Hitachi 0S03563 - Manual
Hitachi 0S03563 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hitachi Global Storage Technologies; Page 2
- Page 3 – Page 3
- Page 4 – Page 4; The figure below shows the physical pin location
- Page 5 – Page 5; © 2009 Hitachi Global Storage Technologies
Page 1
version 1.0
Quick Installation Guide
Hitachi Travelstar 7K500
Models:
HTS725050A9A364 HTE725050A9A364
HTS725040A9A364
HTE725040A9A364
HTS725032A9A364
HTE725032A9A364
HTS725025A9A364 HTE725025A9A364
HTS725016A9A364
HTE725016A9A364
HTS725012A9A364
HTS725050A9A361
HTS725050A9A362
HTS725040A9A361
HTS725040A9A362
HTS725032A9A361
HTS725032A9A362
HTS725025A9A361
HTS725025A9A362
HTS725016A9A361
HTS725016A9A362
HTS725012A9A361
HTS725012A9A362
HTS725050A9A360
HTS725040A9A360
HTS725032A9A360
HTS725025A9A360
HTS725016A9A360
HTS725012A9A360
Handling precautions
Set the drive down gently to prevent damage from impact or vibration.
Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components.
Do not press on the top or bottom of the drive.
Before handling the drive, discharge any static electricity from yourself and your clothing. With one hand touch an
unpainted metal surface, then touch the ESD bag with the other hand. Remain in contact with the chassis and the bag
for a minimum of two seconds.
Vibration, shock and static electricity to the drive will damage the precision parts. In particular, prevent vibration or
shock generated by dropping, knocking over or hitting the drive. Also, avoid touching the electrical components
directly, which can discharge electrostatic energy and damage the drive.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Hitachi Global Storage Technologies Page 2 version 1.0 Mounting Recommendations The mounting hole locations and size of the drive are shown in the following illustration:
Hitachi Global Storage Technologies Page 3 version 1.0 The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5 degrees from these positions. Performance and error rate will stay within specification limits if the drive is operated in the othe...
Hitachi Global Storage Technologies Page 4 version 1.0 Interface connector The figure below shows the physical pin location All pins are in a single row, with a 127 mm (0.050”) pitch. The comments on the mating sequence in Table in the section 7.3 apply to the case of back-plane blind-mate con...
