Hitachi 115VAC - Manual
Hitachi 115VAC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; Document History; Rev B, April 2009 – added 3-position pushbutton pendant control.
- Page 3 – Chapter 1; Chapter 1 – General Description; To use the 115VIF-3 interface in an; WARRANTY
- Page 4 – HIGH VOLTAGE; HAZARD OF ELECTRICAL SHOCK. DISCONNECT INCOMING POWER
- Page 5 – Chapter 2; Chapter 2 – Installation and Wiring; Orientation to Product Features; In the standard version of the 115VIF-3,; OUTPUTS
- Page 6 – INPUT HOIST; NC; Pendant AC
- Page 7 – losest to; Connecting the Board to the Inverter; OUTPUTS2; connector on the board. Align the
- Page 8 – no connection
- Page 9 – Chapter 3; Chapter 3 – Configuring the Inverter; UP; Parameter
- Page 11 – stops/prevents UP motion – only DOWN motion is possible)
- Page 12 – Three-Step Control Wiring
- Page 13 – Chapter 4; Chapter 4 – Operation; Normal Operation; Releasing AC1 at this point will cause the motor speed to ramp down.; Troubleshooting; Inverter will not accelerate beyond minimum speed; Electrical Specifications
- Page 14 – Software State Diagram
- Page 15 – Index; AC Input Wiring · 6
•
SJ200 Series
•
SJ700 Series
NOTE: REFER ALSO TO SJ200 OR SJ700 SERIES INSTRUCTION MANUAL
Hitachi America, Ltd.
Manual Number: HAL1055C
August 2009
After reading this manual,
keep it handy for future reference.
For Crane & Hoist Pendant Applications
Instruction Manual
115 VAC Input Interface Board
115VIF-3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents Page 2 of 16 Table of Contents Table of Contents................................................................................................................... 2 Chapter 1 – General Description .......................................................................................
Chapter 1 Page 3 of 16 Chapter 1 – General Description The 115VIF-3 interface board is used to translate 115 VAC control signals – from crane and hoist operator pendant stations – to the 24 VDC logical input signals required by the SJ200 or SJ700 series of Hitachi inverters. The board provides optic...
Chapter 1 Page 4 of 16 SAFETY PRECAUTIONS HIGH VOLTAGE : This symbol indicates high voltage. It calls your attention to items or operations that could be dangerous to you and other persons operating this equipment. Read the message and follow the instructions carefully. WARNING: Indicates a potentia...
