 - Channel ID
44 ON-SCREEN DISPLA Y CHANNEL MANAGER This section contains advanced features which will make TV viewing easier and more enjoyable. Use thisfeature to give up to 20 channels a name when Antenna signal source is selected and up to 60 channelsa name when Cable TV signal source is selected. NOTES: 1. I...
Page 45 - LOCKS
LOCKS 45 ON-SCREEN DISPLA Y This function will block out the picture and sound of the selected channel or video input.It can also be used to keep the TV from being viewed for a scheduled time period that you set. The code to enter the Locks feature is a four digit secret code number. The factory pre...
Page 46 - Use CURSOR; Movie has not been rated or; PG
LOCKS 46 ON-SCREEN DISPLA Y Use MOVIE RATINGS to block from showing any movie you feel might have inappropriate content. Use CURSOR or to select the MOVIE RATING category that you want to block. Press SELECT to block the MOVIE RATING that you have selected. Once rating is selected, for example PG-13...
Page 47 - The program; FV; If you Block TV-14D, you will still permit
LOCKS 47 ON-SCREEN DISPLA Y TV Ratings Move SEL Return Status TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA: Sub Category D L S V FV Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings (Eng) TV Ratings TV Ratings Locks SELECT or TV Parenta...
Page 48 - Canadian Ratings; Canadian Ratings English Table; Programming intended for children under age 8 -; Violence Guidelines Careful
LOCKS 48 Canadian Ratings (Eng) Move SEL Return Status C: C8+: G: PG: 14+: 18+: Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings (Eng) TV Ratings Canadian Ratings (Eng) Locks SELECT or Canadian Ratings English Table Use CANADIAN ...
Page 49 - Canadian Ratings French Table; Programming restricted to adults -
LOCKS 49 Canadian Ratings (Frn) Move SEL Return Status G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings (Eng) TV Ratings Canadian Ratings (Frn) Locks SELECT or Canadian Ratings French Table U...
Page 50 - SETUP; Menu Preference; Setup
SETUP 50 Select SETUP when setting your TV up for the first time. Use the CURSOR or on the remote to highlight the function desired. This feature will allow you to select any one of three different languages for all on-screen displays. Use CURSOR or to highlight the language of your choice. Press SE...
Page 51 - Set The; Option 1
SETUP 51 This function allows you to choose from two menu backgrounds. Use CURSOR or to highlight Set The Menu Background (shaded or solid), and press the SELECT button to select setting. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu.Select Solid for a black background...
Page 53 - Video 2 Auto Link
SETUP 53 Use this feature to give a name to any of the five video inputs. Press CURSOR , , and to highlight the name of the video inputs. Press the SELECT button to select desired input name. Select Reset to set video names to original factory preset condition. Set The Inputs Move SEL Return Video1 ...
Page 54 - Set The Color; Use the CURSOR button
SETUP 54 Set The Color System Set Black Side Panel This function allows you to automatically change tint and color coordinates for DTV programs.HDTV - High Definition Television - Use for High Vision Signal Y-P B P R from HDTV Set-Top Box. SDTV/DVD - Standard Definition Television or DVD (Digital Ve...
Page 56 - Closed Caption; Auto
56 SETUP CLOSED CAPTIONS are the dialogue, narration, and/or sound effects of a television program or home videowhich are displayed on the TV screen. Your local TV program guide denotes these programs as or . Closed Caption Move SEL Return Caption DisplayOff On Auto Analog Captions Mode: Captions Te...
Page 57 - LAMP REPLACEMENT; Lamp Replacement; Do not place any foreign objects inside the lamp compartment.; Install the lamp cover correctly, otherwise power will not come on.; LAMP
57 LAMP REPLACEMENT Lamp Replacement After extended use, if the TV picture turns dark, the color looks unusual or LAMP INDICATOR lightturns on, then it is time to replace the lamp with a new lamp. Lamp Life The lamp life may vary based on usage of the LCD Rear PTV. Turning on and off frequently mays...
Page 58 - POWER; LAMP COMPARTMENT
58 LAMP REPLACEMENT 120V PUSH POWER FRONT COVER 1. Turn off the main power switch and unplug the power cord. Wait at least 30 minutes to allow the lamp to cool down before replacing it. NOTE: THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30~45MINUTES TO ALLOW THE LAMP TO COO...
Page 59 - Push the lamp unit back to its original position.
59 LAMP REPLACEMENT SCREW LAMP COVER PHILLIP HEAD SCREW DRIVER INPUT 5 S-VIDEO EXIT INPUT SELECT MENU VOL- VOL+ CH- CH+ VIDEO AUDIO L/MONO R 3. Remove the screw securing the lamp cover with a Phillips head screw driver as shown. Remove the lamp cover. HANDLE REMOVE SCREWS HANDLE LAMP UNIT 4. Remove ...
Page 60 - Plug power cord into AC outlet and turn on the main power switch.
60 LAMP REPLACEMENT 6. Without installing the lamp cover, the power will be off and the Lamp Indicator will flash (see page 8). Be sure to install the lampcover by re-engaging the two clips and tighten the screws before turning the power on, otherwise it may cause unusual colors. SCREW LAMP COVER PH...
Page 61 - DO; Dust the screen and cabinet with a soft cloth.; DO NOT; Do not touch the screen too often.
61 CARE OF YOUR HITACHI TELEVISIONAND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used ifthe screen is extremely dirty. Place your Television away from extreme heat, hum...
Page 62 - RECEPTION PROBLEMS
62 RECEPTION PROBLEMS • IGNITION NOISE:Black spots or horizontal streaks may appear, picture may flutter or drift.Usually caused by interference from automobile ignition systems, neonlamps, electrical drills, and other electrical appliances. • GHOSTS:Ghosts are caused by the television signal follow...
Page 63 - USEFUL INFO; Press the power switch again.
USEFUL INFO 63 HITACHI Liquid Crystal Display incorporates advanced power surge protection technology designed to protect againstcomponent or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1. Pr...
Page 65 - service; DIAL TOLL FREE; days a week, 24 hours a day; Home Electronics Division
USEFUL INFO 65 Hitachi America, LTD.Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service,a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each...
Page 66 - pour obenir votre copie.; Mississauga, ON L5N 6C3
USEFUL INFO 66 In Canada: 1-800-HITACHI (1-800-448-2244) Monday - Friday EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Hitachi Canada, LTD.Digital Media Division Should you have any questions regarding warranty, service, operation, or technical assistance, please contact: Look for your French Man...
Page 67 - INDEX
67 INDEX INDEX Clock Time, 52 A Date, 52 Closed Captions Accessories, 4 Analog Captions, 56 Antennas (Connecting), 5, 6 Color System, 54 Aspect Ratio, 23 Color Temperature, 35 Audio (Sound Enhancement) Color, 35 SRS, 39 Contrast, 35 BBE, 39 Audio Settings, 38 - 39 D Audio Source, 38 DVI-HDTV, 11, 12...
Page 69 - NOTES
