Page 2 - FEATURES; AV monitor model only)
2 Important Please read this User's Manual thoroughly, especially the SafetyInstructions on Page 4 to 7. Mis-use may cause damage to yourplasma monitor, which could shorten its lifespan, or cause injury toyourself. Should you encounter any difficulty in the set-up oroperation of your monitor, firstl...
Page 3 - ENGLISH; CONTENTS
3 ENGLISH CONTENTS FEATURES .............................................................. 2 SAFETY INSTRUCTIONS ..............................4IMAGE RETENTION OF PLASMA DISPLAY ..8COMPONENT NAMES ..................................9 Main Unit ............................................................
Page 5 - WARNING; Be cautious of the power cord connection.; Be sure to keep safety ground connection.; Be careful in handling the battery of the remote control.
5 ENGLISH WARNING Be cautious of the power cord connection. Incorrect connection of the power cord could result in fire or electrical shock.• Do not touch the power cord with a wet hand.• Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cl...
Page 8 - IMAGE RETENTION OF PLASMA DISPLAY; Notes
8 IMAGE RETENTION OF PLASMA DISPLAY There are different characteristics that result in panel image retention depending on how the plasma display is used.Situations and effective usage methods related to ghosting are provided below. Image retention characteristics of a plasma display The image retent...
Page 9 - COMPONENT NAMES; Control panel; Caution when moving the main unit; Rear
9 ENGLISH COMPONENT NAMES Main Unit Control panel • Adjustment buttons are located on the bottom. • The back cover is provided with indications to distinguishthe adjustment buttons. MENU button SUB-POWER button VOLUME UP/DOWN buttons( ADJUST buttons) INPUT SELECT button (OK button) CHANNELUP/DOWN bu...
Page 10 - Remote control; Loading Batteries; CAUTION; ATTENTION
10 Remote control POWER ON/OFF button INPUT SELECT buttons MENU button OK button SOUND MODE button VOLUME UP/DOWN button PROGRAM SELECT buttons (TV) MULTI MODE button RECALL button FUNCTION SELECT button DVD CONTROL button FREEZE/RETURN buttons SELECT/ADJUST button PICTURE MODE button CH I/CH II but...
Page 12 - NOTE
12 TV / TEXT button CANCEL button INDEX button TEXT / TV + TEXT button PAGE UP / DOWN button COLOR buttons(RED, GREEN, YELLOW, BLUE) SUB TITLE button REVEAL button Buttons on Remote Control This switches the receiver between the TV mode and the TELETEXT mode. Function In TELETEXT mode, this button s...
Page 13 - INSTALLATION INSTRUCTIONS; Securing to a wall or pillar; • Make sure that the power switch of this device is turned off.
• In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set-up) or more between the sides and other objects such as walls, etc.,so that the ventilation holes are not blocked.(*) CAUTION 13 ENGLISH INSTALLATION INSTRUCTIONS Installation Use one of th...
Page 14 - Connecting to an Audio Visual Device; device and the signal output terminal of the imaging device.
14 Connecting to an Audio Visual Device (1) Make sure that the power switch of the monitor is turned off.(2) Make sure that the power switch of the imaging device is turned off.(3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device ...
Page 15 - Precautions when connecting the antenna; Connecting to an Audio Visual Device (continued)
15 ENGLISH When the "ANT" terminal is connected to outdoor antenna instead of CATV system, please note that a goodantenna adaptor is necessary. See the diagram on the right. Precautions when connecting the antenna • Clamp section A using pliers when installing the coaxial cable. If other typ...
Page 16 - Connecting to a PC; terminal of the personal computer.; PC
16 Connecting to a PC (1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device. • See "Product Specifications" concerning the specifications of this device. (2) Make sure that the power switch of the personal computer is t...
Page 17 - Mounting the Speaker Unit; Mounting the Speaker System to the Monitor; Treating the wire ends
17 ENGLISH Mounting the Speaker Unit INSTALLATION INSTRUCTIONS (continued) Make sure that the main power swich of the monitor is turned off (standby or indicating lamp: off/red) when removing or connecting thespeaker cables. CAUTION Make sure to use the speaker systems fastened with the speakerholde...
Page 18 - Attach the speaker cables to speaker systems.
18 Mounting the Speaker Unit (continued) INSTALLATION INSTRUCTIONS (continued) 4. Attach the speaker cables to speaker systems. Connect the copper - colored wire to the Red side. Connect the silver - colored wire to the Black side. Speakerterminals Hold down the lever Release the lever Insert the wi...
