Hisense MWH516B01 - User Manual
Hisense MWH516B01 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
The user manual of TV’s WIFI module
1. The product description
The user can achieve TV connection WIFI net, through this module and the voltage supplied by the system to the
module needs to be transmitted by a voltage regulator or circuit
The module installation method is as follows: pass the large round hole of the module through the limit column of
the bracket of the TV, and fix the module by the snap-fit on the bracket. Connect the external IPEX antenna to the
antenna pedestal of the module
2. Basic parameters
Feature Description
Feature Description
Model
MWH516B.01
Product Name
WiFi/BT Module
Interface
USB2.0
Supply Voltage
5.0V
±
0.2V
Dimension
200
（
mm
）
*19
（
mm
）
*5.41(mm)
Operating Temperature
-10
°
C to 70
°
C
Storage Temperature
-40
°
C to 85
°
C
3. RF output power
Band
Limited power
WlAN
2400MHZ-2483.5MHZ
<20dBm
5150-5350 MHz, 5470-5850MHz
BT
2400MHz-2483.5MHz
<20dBm
4. The display method of Model approved code
In the factory
，
the model approve code is pasted on the back shell in a label.
5. Radiation Exposure Statement
This equipment complies with radiation exposure limits set forth for an uncontrolled environment and it also complies
with Part 15 of RF Rules. This equipment should be installed and operated with minimum distance of 20 in (50cm)
between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter
CAUTION:
To comply with the limits of the Class B digital device pursuant to Part 15 of the Rules, this device is compliant with Class
B limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables
may results in interference to radio or reception
MODIFICATION
To assure continued compliance, Any changes or modifications not expressly approved by the grantee of this device
could void the users authority to operate the device.
6. Radiation Exposure Statement
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance of 50 cm(8 in )between the radiator and your body NOTE To satisfy
exterior labeling requirements, the following text must be placed on the exterior of the end product Contains Transmitter
module To satisfy IESD exterior labeling requirements, the following text must be placed on the exterior of the end
product " Contains Transmitter module
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
