Hisense MW14S E1 - User Manual
Hisense MW14S E1 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Power consumption requirements; The display method of Model approved code
- Page 3 – void the users authority to operate the device.; Radiation Exposure Statement; Transmitter module FCC ID: 2A4A3MW14S-E1
- Page 4 – service or the shop where you purchased the product.
The user manual of WIFI
、
Bluetooth module
1. The product description
The user can achieve the terminal equipment connection WIFI net and Bluetooth, through this module
This equipment may be operated in all European countries.
2. Interface
◆
Interface
16pin stamp hole
◆
Pin definition
PIN
Name
Function
Remark
PIN1
GND
GND
GND
PIN2
VCC
VCC
3.3V
PIN3
NC
PIN4
RX Log
RX Log
Download and capture log
PIN5
TX Log
TX Log
Download and capture log
PIN6
TX
TX
TLL level
PIN7
RX
RX
TLL level
PIN8
GND
GND
GND
PIN9
GND
GND
GND
PIN10
GPIO_2
GPIO (Reserved)
PIN11
GPIO_1
GPIO (Reserved)
PIN12
RESET
Hardware Reset
Module Reset when pull down
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PIN13 NC PIN14 DL_MODE Forced download In download mode when pull up PIN15 NC PIN16 GND GND GND ◆ Power consumption requirements The maximum working current is not more than 500mA, the instantaneous maximum current is not more than 700mA; In standby mode, the power supply of the module shall be no l...
6. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use...
service or the shop where you purchased the product.