Page 19 - Mounting the Side Input; • With the speaker unit; Mount the side input into the speaker holder.; • Without the speaker unit
19 ENGLISH Mounting the Side Input INSTALLATION INSTRUCTIONS (continued) • With the speaker unit 1. Mount the side input into the speaker holder. Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pull them down until it sounds click.Fasten the side input with...
Page 20 - Power Cord Connection
20 INSTALLATION INSTRUCTIONS (continued) Connect the power cord, after completing all other connections. ...42, 32 Connect the power cord to this device. Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.) Power Cord Connection • Use...
Page 21 - OPERATING INSTRUCTIONS; • To turn the monitor power ON, press the main power; Indicating
21 ENGLISH OPERATING INSTRUCTIONS Indicating lamp Main power switch (32) (37) (42) SUB-POWER button POWER ON/OFF button Turning Power On and Off • To turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then pressthe SUB POWER button of control panel or the powe...
Page 22 - Full; Display size selection diagram
22 OPERATING INSTRUCTIONS (continued) INPUT SELECT button CHANNEL UP/DOWN buttons Input Switching Size Switching • Input can be switched by pressing the AV1~6, RGB1 or RGB2 buttons of the remote control. • Input can be switched to TV by pressing CHANNEL UP/DOWN buttons or PROGRAM SELECT buttons. • I...
Page 23 - Press; Using a wide-screen monitor; Display area selection diagram (RGB input)
23 ENGLISH Vertical picture position can be adjusted for [Panoramic], [Zoom] and [Cinema] mode as follows.1. Press ZOOM button and SELECT buttons during picture size display. 2. Position display will appear.3. Adjustment range of each picture size are as shown below. [Panoramic] - 12 to + 12 [Zoom] ...
Page 25 - Power Swivel; Swivel
25 ENGLISH OPERATING INSTRUCTIONS (continued) Power Swivel • This feature controls the motorized stand. It allows turning the plasma display left or right using the remote control. Make sure that the main power switch of the monitor is turned off when removing or connecting the power cord, the conne...
Page 26 - Input Signal Screen Display; TV; VIDEO; RGB
26 OPERATING INSTRUCTIONS (continued) Input Signal Screen Display The input signal status can be displayed on the screenby pressing the RECALL button of the remote control. • The display will go out in approximately 6 seconds. 1 ABCDE -- -- Min. -- -- : -- -- OFF TV Off-timerOn-timer TV position Nam...
Page 27 - Displaying MULTI PICTURE; pictures (Split) 4 pictures 12 pictures; Activating the Split mode from the TV screen; CHANNEL; Activating the 12 pictures mode from the TV screen
27 ENGLISH OPERATING INSTRUCTIONS (continued) Displaying MULTI PICTURE If the MULTI PICTURE button on the remote control ispressed, multi pictures will display. And then three typesof the screen can be selected by pressing the MULTIMODE button on the remote control.The multi picture mode will change...
Page 29 - Picture Freezing
29 ENGLISH OPERATING INSTRUCTIONS (continued) FREEZE button Picture Freezing When the FREEZE button on the remote control is pressed, the screen transfers into thefreeze mode. • There are two types of freezing screen mode, Split and Strobe. These are possible to select at the “Freeze Mode” setting o...
Page 30 - Operating the Photo Input
30 OPERATING INSTRUCTIONS (continued) ROTATE button PHOTO button PHOTO INPUT button SLIDE SHOW button Photo Input Display (37/42 only) With the PHOTO button on the remote control, the pictures from a digital camera or Card Reader can be displayed. Operating the Photo Input 1. Make sure that the powe...
Page 31 - Photo Input Function; Buttons on Remote Control Function; • Specification
Information No message No message “No Connection” “No Connection” “No Connection” “No File” “Loading” 31 ENGLISH OPERATING INSTRUCTIONS (continued) Photo Input Display (37/42 only) (continued) Photo Input Function Buttons on Remote Control Function Operating Thumbnail-Size Image • Select the picture...
Page 35 - Selected characters
35 ENGLISH OPERATING INSTRUCTIONS (continued) SETUP MENU (TV mode) (continued) Selected characters Setup hint Select the channel entry method between position setting or directsetting. And press the OK button to fix it.• If [Position] is selected, the screen display will be numbers (1~199 and AV00)....
Page 39 - FUNCTION MENU
39 ENGLISH FUNCTION MENU MENU Picture Audio Timer Function Setup Language Select OK Set Function Screen Saver Off Screen Wipe On 60Min. Black Side Panel Off Video Power Save Off Freeze Mode Split Default Zoom Panoramic Panel Life Nomal Luminance Manager Off Slide Interval 5Sec. Reset Reset Select Se...
