Hitachi 288466 - Manual
Hitachi 288466 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 3 – Service; Pressure Relief Procedure
- Page 4 – Repair; Disassembly
- Page 6 – Reassembly
- Page 9 – Parts
- Page 12 – Notes
- Page 13 – Technical Data
- Page 14 – Graco Standard Warranty; Graco Information
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001
311845C
Instructions
Displacement Pump
- For portable spray application of architectural paints and coatings -
Model 288466, 288467, 288468, 288819
3300 psi (22.8 MPa, 25 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Ti8844a
Model 288467/288468
Model 288466
Model 288819
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 311845C Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol aler ts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-s...
Service 311845C 3 Service Pressure Relief Procedure 1. Engage trigger lock. 2. Turn engine ON/OFF switch to OFF. 3. Move pump switch to OFF and turn pressure control knob fully clockwise. 4. Unlock trigger lock. Hold metal part of gun firmly to side of grounded metal pail and trigger gun to relieve ...
Repair 4 311845C Repair See your sprayer instruction manual for complete instructions for removing and installing the pump in your sprayer. Disassembly 1. (Fig. 1) Remove packing nut (3). F IG . 1 2. (Fig. 2) Unscrew intake valve from cylinder. F IG . 2 3. (Fig. 3) Disassemble intake valve. Clean an...