Page 44 - AUDIO MENU
44 OPERATING INSTRUCTIONS (continued) AUDIO MENU MENU Picture Audio Timer Function Setup Language Select OK Set Audio Audio Mode : Movie Treble : + 10 Bass : – 10 Balance : 0 L R Dynamic Bass : Middle Matrix Surround : Off Perfect Volume : Off Reset Reset Select Set Return Audio Headphone Volume : +...
Page 45 - TIMER MENU; LANGUAGE MENU; Off Timer; Setup hint
45 ENGLISH TIMER MENU MENU Picture Audio Timer Function Setup Language Select OK Set Ti m e r Off Timer : 30Min. On Timer : - - : - - Select Adjust Return MENU Picture Audio Timer Function Setup Language Select OK Set Language Select Return Exit English LANGUAGE MENU Select a language by ▲ and ▼ SEL...
Page 47 - BILINGUAL / DUAL sound broadcast; Sound multiplex signal received; NICAM signal received; Audio Switching
47 ENGLISH A2 / NICAM / Sound Multiplex (TV mode) • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect. BILINGUAL / DUAL sound broadcast When bilingual program is received, sound mode display appears in yellow as shown onrigh...
Page 48 - Power Save Mode; When the RGB1, RGB2 input is selected; DVD Player/STB Selection
48 OTHER FUNCTIONS (continued) Power Save Mode When the RGB1, RGB2 input is selected • When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit. Returning to op...
Page 49 - Set up hint; Example) HITACHI DVD
49 ENGLISH OTHER FUNCTIONS (continued) DVD Player/STB Selection (continued) Set up hint Example) HITACHI DVD To operate HITACHI DVD player, press and hold the button, followed by the button. 1. Press button to indicate the lamp of DVD on the remote control.During LED lighting, press and to set up th...
Page 50 - Symptom
39 50 TROUBLESHOOTING Symptoms That Seemingly Appear to be Failures Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. Customer servicing can be hazardous. WARNING Symptom Point to check See page • No picture with the power-in...
Page 51 - Symptoms That Seemingly Appear to be Failures (continued)
51 ENGLISH TROUBLESHOOTING (continued) Symptoms That Seemingly Appear to be Failures (continued) Symptom Point to check See page • If the direct frequency from the computer is below 85Hz, try a higher frequency (upper limit 85Hz). There may be a slightattenuation of the current image. • Try turning ...
Page 52 - Actions to Correct Abnormal Displays
52 TROUBLESHOOTING (continued) Actions to Correct Abnormal Displays Depending on the kind of system equipment used, images may not be displayed normally. In this case, make theadjustments suggested below. (only for RGB2) Symptom 1 Figure 1 Text displayed across the screen appears vertically streaked...
Page 53 - PRODUCT SPECIFICATIONS
PAL B, G, H / I / D, KSECAM B, G / D, K / K1NTSC-M OUTPUT (MONITOR): composite video monitor-output terminal (RCA)OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin) AV1: composite video input terminal (RCA)AV1: Y PB PR video in...
Page 54 - S-input connector pin specifications; Pin; Input signal; Sync signal type; Signal Input
54 Pin 4 3 2 1 Frame 4 3 2 1 Pin RGB terminal (D-sub 15-pin connector) • When different kinds of input signals are simultaneously input to the monitor via a graphics board or the like, the monitor willautomatically select the signals in the following priority order: * Even in the case of the recomme...
Page 55 - Applicable video signals for input terminal; Recommended Signal List
55 ENGLISH D-sub Applicable video signals for input terminal (TV mode) With Composite Input(AV1~AV5 input) and S-video Input (AV3, AV5 input). With component input (AV1, AV2 and RGB2-component input). With HDMI input (AV6 input). ( : Available) PRODUCT SPECIFICATIONS (continued) Recommended Signal L...
Page 56 - With Digital signal input
56 PRODUCT SPECIFICATIONS (continued) Recommended Signal List (continued) With Digital signal input 1 640 X 400 70.08 31.47 25.18 2 640 X 480 59.94 31.47 25.18 3 W-VGA 864 X 480 59.94 31.47 34.24 WVGA type : On 4 640 X 480 72.81 37.86 31.50 5 640 X 480 75.00 37.50 31.50 6 640 X 480 85.01 43.27 36.00...
Page 58 - Screw; 按右图所示,固定用的螺丝钉有胶带贴在柱子上。
Screw NOTE About the Headphone (Refer to page 44.) During PC input (RGB1/RGB2), the audio is not output from the headphone. Only with AV1 and AV6 inputs during the 2 picture mode, even though select “B” from “Audio Menu, Headphone Select,” the audio of A(left picture) is always output from the h...
